|
Re: Flushing the water maker with fresh water
Yes, but many thanks. Good thing to check. Cheers. Joerg
Yes, but many thanks. Good thing to check. Cheers. Joerg
|
By
Joerg Esdorn
·
#52049
·
|
|
Re: Ral Nr. for the red boat stripe on A54
Thank you Bill
--
Nicolas Klene
DarNico
SM2K # 471
In Marseille
Thank you Bill
--
Nicolas Klene
DarNico
SM2K # 471
In Marseille
|
By
Nicolas Klene
·
#52048
·
|
|
Re: Flushing the water maker with fresh water
Joerg,
I am sure you know this. The pressure knob on the control panel should be 100% anti-clockwise when flushing.
Bill
Joerg,
I am sure you know this. The pressure knob on the control panel should be 100% anti-clockwise when flushing.
Bill
|
By
CW Bill Rouse
·
#52047
·
|
|
Re: Washing Machine and 50 htz
Hi Barry,
Sorry for late reply.
As soon as I have a copy of the policy I will send you the requested information.
However, so far nothing. This is the latest feedback I have from the agent:
Hi Barry,
Sorry for late reply.
As soon as I have a copy of the policy I will send you the requested information.
However, so far nothing. This is the latest feedback I have from the agent:
|
By
Teun BAAS
·
#52046
·
|
|
Re: Racor Dual Fuel Filter
Hi Bernd;
We always use ours on an individual filter setting. We change out the used filter, when we service the engine and generator annually. We currently put about 200 hours on the engine
Hi Bernd;
We always use ours on an individual filter setting. We change out the used filter, when we service the engine and generator annually. We currently put about 200 hours on the engine
|
By
Mohammad Shirloo
·
#52045
·
|
|
Re: Flushing the water maker with fresh water
Thanks very much, Gary!
By
Joerg Esdorn
·
#52044
·
|
|
Re: Racor Dual Fuel Filter
If your asking me, I have a caucus gauge on a T on the output of both filters. When the gauge reaches a certain vacuum reading, I switch filters. Also, if on a long motor passage, there is a sudden
If your asking me, I have a caucus gauge on a T on the output of both filters. When the gauge reaches a certain vacuum reading, I switch filters. Also, if on a long motor passage, there is a sudden
|
By
Matt Salatino
·
#52043
·
|
|
Racor Dual Fuel Filter
Hi! How do you use your Racor? Just installed it on my SN .
Meaning
-when do you use a single filter?
-when donyou use both?
-when do you switch from one to the other?--
Bernd
SN 119 / Cascais,
Hi! How do you use your Racor? Just installed it on my SN .
Meaning
-when do you use a single filter?
-when donyou use both?
-when do you switch from one to the other?--
Bernd
SN 119 / Cascais,
|
By
Bernd Spanner
·
#52042
·
|
|
Re: Flushing the water maker with fresh water
Hi Joerg:
The video you posted appears to be about right of flush water. My flush system (the automatic timer one I built over a decade ago for my Dessalator 160 l/hr factory system, so as to never
Hi Joerg:
The video you posted appears to be about right of flush water. My flush system (the automatic timer one I built over a decade ago for my Dessalator 160 l/hr factory system, so as to never
|
By
Gary Silver
·
#52041
·
Edited
|
|
Re: Super Maramu graphics for use on clothing
Hi Mawgan,
I sent you a messenger not so long ago after identifying you were sailing on SM here in Hong Kong thanks to the Amel Yacht Owner Group on Facebook.
If after 5 years you are still looking
Hi Mawgan,
I sent you a messenger not so long ago after identifying you were sailing on SM here in Hong Kong thanks to the Amel Yacht Owner Group on Facebook.
If after 5 years you are still looking
|
By
Alex R.H. D.
·
#52040
·
|
|
Flushing the water maker with fresh water
My boat is sheltering in place on the hard and the water maker has been pickled since November 2019. Dessalator instructions say that the maximum period of pickling is 6 months. After that, they
My boat is sheltering in place on the hard and the water maker has been pickled since November 2019. Dessalator instructions say that the maximum period of pickling is 6 months. After that, they
|
By
Joerg Esdorn
·
#52039
·
|
|
Re: Parasailor on A54
Good questions, Scott. Here are my answers:
1. I've not seen any chafe and I know literally thousands of boats use the Tacker for their cruising chutes. I know because my father had one in 1987!
Good questions, Scott. Here are my answers:
1. I've not seen any chafe and I know literally thousands of boats use the Tacker for their cruising chutes. I know because my father had one in 1987!
|
By
Joerg Esdorn
·
#52038
·
|
|
Re: Parasailor on A54
Joerg,
A few questions for you:
1) So you've not seen any chafing on the Genoa from the ATN? It seems like you're saying that the ATN may not be good for ocean crossings?
2) How does it do at 150-180
Joerg,
A few questions for you:
1) So you've not seen any chafing on the Genoa from the ATN? It seems like you're saying that the ATN may not be good for ocean crossings?
2) How does it do at 150-180
|
By
Scott SV Tengah
·
#52037
·
|
|
Upcoming Event: Zoom Meeting Subject to be announced - Sat, 05/16/2020 20:00-21:00, Please RSVP
#cal-reminder
Reminder: Zoom Meeting Subject to be announced
When: Saturday, 16 May 2020, 20:00 to 21:00, (GMT+00:00) UTC
Where:The times will be announced
An RSVP is requested. Click here to
Reminder: Zoom Meeting Subject to be announced
When: Saturday, 16 May 2020, 20:00 to 21:00, (GMT+00:00) UTC
Where:The times will be announced
An RSVP is requested. Click here to
|
By
main@AmelYachtOwners.groups.io Calendar <main@...>
·
#52036
·
|
|
Re: ZOOM Meeting future meetings:
#ZOOM
#IMPORTANT
Fantastic initiative, Bill, well done to all those involved!
I look forward to joining the next Zoom meeting!
Kind regards,
Guillaume
s/v Carpathia III – SM2K #293
Fantastic initiative, Bill, well done to all those involved!
I look forward to joining the next Zoom meeting!
Kind regards,
Guillaume
s/v Carpathia III – SM2K #293
|
By
Cathy & Guillaume
·
#52035
·
|
|
Re: mainsail and Genoa halyards length for AMEL SM
Jarek,
Maybe I can help. Bill Rouse <brouse@...>. I would be happy to answer any of your questions.
Jarek,
Maybe I can help. Bill Rouse <brouse@...>. I would be happy to answer any of your questions.
|
By
CW Bill Rouse
·
#52034
·
|
|
mainsail and Genoa halyards length for AMEL SM
Hello,
I have question regarding the length of halyards for mainsail, mizzen sail and genoa sail. I saw the specification in the fine folder (running rigging specs) but have my doubt and due to the
Hello,
I have question regarding the length of halyards for mainsail, mizzen sail and genoa sail. I saw the specification in the fine folder (running rigging specs) but have my doubt and due to the
|
By
Jarek Zemlo
·
#52033
·
|
|
Interested to purchase A-55 of 2013-2017 in replacement of my A-54 2011.
#replacement
all suggestions are welcome to 41greg.marine@...
Thanks
Greg
all suggestions are welcome to 41greg.marine@...
Thanks
Greg
|
By
greg greg
·
#52032
·
|
|
Updated Event: Zoom Meeting Subject to be announced - Saturday, 16 May 2020
#cal-invite
Zoom Meeting Subject to be announced
When:
Saturday, 16 May 2020
20:00 to 21:00
(UTC+00:00) UTC
Where:
The times will be announced
An RSVP is requested. Click here to RSVP
Description:
Subject To
Zoom Meeting Subject to be announced
When:
Saturday, 16 May 2020
20:00 to 21:00
(UTC+00:00) UTC
Where:
The times will be announced
An RSVP is requested. Click here to RSVP
Description:
Subject To
|
By
main@AmelYachtOwners.groups.io Calendar <main@...>
·
#52031
·
|
|
ZOOM Meeting future meetings:
#ZOOM
#IMPORTANT
All,
If you missed our first ZOOM meeting, you can view it on YouTube: https://youtu.be/7Mm1bbL-PaA The first meeting was a test to understand the process. We did not have an expert guest speaker but
All,
If you missed our first ZOOM meeting, you can view it on YouTube: https://youtu.be/7Mm1bbL-PaA The first meeting was a test to understand the process. We did not have an expert guest speaker but
|
By
CW Bill Rouse
·
#52030
·
|