|
Re: Volvo parts
Hi Alex,
I would be interested in that. We do intend to be back probably in November.
Cheers,
Paul
S/Y Ya Fohi - Amel 54 #98 - Grenada
Hi Alex,
I would be interested in that. We do intend to be back probably in November.
Cheers,
Paul
S/Y Ya Fohi - Amel 54 #98 - Grenada
|
By
Paul Dowd and Sharon Brown
·
#52697
·
|
|
Re: Microwave oven on Amel 54
Thanks Randall, But no I don’t know anyone in Gib. I am sure I can find something on Amazon.
Kind regards
Nick
Amelia AML54-019 Kilada Greece.
Thanks Randall, But no I don’t know anyone in Gib. I am sure I can find something on Amazon.
Kind regards
Nick
Amelia AML54-019 Kilada Greece.
|
By
ngtnewington Newington
·
#52696
·
|
|
Re: FW: Replacement HP hoses for Dessalator - UPDATE
Should be OK if 3/8” is indeed the fitting size you need. A 3/8” fitting is larger than 3/8”. You can google NPT fitting dimensions. On previous boat, only one fitting swiveled. Both swiveling
Should be OK if 3/8” is indeed the fitting size you need. A 3/8” fitting is larger than 3/8”. You can google NPT fitting dimensions. On previous boat, only one fitting swiveled. Both swiveling
|
By
Matt Salatino
·
#52695
·
|
|
Re: replacing mirrors in bathroom
Dear Alex
I replaced all the 5 mirrors on my A54 two years ago.
It was a big challenge to remove the glued mirror from the bathroom at the back. I did it with a string between the mirrors and the wood
Dear Alex
I replaced all the 5 mirrors on my A54 two years ago.
It was a big challenge to remove the glued mirror from the bathroom at the back. I did it with a string between the mirrors and the wood
|
By
Lior Keydar
·
#52694
·
|
|
Re: FW: Replacement HP hoses for Dessalator - UPDATE
On Kristy, 3ft would be enough, 4 would be better.
On Kristy, 3ft would be enough, 4 would be better.
|
By
karkauai
·
#52693
·
|
|
Re: FW: Replacement HP hoses for Dessalator - UPDATE
Thanks Bill and Kent!
Bill, I justput in 3’ so I could get a rough cost. I haven’t actually measured it yet. You’revery observant.
With bestregards,
Mark
Skipper
Sailing
Thanks Bill and Kent!
Bill, I justput in 3’ so I could get a rough cost. I haven’t actually measured it yet. You’revery observant.
With bestregards,
Mark
Skipper
Sailing
|
By
Mark Erdos
·
#52692
·
|
|
Re: air conditioning maramu
Hey Guys!
I bought Eric Lindholms Maramu back in 2012. Since then i’ve upgraded the HVAC to a new 2018 Marine Air EnviroComfort Air Conditioning with Reverse Cycle Heat Retrofit Kit from
Hey Guys!
I bought Eric Lindholms Maramu back in 2012. Since then i’ve upgraded the HVAC to a new 2018 Marine Air EnviroComfort Air Conditioning with Reverse Cycle Heat Retrofit Kit from
|
By
mr_hermanns
·
#52691
·
|
|
Re: FW: Replacement HP hoses for Dessalator - UPDATE
Hi Mark,
That sounds right, but am not certain of the thread size, I would encourage you to insist on 316 stainless.
Kent
SM243
Kristy
Hi Mark,
That sounds right, but am not certain of the thread size, I would encourage you to insist on 316 stainless.
Kent
SM243
Kristy
|
By
karkauai
·
#52690
·
|
|
Re: FW: Replacement HP hoses for Dessalator - UPDATE
I do not know about the length. A SM with a D160 with membranes in the ceiling needs about 6' for each. Remember one hose is connected at the back of the control panel.
The rest looks good to me, just
I do not know about the length. A SM with a D160 with membranes in the ceiling needs about 6' for each. Remember one hose is connected at the back of the control panel.
The rest looks good to me, just
|
By
CW Bill Rouse
·
#52689
·
|
|
Re: wiring schematic
The 54 has the socket, the SM does not have the socket unless the option was purchased.
The 54 has the socket, the SM does not have the socket unless the option was purchased.
|
By
CW Bill Rouse
·
#52688
·
|
|
Re: Replacement HP hoses for Dessalator
Mark,
Here are a few PEARS from my book:
CW Bill Rouse
Mark,
Here are a few PEARS from my book:
CW Bill Rouse
|
By
CW Bill Rouse
·
#52687
·
|
|
FW: Replacement HP hoses for Dessalator - UPDATE
I am wondering if someone who hasordered or understands HP hoses for the water maker would be kind enough totake a quick peek at this (before I push the buy button) and make sure this iscorrect:
I am wondering if someone who hasordered or understands HP hoses for the water maker would be kind enough totake a quick peek at this (before I push the buy button) and make sure this iscorrect:
|
By
Mark Erdos
·
#52686
·
|
|
Re: wiring schematic
Hi Ulrich & Randall,
Our Amel does not have the dive compressor. However the 230 Volt plus is still installed in the port lazarette. It's one of those blue, big ones like for shore power plugs.
I'm a
Hi Ulrich & Randall,
Our Amel does not have the dive compressor. However the 230 Volt plus is still installed in the port lazarette. It's one of those blue, big ones like for shore power plugs.
I'm a
|
By
Arno Luijten
·
#52685
·
|
|
Re: Microwave oven on Amel 54
Nick,
It's a long shot, but if you know somebody in Gibraltar, I would give it to you. As I have a new microwave and have no use for the rack I have.
Hope you know someone here. Let me
Nick,
It's a long shot, but if you know somebody in Gibraltar, I would give it to you. As I have a new microwave and have no use for the rack I have.
Hope you know someone here. Let me
|
By
Randall Walker
·
#52684
·
|
|
Re: Replacement HP hoses for Dessalator
Thanks Matt. That make perfectsense.
With best regards,
Mark
Skipper
Sailing Vessel - Cream Puff - SM2K - #275
Currently cruising - Tahiti, French Polynesia
www.creampuff.us
Thanks Matt. That make perfectsense.
With best regards,
Mark
Skipper
Sailing Vessel - Cream Puff - SM2K - #275
Currently cruising - Tahiti, French Polynesia
www.creampuff.us
|
By
Mark Erdos
·
#52683
·
|
|
Re: Replacement HP hoses for Dessalator
“food grade” is a misnomer here. The high pressure hoses are always carrying seawater, only filtered through a sediment filter. It’s not drinkable water. The product water comes from the other
“food grade” is a misnomer here. The high pressure hoses are always carrying seawater, only filtered through a sediment filter. It’s not drinkable water. The product water comes from the other
|
By
Matt Salatino
·
#52682
·
|
|
Replacement HP hoses for Dessalator
A call out to USA owners,
I have a box of supplies being assembled in the USA forshipment to Tahiti. I would like to include replacement HP hoses for the Amelinstalled D60 Dessalator. I am unsure
A call out to USA owners,
I have a box of supplies being assembled in the USA forshipment to Tahiti. I would like to include replacement HP hoses for the Amelinstalled D60 Dessalator. I am unsure
|
By
Mark Erdos
·
#52681
·
|
|
Re: Volvo parts
Paul,
I changed my engine to Beta Marine and I still have tons of Volvo parts that I could give you for a good price. Will you be back in Grenada this season?
Fair winds, Alex
Paul,
I changed my engine to Beta Marine and I still have tons of Volvo parts that I could give you for a good price. Will you be back in Grenada this season?
Fair winds, Alex
|
By
Alexander Ramseyer
·
#52680
·
|
|
Re: Microwave grill rack for Amel 54
Fantastic Barry and Penny. Just what I need to know…
Nick
Amelia AML 54-019 Kilada Greece
Connor via groups.io <connor_barry@...> wrote:
Fantastic Barry and Penny. Just what I need to know…
Nick
Amelia AML 54-019 Kilada Greece
Connor via groups.io <connor_barry@...> wrote:
|
By
ngtnewington Newington
·
#52679
·
|
|
Microwave grill rack for Amel 54
Hi Nick,
See below photos of the grill rack. Hope you can source a replacement.
Best
Barry and Penny
“SV Lady Penelope II”
Amel 54. #17
Sainte Anne anchorage Martinique
Hi Nick,
See below photos of the grill rack. Hope you can source a replacement.
Best
Barry and Penny
“SV Lady Penelope II”
Amel 54. #17
Sainte Anne anchorage Martinique
|
By
Barry Connor
·
#52678
·
|