|
Re: Power lead for SSB
Thank you for you advise. I will definatly use a power converter for
the SSB. I think I will buy the davits from France. I have looked for
quite a while and the system made in La Rochelle seems to
Thank you for you advise. I will definatly use a power converter for
the SSB. I think I will buy the davits from France. I have looked for
quite a while and the system made in La Rochelle seems to
|
By
asm283 <no_reply@...>
·
#537
·
|
|
Re: Wiring for the USA
Hi David
Most marinas on the east coast have 50 amp service wich is 220V. You
need to rewire your current socket for one that fits the 50A socket.
The only issue is that US 220 is 60Hz and EU is 50
Hi David
Most marinas on the east coast have 50 amp service wich is 220V. You
need to rewire your current socket for one that fits the 50A socket.
The only issue is that US 220 is 60Hz and EU is 50
|
By
asm283 <no_reply@...>
·
#536
·
|
|
Re: [Amel Yacht Owners] Wind Generator
david,
I have a freind who lives aboard a yacht in the carabean. the serious users
all install a wind generator made by KISS based in Trinidad. They are very
reliable, quiet, almost no vibration, with
david,
I have a freind who lives aboard a yacht in the carabean. the serious users
all install a wind generator made by KISS based in Trinidad. They are very
reliable, quiet, almost no vibration, with
|
By
Woods, Dennis (WMI, Ireland) <dennis.woods@...>
·
#535
·
|
|
Wiring for the USA
I am planning too sail up the East COast of the USA next year. That
and being in the Caribbean (St Martin) now I want to wire my boat to
take 110V.
Can anyone advise on how to do this? Presumably
I am planning too sail up the East COast of the USA next year. That
and being in the Caribbean (St Martin) now I want to wire my boat to
take 110V.
Can anyone advise on how to do this? Presumably
|
By
David Crisp
·
#534
·
|
|
Wind Generator
Am thinking of fitting a wind generator to my Super Maramu (1995).
Some of them seem very noisy though - can anyone recommend a make
which is both reliable, efficient and quite?
Anyone have
Am thinking of fitting a wind generator to my Super Maramu (1995).
Some of them seem very noisy though - can anyone recommend a make
which is both reliable, efficient and quite?
Anyone have
|
By
David Crisp
·
#533
·
|
|
Re: [Amel Yacht Owners] Power lead for SSB
Hello Peter,
thanks for the info on the Alphatronix DC/DC converter. You are right about the price of the Icom P66, at least in the UK. However, I should point out that the Icom when purchased from
Hello Peter,
thanks for the info on the Alphatronix DC/DC converter. You are right about the price of the Icom P66, at least in the UK. However, I should point out that the Icom when purchased from
|
By
Ian Shepherd <g4ljf@...>
·
#532
·
|
|
Webpage for Amel Euros
Hi All,
I launched my persional website. There is a page for
the sistership of my Euros 41.
You can check it out on the following link
http://rotorman.hu/0hajo/sisterships.htm
Best regards
Geza
Hi All,
I launched my persional website. There is a page for
the sistership of my Euros 41.
You can check it out on the following link
http://rotorman.hu/0hajo/sisterships.htm
Best regards
Geza
|
By
Szabó Géza <szabog@...>
·
#531
·
|
|
Beautiful 1985 Amel Maramu 48 for sale
FOR SALE
Lovely 1985 Amel Maramu 48!
The boat is in turnkey condition and loaded with gear.She has just had a flag blue awlgrip paint job with gold striping and is stunning!Both masts and the deck
FOR SALE
Lovely 1985 Amel Maramu 48!
The boat is in turnkey condition and loaded with gear.She has just had a flag blue awlgrip paint job with gold striping and is stunning!Both masts and the deck
|
By
Derek jarvis <sailorman522000@...>
·
#530
·
|
|
wanted to buy...Supermaramu
I have a client looking for a 1995 or newer supermaramu.He is a
serious buyer,very familiar with these boats.
Email Derek Jarvis at Bollman Yachts(derek@...) or
phone
I have a client looking for a 1995 or newer supermaramu.He is a
serious buyer,very familiar with these boats.
Email Derek Jarvis at Bollman Yachts(derek@...) or
phone
|
By
sailorman522000 <sailorman522000@yahoo.com> <sailorman522000@...>
·
#529
·
|
|
Re: [Amel Yacht Owners] Power lead for SSB
<hollamby@c...> wrote:
approved
!!! I
The URL for Alphatronix is http://www.alfatronix.co.uk/index.htm
I hope that this helps
Peter
<hollamby@c...> wrote:
approved
!!! I
The URL for Alphatronix is http://www.alfatronix.co.uk/index.htm
I hope that this helps
Peter
|
By
petervweston <no_reply@...>
·
#528
·
|
|
[Amel Yacht Owners] Power lead for SSB
Message text written by INTERNET:amelyachtowners@...
Dear Vito,
The amswer is to fit an isolated 24/12 volt converter made by an English
company called Alphatronix. The cost is about 150
Message text written by INTERNET:amelyachtowners@...
Dear Vito,
The amswer is to fit an isolated 24/12 volt converter made by an English
company called Alphatronix. The cost is about 150
|
By
Anne and John Hollamby <hollamby@...>
·
#527
·
|
|
Re: Davits Manufacturer
Vito,
I received the following from Mr. Selo at Amel:
"The davits you have seen are not available from Amel but you can get
them from the company mentioned below:"
SECTEUR
Vito,
I received the following from Mr. Selo at Amel:
"The davits you have seen are not available from Amel but you can get
them from the company mentioned below:"
SECTEUR
|
By
Zanareva
·
#526
·
|
|
Power lead for SSB
Hello
I am looking into installing an SSB radio on my SM. Because of the
need for 12 volt power and the hi amp draw on send 23A. The installer
is recomending that I wire th radio to the starting
Hello
I am looking into installing an SSB radio on my SM. Because of the
need for 12 volt power and the hi amp draw on send 23A. The installer
is recomending that I wire th radio to the starting
|
By
asm283 <no_reply@...>
·
#525
·
|
|
Davits Manufacturer
Hello
Some of you have written in this forum that there is a manufacturer
in La Rochelle that makes an exellent davits for the Super Maramu.
Does anyone konw the name and contact information. Has
Hello
Some of you have written in this forum that there is a manufacturer
in La Rochelle that makes an exellent davits for the Super Maramu.
Does anyone konw the name and contact information. Has
|
By
asm283 <no_reply@...>
·
#524
·
|
|
Re: [Amel Yacht Owners] Re: looking for a new engine
Adam,
Thank you for your info.Now I have clear up some basic questions.
Regards from Med. ( now quite cold).
Luis
"amelmango <chiefnelson@...>" <chiefnelson@...> wrote:Luis,
I
Adam,
Thank you for your info.Now I have clear up some basic questions.
Regards from Med. ( now quite cold).
Luis
"amelmango <chiefnelson@...>" <chiefnelson@...> wrote:Luis,
I
|
By
Luis Gonzalez Vallejo <l_gonzalezvallejo@...>
·
#523
·
|
|
Re: looking for a new engine
Luis,
I think the calculation for hull speed is the square root of
waterline times 1.2-1.4. The varible factor is for a lower surface,
medium displacement sailing hull form. So for a Mango: sq.
Luis,
I think the calculation for hull speed is the square root of
waterline times 1.2-1.4. The varible factor is for a lower surface,
medium displacement sailing hull form. So for a Mango: sq.
|
By
amelmango <chiefnelson@hotmail.com> <chiefnelson@...>
·
#522
·
|
|
Autopropellers
From Bali Hai, SM 319
We have had a letter from Brunton Autoprops saying that there is a
potential problem with the propeller. It appears that it is not a
danger issue but they are recalling for
From Bali Hai, SM 319
We have had a letter from Brunton Autoprops saying that there is a
potential problem with the propeller. It appears that it is not a
danger issue but they are recalling for
|
By
John and Anne on Bali Hai <hollamby@compuserve.com> <hollamby@...>
·
#521
·
|
|
Re: [Amel Yacht Owners] Re: looking for a new engine
Luis Gonzalez Vallejo <l_gonzalezvallejo@...> wrote:
Luis Gonzalez Vallejo <l_gonzalezvallejo@...> wrote:
Luis Gonzalez Vallejo <l_gonzalezvallejo@...> wrote:
Adam,
Thank you for your
Luis Gonzalez Vallejo <l_gonzalezvallejo@...> wrote:
Luis Gonzalez Vallejo <l_gonzalezvallejo@...> wrote:
Luis Gonzalez Vallejo <l_gonzalezvallejo@...> wrote:
Adam,
Thank you for your
|
By
Luis Gonzalez Vallejo <l_gonzalezvallejo@...>
·
#520
·
|
|
Re: [Amel Yacht Owners] Re: looking for a new engine
Adam,
Thank you for your advice.Do you know which is the maximum speed that this boat can reach considering only her length over water, and what do you think about the convenient maximum horse power
Adam,
Thank you for your advice.Do you know which is the maximum speed that this boat can reach considering only her length over water, and what do you think about the convenient maximum horse power
|
By
Luis Gonzalez Vallejo <l_gonzalezvallejo@...>
·
#519
·
|
|
Re: looking for a new engine
Luis,
My Mango has the Prekins 4-236 which has proved to be a great
engine for the boat. If you must have more horsepower for some
reason, Perkins turbocharges the 4-236. It would then fit on
Luis,
My Mango has the Prekins 4-236 which has proved to be a great
engine for the boat. If you must have more horsepower for some
reason, Perkins turbocharges the 4-236. It would then fit on
|
By
amelmango <chiefnelson@hotmail.com> <chiefnelson@...>
·
#518
·
|