|
Re: ZOOM Meeting Technical Questions:
#ZOOM
Hi Tilo
I’m interested to join! Please put me on the list.
Regards from Zurich
Ruedi Waldispuehl
WASABI A54. #55
Von: "main@AmelYachtOwners.groups.io" <main@AmelYachtOwners.groups.io> on behalf
Hi Tilo
I’m interested to join! Please put me on the list.
Regards from Zurich
Ruedi Waldispuehl
WASABI A54. #55
Von: "main@AmelYachtOwners.groups.io" <main@AmelYachtOwners.groups.io> on behalf
|
By
WASABI - Rudolf Waldispuehl
·
#51675
·
|
|
FW: [AmelYachtOwners] ZOOM Meeting of Members
#ZOOM
#poll
Hi Bill
I’m interested to join! Please put me on the list. These is a great idea, thanks.
Schedule is fine for me, Topics 2 and 6 are my favourites.
Sorry I’m probably a bit late because I was
Hi Bill
I’m interested to join! Please put me on the list. These is a great idea, thanks.
Schedule is fine for me, Topics 2 and 6 are my favourites.
Sorry I’m probably a bit late because I was
|
By
WASABI - Rudolf Waldispuehl
·
#51674
·
|
|
Re: Switch on Bilge Float Tube
Hello Heinz,
Thank you very much for your interest into the IDN system.
Could you please send an e-mail to me at: diego.demiguel@... ? then I will reply your e-mail with more detailed info, technichal
Hello Heinz,
Thank you very much for your interest into the IDN system.
Could you please send an e-mail to me at: diego.demiguel@... ? then I will reply your e-mail with more detailed info, technichal
|
By
Diego de Miguel (Sailing Living Lab) Amel Sharki
·
#51673
·
|
|
Re: Switch on Bilge Float Tube
Thanks to you Ian.
I am planning to cross the Atlantic in december and to go to Florida.
I see that you are in Fort Lauderdale, so we will be able to meet each other in the real world :-)
All the
Thanks to you Ian.
I am planning to cross the Atlantic in december and to go to Florida.
I see that you are in Fort Lauderdale, so we will be able to meet each other in the real world :-)
All the
|
By
Diego de Miguel (Sailing Living Lab) Amel Sharki
·
#51672
·
|
|
Re: Membrane Tube end caps
Hey all, not to drift the thread slightly, but my dessalator has been leaking pure product water from somewhere in the assembly I've yet to trace. It isn't coming from the two fresh water hoses that
Hey all, not to drift the thread slightly, but my dessalator has been leaking pure product water from somewhere in the assembly I've yet to trace. It isn't coming from the two fresh water hoses that
|
By
Davi Rozgonyi
·
#51671
·
|
|
Re: Membrane Tube end caps
Just after buying Aquarius I had new membranes installed, and the white nylon end caps were no good, so I had them replaced them with brand new black ones from Dessalator. Two years later in New
Just after buying Aquarius I had new membranes installed, and the white nylon end caps were no good, so I had them replaced them with brand new black ones from Dessalator. Two years later in New
|
By
Ken Powers SV Aquarius <ken@...>
·
#51670
·
|
|
Re: ZOOM Meeting of Members
#ZOOM
#poll
Peter,
I added you. You need to cast the vote yourself. I cannot do that for you. CLICK HERE TO VOTE: Vote Now
Peter,
I added you. You need to cast the vote yourself. I cannot do that for you. CLICK HERE TO VOTE: Vote Now
|
By
CW Bill Rouse
·
#51669
·
|
|
B&G LED Replacement
Does anyone have a source for a replacement LED for aB&G Hydra 2000 8-button display?
With best regards,
Mark
Skipper
Sailing Vessel - Cream Puff - SM2K - #275
Currently cruising -
Does anyone have a source for a replacement LED for aB&G Hydra 2000 8-button display?
With best regards,
Mark
Skipper
Sailing Vessel - Cream Puff - SM2K - #275
Currently cruising -
|
By
Mark Erdos
·
#51668
·
|
|
Re: tb/custom broker BRISBANE/COOMERA QLD AUSTRALIA/AYOGF
To all, non-AUSTRALIAN, AMEL owners planning to bring major parts, equipment into AUSTRALIA tax-free under the international customary “YACHTS IN TRANSIT” schedule.
Following up on my earlier
To all, non-AUSTRALIAN, AMEL owners planning to bring major parts, equipment into AUSTRALIA tax-free under the international customary “YACHTS IN TRANSIT” schedule.
Following up on my earlier
|
By
Teun BAAS
·
#51667
·
|
|
Re: ZOOM Meeting of Members
#ZOOM
#poll
Hi Bill
Please put me on the list. I like this idea of an virtual event.
Schedule is fine for me, Topics 2 and 6 are my favourites.
Thx
Peter
SM 003 / Neustadt i.H.
(Sent from mobile device)
Hi Bill
Please put me on the list. I like this idea of an virtual event.
Schedule is fine for me, Topics 2 and 6 are my favourites.
Thx
Peter
SM 003 / Neustadt i.H.
(Sent from mobile device)
|
By
Peter Jaeger
·
#51666
·
|
|
Re: Membrane Tube end caps
Hi, I echo the call to be careful when dismissing the equipment Amel has installed.
while everyone has their own experiences of a variety of Amel systems and equipment it must always be remembered
Hi, I echo the call to be careful when dismissing the equipment Amel has installed.
while everyone has their own experiences of a variety of Amel systems and equipment it must always be remembered
|
By
Danny and Yvonne SIMMS
·
#51665
·
|
|
Re: Membrane Tube end caps
Expensive. But I’ve had nothing but top notch support froM desalator as well. Weekends, evenings in France doesn’t matter. And fast delivery.
Porter
A54-152
Expensive. But I’ve had nothing but top notch support froM desalator as well. Weekends, evenings in France doesn’t matter. And fast delivery.
Porter
A54-152
|
By
Porter McRoberts
·
#51664
·
|
|
Re: Membrane Tube end caps
I would highly recommend Martin Dee Jon of Dessalator. He can be reached at +34-637-890-333 or +33-607-346-511. We have always found him to be responsive and knowledgeable in the past 5 years.
I would highly recommend Martin Dee Jon of Dessalator. He can be reached at +34-637-890-333 or +33-607-346-511. We have always found him to be responsive and knowledgeable in the past 5 years.
|
By
Mohammad Shirloo
·
#51663
·
|
|
Re: Membrane Tube end caps
I have tried to use the Florida Dessalator service company called Multi-Tech. For those of us in North America, I would not recommend them at all. Did not return several calls or emails. Finally, I
I have tried to use the Florida Dessalator service company called Multi-Tech. For those of us in North America, I would not recommend them at all. Did not return several calls or emails. Finally, I
|
By
Ian Townsend
·
#51662
·
|
|
Re: Membrane Tube end caps
Han, I had end caps made out of delrin in St Martin. The machine shop is E&Msc. It is behind Lagoonies. The machinist made a few changes to beef them up. I have run them now for two years with no
Han, I had end caps made out of delrin in St Martin. The machine shop is E&Msc. It is behind Lagoonies. The machinist made a few changes to beef them up. I have run them now for two years with no
|
By
John Clark
·
#51661
·
|
|
Re: Membrane Tube end caps
Jean-Pierre
I think it‘s unfair to broadcast such negative things about Desal, . Amel is still installing Desal Watermakers and I had very good experiances with SAV Dessalator. Mr Wagner jun. and
Jean-Pierre
I think it‘s unfair to broadcast such negative things about Desal, . Amel is still installing Desal Watermakers and I had very good experiances with SAV Dessalator. Mr Wagner jun. and
|
By
hanspeter baettig
·
#51660
·
|
|
Re: ZOOM Meeting of Members
#ZOOM
#poll
Keith,
done, sent you a private email
CW Bill Rouse
Keith,
done, sent you a private email
CW Bill Rouse
|
By
CW Bill Rouse
·
#51659
·
|
|
Re: ZOOM Meeting of Members
#ZOOM
#poll
Hi Bill,
Please add me to the list, to Listen and to Watch.
Thanks, Keith, SY Bikini, SM 282
Hi Bill,
Please add me to the list, to Listen and to Watch.
Thanks, Keith, SY Bikini, SM 282
|
By
Keith Tice
·
#51658
·
|
|
Re: ZOOM Meeting of Members
#ZOOM
#poll
Will do. You will receive a direct email.
Best,
CW Bill Rouse
Amel Owners Yacht School
+1 832-380-4970 | brouse@...
720 Winnie, Galveston Island, Texas 77550
www.AmelOwnersYachtSchool.com
Yacht
Will do. You will receive a direct email.
Best,
CW Bill Rouse
Amel Owners Yacht School
+1 832-380-4970 | brouse@...
720 Winnie, Galveston Island, Texas 77550
www.AmelOwnersYachtSchool.com
Yacht
|
By
CW Bill Rouse
·
#51657
·
|
|
Re: ZOOM Meeting of Members
#ZOOM
#poll
Hi Bill
Please add my husband and me at Laurie.mcreid@...
Future SM owners
Laurie & John
Ottawa, Ontario
Hi Bill
Please add my husband and me at Laurie.mcreid@...
Future SM owners
Laurie & John
Ottawa, Ontario
|
By
Laurie McCall
·
#51656
·
|