I wonder if they would do a volume discount? Bill is this an Amel School possibility? Cheers Courtney svTrippin 54 #101 Brunswick

This one was done by Manu at Alize Composites in Le Marin. I think he said 25-30k euros. -- Scott 2007 A54 #69 SV Tengah http://www.svtengah.com

HI Craig, I'm a little surprised that you're stating that our water cooled Danfoss refrigeration systems perform optimally with water temps above that which we experience in the tropics. That begs the

Thank you Bill, I found the valve behind the cleaning stuff. I did not expect it on this side,but must admid that I failed to consult the manual. Anyway, the problem is solved (also with the water

The nicest one I’ve seen is on the Amel 54 Soleil Bleu. It looks like it could have come out of La Rochelle. https://www.youtube.com/watch?v=DT7x0SjM648 Brent-- Brent Cameron Future Amel Owner &

Thanks Barry; I got permission from the previous owner of Caduceus A54 #56 to share the pictures of his hardtop. The following is the link to the pictures.

Hi Mohammad, 2 more photos of the raised boom line. My goal was to get it as high as possible, my Bimini bows are not bent much in the middle. Best Barry😀⛵️

Thanks, Billy - that was my guess and I see the 55 has that wide acrylic instrument pod. I should think you'll do fine with the oscillating blade. Good luck with it. Hope you didn't get too much

Later model SM2ks had the following (photo from the Users Manual):

Coder, Amel 55#56. Located in Liberty Landing, Jersey City, NJ, USA

Hi Elja, Thank you for your fast reaction. I looked, but there is nothing under the gasoven or under the adjecent floor board. May be the Amel yard changed the piping infrastructure on later

Barry, Thanks. As far as I can see the main thing was to move the pulley block, but I’m not on the boat now so can’t really compare. Cheers, Paul S/Y Ya Fohi - Amel 54 #98 - Grenada

He Wilhelm , i think you find the valve for the wasching maschien under the last under the last floor board in the kitchen under the gasoven Best Elja SM Balu 222 On the way to Levkas Von meinem

Hello dear Amelians, Finaly on board again of my SM in Greece, I want to start sailing today, but there appeared a small problem. The inlet valve of the washing machine will not close for 100%. So

While cold seawater is, indeed, much better at cooling than warm water, it is less efficient for our refrigeration systems. Having the cooling water be at about the condensing temperature of the

Ian, On our SN (#68) the bow thruster and Foc furler are hard wired with no fuse or circuit breaker (diruptor). Real men don't need them ;-) The 100amp fuse (mine is Blue Seas pop-up breaker style) is

Years ago when I used to cave dive. we used an aircraft government surplus 3000 psi compressor. it was about 10 inches in diameter and about 14 inches high. They used to cost about $300- I still see

Thanks Barry; We ended up scrapping our season in the Med. They wouldn’t let us in anyway, since we are doing so great in the US. The new strategy is, stop looking and the problem will go away.

Hi Mohammad, Hope you and Aty are doing OK. Not being able to sail freely is a big down for our system. Today I found the local company here in Le Marin, Martinique who have made a hardtop for a 54.

Hi Barry; We have been looking at adding the hardtop for a while and plan on doing it in 2022 due delays caused by COVID-19. Since it appears you have added solar to your cockpit top, which is