There are a number of other things for the passerelle. Attached to my starboard backstay is a tubular rod that swings down and goes into a ring welded to the starboard side of the passarelle.

YouTube link set up for the live stream included below ZOOM Meeting with Battle Born LiFePO4 Lithium Batteries When: Saturday, 8 August 2020 20:00 to 21:00 (UTC+00:00) UTC An RSVP is requested.

Aha! Thanks that makes perfect sense. Thanks for helping me figure that out!

Vic, On ours, the wheel side goes on the dock and the boat side has a short pole that goes into one of two available corresponding holes on the stern (one on deck and one on the top step). This

Hi, Can folks please link me to any resources in terms of actually attaching the passerelle to the stern? I've found a couple of photos, but mostly in the photos it seems as though folks are just

All, The Groups.io Email System for the Amel Yacht Owners Group will be OFF for maintenance for about 2 hours. When: 7 August 2020, 0600 UTC to 7 August 2020, 0800 UTC Description: Groups.io hosting

Hi Eloi, I did the same 3 years ago in Hyeres. ACMO plus German steel cable; till now no problem at all. Stay healthy Stefano N’EVEREST Super Maramu 185 Bocca di Magra Italy

When working on our D3-110I-rev. C engine, I discovered a shattered impeller. I hate that as it means you need to open the intercooler to get the remains of the impeller out of the system. Opening up

The following files have been uploaded to the Files area of the main@AmelYachtOwners.groups.io group. /Volvo Penta/Workshop manual D3-1x0I-ABC.pdf By: Arno

ZOOM Meeting with Battle Born LiFePO4 Lithium Batteries When: Saturday, 8 August 2020 20:00 to 21:00 (UTC+00:00) UTC An RSVP is requested. Click here to RSVP Description: If you are interested in

Ryan, Perfect. Thanks CW Bill Rouse Amel

Hi Bill, I've attached the one I made when I renamed our boat. The dimensions listed are in inches. Some SMs have a grab rail to port of the steps which might eat into this space, so keep that in

Does anyone have the measurements of the stern area of a SM for boat name and port. I lost the diagram I had. Bill

I will also send you final drawing and a one foot sample of the first extrusion. Best Regards Jim Watkins Act II Maraamu hull 185 Sent from Mail for Windows 10

I would be interested for my Sharki #163 Aras -- Aras Grinius

Hi Eloi, I just changed my standing rigging at Seanergie Hyeres. And as you said, it's ACMO fittings with WDS cables. I actually didn't challenged that part. My standing rigging was from 1989, and

Hi Eloi, We had Pen Azen rerigged 4 years ago by X-Voiles in Hyeres on the recommendation of Amel. Very professional job. They took both masts off the boat. When they finished the boss and I sailed

Thanks a lot for the recommendation. If we go, we will consider the car rental idea for sure. James SV Sueño Maramu #220

Tim, I did contact Amel but while they have done an absolutely amazing job of providing many of the parts I need, they could not help me with the bearings and seals. The sizes of the seals were