|
Re: A54 top loading fridge /freezer strut
Hi Teun;
Sorry about your finger. I can see how it would be dangerous to try to open the door in a rolling seaway, hold it open while you grab stuff. We just have one strut. Attached please find a
Hi Teun;
Sorry about your finger. I can see how it would be dangerous to try to open the door in a rolling seaway, hold it open while you grab stuff. We just have one strut. Attached please find a
|
By
Mohammad Shirloo
·
#52251
·
|
|
Re: A54 top loading fridge /freezer strut
Hi Aty & Mohammad,
Strange – as I was told the small door 54 didn’t have a strut when I was looking to get a strut as the frigging door/cover fell on my finger and I can assure you that HURTS
Hi Aty & Mohammad,
Strange – as I was told the small door 54 didn’t have a strut when I was looking to get a strut as the frigging door/cover fell on my finger and I can assure you that HURTS
|
By
Teun BAAS
·
#52250
·
|
|
Re: A54 top loading fridge /freezer strut
Hello
I guess we have the narrow one like Kokomo with a single strut on RHS (evaporator under worktop to the left of the opening).
It stopped working recently not long after I read about its
Hello
I guess we have the narrow one like Kokomo with a single strut on RHS (evaporator under worktop to the left of the opening).
It stopped working recently not long after I read about its
|
By
Sv Garulfo
·
#52249
·
Edited
|
|
Re: A54 top loading fridge /freezer strut
Hi Teun;
We have the small door for our top loading fridge in the galley and ours does have the struts. Ours also is getting weak and need replacing. So, input on this would also be appreciated if
Hi Teun;
We have the small door for our top loading fridge in the galley and ours does have the struts. Ours also is getting weak and need replacing. So, input on this would also be appreciated if
|
By
Mohammad Shirloo
·
#52248
·
|
|
Re: Zink Anode for SPURS Line Cutter
Morning Ruedi,
Thanks for reminding me. Yup – agree.
Best Regards Teun
SV AMELIT A54 #128
In storage on the hard in COOMERA (near BRISBANE) QLD AUSTRALIA
May 18, 202010:50:47
USA
Morning Ruedi,
Thanks for reminding me. Yup – agree.
Best Regards Teun
SV AMELIT A54 #128
In storage on the hard in COOMERA (near BRISBANE) QLD AUSTRALIA
May 18, 202010:50:47
USA
|
By
Teun BAAS
·
#52247
·
|
|
Re: Self Insurance
Pat,
Agree; understand Bill ROUSE tried this over the last 2 years w/o success. But if we come up with a concept that as a group we would share part of the risk it might be different. It is now
Pat,
Agree; understand Bill ROUSE tried this over the last 2 years w/o success. But if we come up with a concept that as a group we would share part of the risk it might be different. It is now
|
By
Teun BAAS
·
#52246
·
|
|
Re: Zink Anode for SPURS Line Cutter
Hi Teun
The Onan Zink Anode is placed in the Heat Exchanger and need to be checked and replaced regularly after its is used/eaten up. I attached 2 photos for you where you can see the location of the
Hi Teun
The Onan Zink Anode is placed in the Heat Exchanger and need to be checked and replaced regularly after its is used/eaten up. I attached 2 photos for you where you can see the location of the
|
By
Rudolf Waldispuehl
·
#52245
·
|
|
Re: A54 top loading fridge /freezer strut
Hi Soraya,
Looking @ your hull number (being very close to mine) I have been told that if you have the small top loading fridge/freezer there are no struts and you have to hold it open
Hi Soraya,
Looking @ your hull number (being very close to mine) I have been told that if you have the small top loading fridge/freezer there are no struts and you have to hold it open
|
By
Teun BAAS
·
#52244
·
|
|
A54 sparcraft pole bell
Hello,
Could anyone please confirm the details of the spacecraft pole bell on the AMEL 54?
Thanks
Best
Soraya
Garulfo A54-122
French Polynesia
Hello,
Could anyone please confirm the details of the spacecraft pole bell on the AMEL 54?
Thanks
Best
Soraya
Garulfo A54-122
French Polynesia
|
By
Sv Garulfo
·
#52243
·
|
|
Re: Self Insurance
Teun, I have often thought if we as sizable sub group of Amel owners approached an Insurance Co. with a group buy ,if it would be possible to obtain better coverage at a better price. The same way
Teun, I have often thought if we as sizable sub group of Amel owners approached an Insurance Co. with a group buy ,if it would be possible to obtain better coverage at a better price. The same way
|
By
Patrick McAneny
·
#52242
·
|
|
A54 top loading fridge /freezer strut
Hello
Could anyone please confirm the details for the strut of the top loading fridge/freezer of the AMEL 54? And suggest a provider/ website?
Thanks for your help
Best
Soraya
Garulfo
Hello
Could anyone please confirm the details for the strut of the top loading fridge/freezer of the AMEL 54? And suggest a provider/ website?
Thanks for your help
Best
Soraya
Garulfo
|
By
Sv Garulfo
·
#52241
·
|
|
Re: Hot Water Heater Power Consumption
Hier follow this link
You can find a boiler
230v /24 v
From 20-60 l
https://www.esomatic.de/elgena-nautic-therm.html
Von meinem iPhone gesendet
Hier follow this link
You can find a boiler
230v /24 v
From 20-60 l
https://www.esomatic.de/elgena-nautic-therm.html
Von meinem iPhone gesendet
|
By
Elja Röllinghoff Balu SM 222
·
#52240
·
|
|
Re: Self Insurance
Hi Pat & Kent,
Since we might be able to make the point of: A) AMEL boats; B) AMEL owners - and therefore a lower risk (????) - combined with thoughts/approach similar to your concept below it
Hi Pat & Kent,
Since we might be able to make the point of: A) AMEL boats; B) AMEL owners - and therefore a lower risk (????) - combined with thoughts/approach similar to your concept below it
|
By
Teun BAAS
·
#52239
·
|
|
Re: Zink Anode for SPURS Line Cutter
Hi Alexander,
I am aware of all the anodes you mention but, maybe a dumb question, where is the anode on the ONAN Generator?
Best Regards Teun
SV AMELIT A54 #128
In storage on the hard
Hi Alexander,
I am aware of all the anodes you mention but, maybe a dumb question, where is the anode on the ONAN Generator?
Best Regards Teun
SV AMELIT A54 #128
In storage on the hard
|
By
Teun BAAS
·
#52238
·
|
|
Re: Near constant hot water without a generator - Here is how i did it.
There's nothing special about "AC" vs "DC" for these heater elements, but the voltage does matter, and in common boating usage these current types imply a voltage as well. The element is just a
There's nothing special about "AC" vs "DC" for these heater elements, but the voltage does matter, and in common boating usage these current types imply a voltage as well. The element is just a
|
By
Ryan Meador
·
#52237
·
|
|
Re: My Plotter has stopped providing CTS information
Bob,
A few things to check:
My 55 has a heading sensor in the forward cabin bilge storage. That is the first thing I would check. At delivery, Kevin made a point of warning us to keep any
Bob,
A few things to check:
My 55 has a heading sensor in the forward cabin bilge storage. That is the first thing I would check. At delivery, Kevin made a point of warning us to keep any
|
By
John Clanton <jclanton@...>
·
#52236
·
|
|
Self Insurance
This is a rough outline of a self insurance or shared risk co-op, that I sent Kent and thought I would share with the group. It was prompted by the hassle I have had with obtaining insurance, the
This is a rough outline of a self insurance or shared risk co-op, that I sent Kent and thought I would share with the group. It was prompted by the hassle I have had with obtaining insurance, the
|
By
Patrick McAneny
·
#52235
·
|
|
Re: My Plotter has stopped providing CTS information
Bob, is it possible that the heading sensor is disconnected or not working?
Bill
Bob, is it possible that the heading sensor is disconnected or not working?
Bill
|
By
CW Bill Rouse
·
#52234
·
|
|
Re: anchor wash safety note
in my experience the problem arises when AWP is not used frequently enough. it gets clogged with sea debris and requires the full refurbishing some time. the good thing is it't bronze and can be
in my experience the problem arises when AWP is not used frequently enough. it gets clogged with sea debris and requires the full refurbishing some time. the good thing is it't bronze and can be
|
By
greg greg
·
#52233
·
|
|
Re: Near constant hot water without a generator - Here is how i did it.
Our water heater is an Isotherm.
I haven’t looked at the element nut size.
~~~⛵️~~~Matt
Our water heater is an Isotherm.
I haven’t looked at the element nut size.
~~~⛵️~~~Matt
|
By
Matt Salatino
·
#52232
·
|