Hello Richie. Congratulations on your new Super Maramu (Why Knot, formerly Guma) and welcome to the Amel Owner’s group! There is an Amel Owner’s Registry used by owners to contact each other. It

Hi Richie, The location you selected would not be my first choice, as (at least on our boat) that side of the bulkhead is covered in the same vinyl material as the headliner. No doubt you could drill

Bill, Are these instructions in your book? Cheers, Paul S/Y Ya Fohi - Amel 54 #98 - Grenada

Hi Eric She is being registered in Ireland. She was previously registered in the UK but with the UK leaving the EU we wanted to protect her EU VAT paid status and we couldn't get a straight answer

Hi, In what country is the boat being registered? Fair Winds Eric Amel Super Maramu #376

Hi Folks, I’m a recent SM purchaser and as part of my boat registration procedure I need to attach a stainless steel plate (10cm x15cm) etched with the registration details to the bulkhead under

Same as that on LLII. But sorry, no specs. Sent from my Samsung Galaxy smartphone.

Hi Ryan, it is identical to what we have on Ocean Pearl Kind Regards Danny SM 299 Ocean Pearl

Hi Ryan and Kelly. All early Amel Super Maramu boats had stainless steel mufflers and the one in the picture of your boat is indeed original equipment. The change to Vetus plastic occurred when the

Ryan, Early SM’s had SS mufflers; mine has... A good SS person can cut into it and replicate the unit. I had my new one made in NZ GOOD luck Jean-Pierre Germain, SY Eleuthera,SM 007

That's original. I don't have any info. I think I would eliminate it, although it would be convenient to keep the pressure gauge. I think modern pumps regulate pressure good enough. Best, CW Bill

No. That is original, but I thought I remembered the PO fabricating a SS muffler. My mistake. Best, CW Bill Rouse Amel Owners Yacht School +1 832-380-4970 | brouse@... 720 Winnie, Galveston Island,

Hi Bill, That's certainly possible, but I thought I've seen others like it on other SMs, and it has the same non-skid as the top of the engine. I've attached a photo. Does that look custom to

Hi all, Our boat has a device in the fresh water system just after the pump (photos attached) that I think is a pressure regulator. It reads "Caleffi Mod Dep Cartridge With Filter". I can't find an

I believe that your stainless muffler was probably fabricated by a previous owner.

Hi all, Our stainless muffler has started to rust out, and I'd like to replace it while I'm also replacing the turbo and mixing elbow. I'd rather not go with the plastic Vetus that seems to be the

Bill, Ulrich, Eric, Thank you very much for your immediate help and the ensuing focus which enabled me to “unlock” the maintenance operations at the yard Best to you all Paolo SM 454

I don't know, but I can guess. I think Amel used that same "mechanical furl" gearbox with some vertical electric furling motors (later model 54 main furler). This may be the reason the drain holes

Hi Thomas; We had the same stiffening within a year of purchasing Kokomo. It got progressively worse to a point that we felt we may be damaging the gears by placing the amount of force required to

Hello, As the old B&G Hydra system gave up on our 54, and also the sonic speed system failed. I did not see a reasonable way to go on and repair the old system. So we renewed the windvane and use