Thanks James Thats great to know The rib looks like a real beauty agreed re visabiliy issues that a foredeck mounting would create - even with the inflatable stowed inverted fwd of the mast the vis

Thank you so much Bill!!! Coming from you, it means a lot!! Alexandre

Alex, You are still one of the best Super Maramu Owners contributing way more than you take, even after NIKIMAT lost her battle with the concrete docks and a Cat 5 Hurricane. Bill

Gesendet: Mittwoch, 15. Juli 2020 um 21:23 Uhr Von: "Bernd W. Rost" <bernd.w.rost@...> An: main@AmelYachtOwners.groups.io Betreff: Re: [AmelYachtOwners] Vintage Maramu dinghy stowage Gesendet:

Gesendet: Mittwoch, 15. Juli 2020 um 21:22 Uhr Von: "James Alton via groups.io" <lokiyawl2@...> An: main@AmelYachtOwners.groups.io Betreff: Re: [AmelYachtOwners] Vintage Maramu dinghy stowage Miles,

Miles, We found a Ribeye 2.6 aluminum RIB that fits beautifully on the aft cabin top between the back of the mizzen mast and the mizzen traveller. The mizzen vang however does need to be detached

Hi there I’d be really interested to hear of others Maramu dinghy choice wrt stowage The transom of the Maramu is quite a bit narrower than the SM and later models - as such davits don’t feel

Billy, Try writing toClimma in Italy. They have an excellent customer service department and willhelp you troubleshoot the unit. info@... With bestregards, Mark Skipper Sailing

Yes Heinz. We’re using Sevenstar yacht transport. So far so good. Best of luck. Porter A54-152 Excuse the errors. Sent from my IPhone Www.fouribis.net

Thanks Craig, We are guests at the City Island Yacht Club but enjoyed visiting the Harlem Yacht Club restaurant when we were here last year. It is a great club. If they open up for outdoor dining

BTW, to those who may want to help Billie, but have earlier models: Amel 55 #56 has the Climma Chiller System, which is probably unlike the very early 55's and all Amel's before Amel started using the

Hallo Porter Are you still in New Zealand? Wehre are you shipping to? Can you contact me heinz @quetzal.berlin. Maybe I will do the same.iff they do not open the borders. Cheers HEINZ Sm2000, 292 in

Billy, I have had the same symptoms, and think I have resolved mine. I found that the power leads going into the sealed compressor unit were just a little loose. I am not on the boat now to look

Settling in to our new (to us) Amel 55#56. Twice now, the AC compressor has shutdown, no lights, like dead. Air handlers still work, boat is on shore power (US waters, boat is Euro 220v). All systems

Stuart, I was not aware my boat had two shunts and I’m away from the boat so cannot check. But have you asked Amel (Thierry Billard - sav@...) or better yet, Stéphane at Pochon ( stephane@...)?

Thank you Bill! It’s the 160 L Stefan

Which model Dessalator water maker? The D160 is about 14 amps of 230 volt. Bill

You might want to follow this recommended process when emailing SAV. Ordering Parts from Amel.pdf

Hi Paul, No, we left at the turn of the century to go cruising. Now in FL when not cruising. Hanging here for Covid wait. Craig Just saw the HYC restaurant is not reopened, but has fantastic take

Hi together! Is there anyone who knows about the HP pump electric consumption? I can’t find nothing in the technical data sheet from Dessalator and any type label on the motor. Thank you Stefan and