Hi all, Last year, we installed a cockpit table based on a Lagun structure and a skimboard. Yes, after looking for months for the perfect table top, a light bulb switched on in the fun sports

Hi all, if, when starting your Furuno Navnet 3D MFD, you see a black screen with an “American Megatrend” logo, all sorts of lines of text and a mention of “CMOS date/time not set” towards the

These are great informations, thank you very much Paul, Danny and Bill. .

In 2015, 2 months after we bought Viva (Hull #374) I realized that the black tank 90 valve was not working: vertical or horizontal same result. The black tank cannot be closed ... embarrassing. A

I tried the same. Spray adhesive from a home improvement store seems to work quite well. And it isn't labeled "marine" so it's reasonably priced. :) -- Scott 2007 A54 #69 SV

Mark, We got you!

Hi Scott, It is on starboard side on the rail Greetings from Wolfgang Weber SY Elise Amel 54#162 Fort Lauderdale

Hi Paul, VERY familiar with that problem. Our gearbox was actually past it's use by so we set to and cut through the gear to extract the shaft. It wouldn't come out even with a hydraulic press. The

Karen, I wanted to make sure we were still on the list. Thanks, Mark S/V It’s Good SM #105 Gloucester, VA

Hi Scott, On a side note, we found the app ‘iWatchSat’ very useful to find out sat coverage. It’s very simple and it helps to plan your call/grib fetch. We found waiting for good coverage is

Fred, Thanks for that. As you know I do not have a recommendation for bearing grease. The manufacturer of MD 466 EP is Sogelub. They recommend it as a solution for metal-to-metal surfaces. This

Thanks Dan right now I keep mine in the Aft Lazarette there’s a place to mount it but it’s a pain keeping it on the Rail seems like a better option Thanks Courtney Trippin 54#101 Cheers

A few years ago I purchased bonfoglioli gear boxes from an outfit in Baltimore. They were $125 each. Aras Sharki #163

Wolfgang, What do you mean same place ? On star board side of arch or on star board rail? -- Scott 2007 A54 #69 SV Tengah http://www.svtengah.com

Have problem to dismantle the shaft (see picture) from the main furling gear box. I need to get off the Aluminum "NOB" that connect to the main furler. The inner shaft with the Aluminium "NOB" is

Hi Bill and thank you again for the effort to ease the sailor's life. May I just make a little addition to this, even if the products you're referencing are excellents ? I was trained in La Rochelle

Hi Courtney, we keep it there all of the time. Just finished beating from Panama to the Dominican Republic via Cartagena. I feel more secure with it there than in the rear lazarette. It feels

I’ve used an Iridium Go on a ocean trip once and did not use an external antenna at all. If you put the put the device under the sprayhood it works fine. You can get a waterproof USB cable for the

We have enough people interested in signing on, it's looking like a go. We'll be in touch with the manufacturer Monday morning to deliver a sample off Harmonie so they can design the die, get

No, they kept the original Amel spec. -- Scott 2007 A54 #69 SV Tengah http://www.svtengah.com