The negative attachment is on the big stud to the left. The Positive for the meter is the stud on the valeo with the orange and blue wire (start and stop) note there is a small black wire sneaking

Hi Mark, The Valeo solenoid works to both start and stop the engine. It is isolated by a pair of diodes. One is fed by the start key and the other is fed DC from the stop button Without the Motorola

Ralf You are welcome. I am at place A14 in the Marina Kalamata. -- Gerhard Mueller Amel Sharki #60 Currently Kalamata, Greece

Tom, In addition tothe great advice from Eric, be sure to take a look at the stop solenoid. Thisis often overlooked when dealing with a start issue. With bestregards, Mark

To, Before you start chasing zebras, try these simple tests. Does the engine start id you depress the valeo solenoid and someone tries to start the engine? If you are able to start the engine then

Oops. Should have mentioned that. 4JH3-HTE. 100 HP yanmar

Jamie, Great news, it seems to be operating as designed. The 24V indicator led is lit up by the 24V power supply from the compressors. This shows that the system is operating from a 24V supply. It

Tom, What engine isthis on? I am unfamiliar with a button on the solenoid. With bestregards, Mark Skipper Sailing Vessel- Cream Puff - SM2K - #275 Currentlycruising - Tahiti,

So, engine doesn't start intermittently. After corrosion x in the solenoid, cleaning contacts, problem re-emerges. Can start engine by pushing button but need to fix this. Broke out spares purchased

Hi Gerhard, many thanks for the information with the primer on the defekt areas. My first idea was a complete removal from the old painting to the glass fiber. But so, I think, it´s a good

I have just installed a new chartplotter with prexisting NMEA 2000/ Seatalkng components and spent significant time sorting out a problem with as it turned out a simple solution. The solution to

I like the swimming noodle concept. Thanks for the feedback. What I have is not what I thought it was. Jamie

Hi Scott, Below attached is the Costco "Wet and Forget mold/algea cleaner" I actually bought the 5lt concentrate. Much safer to use than any bleach. Very Best Barry

Reminder: ZOOM Meeting, Presentation from the owner of QSails on sailcloth and sail construction When: Saturday, 11 July 2020, 20:00 to 21:00, (GMT+00:00) UTC An RSVP is requested. Click here

Hi Scott, Just checked and my environment friendly mold/algae remover has run out. Purchased at Costco UK 5lt concentrate lasts a long time and can use it on any type of mold/algae, really cleans

I have this for our A54. I don't get bothered by the noise, but the admiral is more sensitive to sounds. Works reasonably well, but you're right, it gets nasty. Do you just clean it with a brush and

If money were no object, I'd get an A60. Just kidding - after spending so much time and money making our A54 into exactly what we want and need, I wouldn't change her for anything. I enjoy the

Or, you can accomplish the same result using a couple ofswimming noodles with a line through them and tied under the stern of the boat. With bestregards, Mark Skipper Sailing Vessel-

We owned a 53 (2000 version) for 12 years. With her we spent 4 years going around the med, one year in the red sea (primarily for diving) and cross the pond to spend 3 years in the Caribbeans where we

Hi Jamie, We have used this over the past 5 years. We were for 2 years in Port Corbieres, Marseille and then wintered 3 years in Marina de Ragusa, Sicily. The Slap Silencer has 4 simple cords for