Folks In case it is useful to anyone, enclosed is a manual and diagrams in English. While it is not clear exactly what Thomson model is described, I received it in response for my request for an

Dear Paul, i have seen your photos, they are very good. i was puzzeled by photo #1009 . Is this the forward bulkhead of the engine room? Ifg so what is the second opening in it on the far side of

<no_reply@y...> wrote: Eric...I have some posted on this site's photos under factory tour... Paul

Hi, does anyone have pictures of the super maramu being built? thanks eric Kimberlite

David, I have fitted an Air Marine 403 on the top of my mizzen mast. It's much lighter than the Kiss, so don't put one of those up there! I have given details on how I dampened down the vibration

Message text written by INTERNET:amelyachtowners@... Do not get the American Aeromarine as you will not only suffer from the noise but will also be very unpopular with your neighbours. I

Message text written by INTERNET:amelyachtowners@... I think you have made the right decisions. The davits are good ,subjct to the points I made and they have one great virtue,they are not

Thanks Dennis, Will take a look. David Ireland)" <dennis.woods@w...> wrote: serious users are very (1995). can

Thanks, David You socket. washer an boat thing price? better project

Thank you for you advise. I will definatly use a power converter for the SSB. I think I will buy the davits from France. I have looked for quite a while and the system made in La Rochelle seems to

Hi David Most marinas on the east coast have 50 amp service wich is 220V. You need to rewire your current socket for one that fits the 50A socket. The only issue is that US 220 is 60Hz and EU is 50

david, I have a freind who lives aboard a yacht in the carabean. the serious users all install a wind generator made by KISS based in Trinidad. They are very reliable, quiet, almost no vibration, with

I am planning too sail up the East COast of the USA next year. That and being in the Caribbean (St Martin) now I want to wire my boat to take 110V. Can anyone advise on how to do this? Presumably

Am thinking of fitting a wind generator to my Super Maramu (1995). Some of them seem very noisy though - can anyone recommend a make which is both reliable, efficient and quite? Anyone have

Hello Peter, thanks for the info on the Alphatronix DC/DC converter. You are right about the price of the Icom P66, at least in the UK. However, I should point out that the Icom when purchased from

Hi All, I launched my persional website. There is a page for the sistership of my Euros 41. You can check it out on the following link http://rotorman.hu/0hajo/sisterships.htm Best regards Geza

FOR SALE Lovely 1985 Amel Maramu 48! The boat is in turnkey condition and loaded with gear.She has just had a flag blue awlgrip paint job with gold striping and is stunning!Both masts and the deck

I have a client looking for a 1995 or newer supermaramu.He is a serious buyer,very familiar with these boats. Email Derek Jarvis at Bollman Yachts(derek@...) or phone

<hollamby@c...> wrote: approved !!! I The URL for Alphatronix is http://www.alfatronix.co.uk/index.htm I hope that this helps Peter

Message text written by INTERNET:amelyachtowners@... Dear Vito, The amswer is to fit an isolated 24/12 volt converter made by an English company called Alphatronix. The cost is about 150