Porter, According to Frigoboat, the pump selected should move at least 6 liters/min. A 24-volt pump rated at 12 liters/min. running half speed on 12 volts will pump about 6 liters/min. I am not the

Along the same lines, I had a sink faucet fail last year, and had no way to shut water off to one faucet. On my list is to put a shutoff valve on every faucet. I didn't know there was a shutoff

Hi Scott, Yes, it does seem a bit counter-intuitive that warmish water is more efficient than cold water. Here is a paraphrase from my system's technical manual that may help in understanding it. The

Hi Mohammed, Thank you for the info, Unfortunately I will not be going to the US for some time. My thoughts are that we are going to be here for some time. I really like the hardtop on Caduceus, I

Hi Barry; Caduceus’ hard top was made in Norfolk West Virginia. What did you think of the Emek installation? Do you know if it was insulated and how it has performed so far? Happy

Hi Scott, Thank you for the photo. I am going to see them on Wednesday when everything reopens here after this holiday weekend. I do hope that your price is not correct. My current Bimini is an all

I wonder if they would do a volume discount? Bill is this an Amel School possibility? Cheers Courtney svTrippin 54 #101 Brunswick

This one was done by Manu at Alize Composites in Le Marin. I think he said 25-30k euros. -- Scott 2007 A54 #69 SV Tengah http://www.svtengah.com

HI Craig, I'm a little surprised that you're stating that our water cooled Danfoss refrigeration systems perform optimally with water temps above that which we experience in the tropics. That begs the

Thank you Bill, I found the valve behind the cleaning stuff. I did not expect it on this side,but must admid that I failed to consult the manual. Anyway, the problem is solved (also with the water

The nicest one I’ve seen is on the Amel 54 Soleil Bleu. It looks like it could have come out of La Rochelle. https://www.youtube.com/watch?v=DT7x0SjM648 Brent On Jul 11, 2020, 11:11 AM -0400,

Thanks Barry; I got permission from the previous owner of Caduceus A54 #56 to share the pictures of his hardtop. The following is the link to the pictures.

Hi Mohammad, 2 more photos of the raised boom line. My goal was to get it as high as possible, my Bimini bows are not bent much in the middle. Best Barry😀⛵️

Thanks, Billy - that was my guess and I see the 55 has that wide acrylic instrument pod. I should think you'll do fine with the oscillating blade. Good luck with it. Hope you didn't get too much

Later model SM2ks had the following (photo from the Users Manual):

Coder, Amel 55#56. Located in Liberty Landing, Jersey City, NJ, USA

Hi Elja, Thank you for your fast reaction. I looked, but there is nothing under the gasoven or under the adjecent floor board. May be the Amel yard changed the piping infrastructure on later

Barry, Thanks. As far as I can see the main thing was to move the pulley block, but I’m not on the boat now so can’t really compare. Cheers, Paul S/Y Ya Fohi - Amel 54 #98 - Grenada

He Wilhelm , i think you find the valve for the wasching maschien under the last under the last floor board in the kitchen under the gasoven Best Elja SM Balu 222 On the way to Levkas Von meinem

Hello dear Amelians, Finaly on board again of my SM in Greece, I want to start sailing today, but there appeared a small problem. The inlet valve of the washing machine will not close for 100%. So