|
Re: Bulkhead Thickness & Screw length
Hi Richie,
Amel mounted my registration in the back of the hanging locker against the hull.
I don’t know if that is legal in Ireland.
Fair Winds
Eric
Amel Super Maramu #376
Hi Richie,
Amel mounted my registration in the back of the hanging locker against the hull.
I don’t know if that is legal in Ireland.
Fair Winds
Eric
Amel Super Maramu #376
|
By
eric freedman
·
#52134
·
|
|
Re: Bulkhead Thickness & Screw length
Hi Richie,
Fair winds with your new boat. I registered my SM in Drogheda, they happily accepted the plate screwed onto the wooden frame beneath the floor locker.
Be aware that Irish
Hi Richie,
Fair winds with your new boat. I registered my SM in Drogheda, they happily accepted the plate screwed onto the wooden frame beneath the floor locker.
Be aware that Irish
|
By
Trevor Lusty
·
#52133
·
|
|
Re: sonic speed on SM 2000
Paul,
Yes, and they have been recently updated. I sent you an email on how to update your book.
Bill
Paul,
Yes, and they have been recently updated. I sent you an email on how to update your book.
Bill
|
By
CW Bill Rouse
·
#52132
·
|
|
Re: Bulkhead Thickness & Screw length
Hello Richie. Congratulations on your new Super Maramu (Why Knot, formerly Guma) and welcome to the Amel Owner’s group! There is an Amel Owner’s Registry used by owners to contact each other. It
Hello Richie. Congratulations on your new Super Maramu (Why Knot, formerly Guma) and welcome to the Amel Owner’s group! There is an Amel Owner’s Registry used by owners to contact each other. It
|
By
Brent Cameron
·
#52131
·
|
|
Re: Bulkhead Thickness & Screw length
Hi Richie,
The location you selected would not be my first choice, as (at least on our boat) that side of the bulkhead is covered in the same vinyl material as the headliner. No doubt you could drill
Hi Richie,
The location you selected would not be my first choice, as (at least on our boat) that side of the bulkhead is covered in the same vinyl material as the headliner. No doubt you could drill
|
By
Ryan Meador
·
#52130
·
|
|
Re: sonic speed on SM 2000
Bill,
Are these instructions in your book?
Cheers,
Paul
S/Y Ya Fohi - Amel 54 #98 - Grenada
Bill,
Are these instructions in your book?
Cheers,
Paul
S/Y Ya Fohi - Amel 54 #98 - Grenada
|
By
Paul Dowd and Sharon Brown
·
#52129
·
|
|
Re: Bulkhead Thickness & Screw length
Hi Eric
She is being registered in Ireland. She was previously registered in the UK but with the UK leaving the EU we wanted to protect her EU VAT paid status and we couldn't get a straight answer
Hi Eric
She is being registered in Ireland. She was previously registered in the UK but with the UK leaving the EU we wanted to protect her EU VAT paid status and we couldn't get a straight answer
|
By
Richie Whyte
·
#52128
·
|
|
Re: Bulkhead Thickness & Screw length
Hi,
In what country is the boat being registered?
Fair Winds
Eric
Amel Super Maramu #376
Hi,
In what country is the boat being registered?
Fair Winds
Eric
Amel Super Maramu #376
|
By
eric freedman
·
#52127
·
|
|
Bulkhead Thickness & Screw length
Hi Folks,
I’m a recent SM purchaser and as part of my boat registration procedure I need to attach a stainless steel plate (10cm x15cm) etched with the registration details to the bulkhead under
Hi Folks,
I’m a recent SM purchaser and as part of my boat registration procedure I need to attach a stainless steel plate (10cm x15cm) etched with the registration details to the bulkhead under
|
By
Richie Whyte
·
#52126
·
|
|
Re: TMD22 stainless steel muffler diagrams?
Same as that on LLII. But sorry, no specs.
Sent from my Samsung Galaxy smartphone.
Same as that on LLII. But sorry, no specs.
Sent from my Samsung Galaxy smartphone.
|
By
Ian Townsend
·
#52125
·
|
|
Re: TMD22 stainless steel muffler diagrams?
Hi Ryan, it is identical to what we have on Ocean Pearl
Kind Regards
Danny
SM 299 Ocean Pearl
Hi Ryan, it is identical to what we have on Ocean Pearl
Kind Regards
Danny
SM 299 Ocean Pearl
|
By
Danny and Yvonne SIMMS
·
#52124
·
|
|
FW: [AmelYachtOwners] TMD22 stainless steel muffler diagrams?
Hi Ryan and Kelly. All early Amel Super Maramu boats had stainless steel mufflers and the one in the picture of your boat is indeed original equipment. The change to Vetus plastic occurred when the
Hi Ryan and Kelly. All early Amel Super Maramu boats had stainless steel mufflers and the one in the picture of your boat is indeed original equipment. The change to Vetus plastic occurred when the
|
By
amelforme
·
#52123
·
|
|
Re: TMD22 stainless steel muffler diagrams?
Ryan,
Early SM’s had SS mufflers; mine has...
A good SS person can cut into it and replicate the unit. I had my new one made in NZ
GOOD luck
Jean-Pierre Germain, SY Eleuthera,SM 007
Ryan,
Early SM’s had SS mufflers; mine has...
A good SS person can cut into it and replicate the unit. I had my new one made in NZ
GOOD luck
Jean-Pierre Germain, SY Eleuthera,SM 007
|
By
Germain Jean-Pierre
·
#52122
·
|
|
Re: water pressure regulator adjustment
That's original. I don't have any info. I think I would eliminate it, although it would be convenient to keep the pressure gauge. I think modern pumps regulate pressure good enough.
Best,
CW Bill
That's original. I don't have any info. I think I would eliminate it, although it would be convenient to keep the pressure gauge. I think modern pumps regulate pressure good enough.
Best,
CW Bill
|
By
CW Bill Rouse
·
#52121
·
|
|
Re: TMD22 stainless steel muffler diagrams?
No. That is original, but I thought I remembered the PO fabricating a SS muffler. My mistake.
Best,
CW Bill Rouse
Amel Owners Yacht School
+1 832-380-4970 | brouse@...
720 Winnie, Galveston Island,
No. That is original, but I thought I remembered the PO fabricating a SS muffler. My mistake.
Best,
CW Bill Rouse
Amel Owners Yacht School
+1 832-380-4970 | brouse@...
720 Winnie, Galveston Island,
|
By
CW Bill Rouse
·
#52120
·
|
|
Re: TMD22 stainless steel muffler diagrams?
Hi Bill,
That's certainly possible, but I thought I've seen others like it on other SMs, and it has the same non-skid as the top of the engine. I've attached a photo. Does that look custom to
Hi Bill,
That's certainly possible, but I thought I've seen others like it on other SMs, and it has the same non-skid as the top of the engine. I've attached a photo. Does that look custom to
|
By
Ryan Meador
·
#52119
·
|
|
water pressure regulator adjustment
Hi all,
Our boat has a device in the fresh water system just after the pump (photos attached) that I think is a pressure regulator. It reads "Caleffi Mod Dep Cartridge With Filter". I can't find an
Hi all,
Our boat has a device in the fresh water system just after the pump (photos attached) that I think is a pressure regulator. It reads "Caleffi Mod Dep Cartridge With Filter". I can't find an
|
By
Ryan Meador
·
#52118
·
|
|
Re: TMD22 stainless steel muffler diagrams?
I believe that your stainless muffler was probably fabricated by a previous owner.
I believe that your stainless muffler was probably fabricated by a previous owner.
|
By
CW Bill Rouse
·
#52117
·
|
|
TMD22 stainless steel muffler diagrams?
Hi all,
Our stainless muffler has started to rust out, and I'd like to replace it while I'm also replacing the turbo and mixing elbow. I'd rather not go with the plastic Vetus that seems to be the
Hi all,
Our stainless muffler has started to rust out, and I'd like to replace it while I'm also replacing the turbo and mixing elbow. I'd rather not go with the plastic Vetus that seems to be the
|
By
Ryan Meador
·
#52116
·
|
|
Re: Lubricant Oil for the z drive
Bill, Ulrich, Eric,
Thank you very much for your immediate help and the ensuing focus which enabled me to “unlock” the maintenance operations at the yard
Best to you all
Paolo
SM 454
Bill, Ulrich, Eric,
Thank you very much for your immediate help and the ensuing focus which enabled me to “unlock” the maintenance operations at the yard
Best to you all
Paolo
SM 454
|
By
PAOLO CUNEO
·
#52115
·
|