|
YouTube link set up for the live stream included below ZOOM Meeting with Battle Born LiFePO4 Lithium Batteries - Sat, 08/08/2020 20:00-21:00, Please RSVP
#cal-reminder
Reminder: YouTube link set up for the live stream included below ZOOM Meeting with Battle Born LiFePO4 Lithium Batteries
When: Saturday, 8 August 2020, 20:00 to 21:00, (GMT+00:00) UTC
An RSVP
Reminder: YouTube link set up for the live stream included below ZOOM Meeting with Battle Born LiFePO4 Lithium Batteries
When: Saturday, 8 August 2020, 20:00 to 21:00, (GMT+00:00) UTC
An RSVP
|
By
main@AmelYachtOwners.groups.io Calendar <main@...>
·
#53595
·
|
|
Re: A54 Engine Transmission (ZF25)
Hi Mohammad,
You must be one of the few doing this with so much dedication! Which user manual are you referring to? It's the first time I've heard this as normally moist cannot enter the gearbox.
But
Hi Mohammad,
You must be one of the few doing this with so much dedication! Which user manual are you referring to? It's the first time I've heard this as normally moist cannot enter the gearbox.
But
|
By
Arno Luijten
·
#53594
·
|
|
Re: File /disk brake A54 slipping shaky.mov uploaded
Ralph,
No need to apologize. I was adding clarity for other owners who probably need to check this.
Bill
Ralph,
No need to apologize. I was adding clarity for other owners who probably need to check this.
Bill
|
By
CW Bill Rouse
·
#53593
·
|
|
Re: File /disk brake A54 slipping shaky.mov uploaded
There is a simple test if the bushing is ok. Just try to move the whole brakecylinder up (as in my video). If you can move it up 1or 2 cm like in my video, it look's like the bushing is worn. If you
There is a simple test if the bushing is ok. Just try to move the whole brakecylinder up (as in my video). If you can move it up 1or 2 cm like in my video, it look's like the bushing is worn. If you
|
By
Ralph Heilig
·
#53592
·
|
|
Re: File /disk brake A54 slipping shaky.mov uploaded
sorry for my english, i meant the bushing when I wrote bolt. And I meant the bolt when I wrote screw.
the bolt (screw) is perfect. Also the other caliper arm is ok. the bushing is only worn where it
sorry for my english, i meant the bushing when I wrote bolt. And I meant the bolt when I wrote screw.
the bolt (screw) is perfect. Also the other caliper arm is ok. the bushing is only worn where it
|
By
Ralph Heilig
·
#53591
·
Edited
|
|
Re: File /disk brake A54 slipping shaky.mov uploaded
The bushing is what wore out first, then the worn bushing caused the holes in the caliper to wear.
The bolt you mentioned retains the bushing in place:
I am very surprised at this bushing wear. I
The bushing is what wore out first, then the worn bushing caused the holes in the caliper to wear.
The bolt you mentioned retains the bushing in place:
I am very surprised at this bushing wear. I
|
By
CW Bill Rouse
·
#53590
·
|
|
Re: File /disk brake A54 slipping shaky.mov uploaded
Here the feedback of the source of my shaky (no more working) brake problem.
The primary source was the aluminum bolt between the holding screw and the caliper. As you can see, the bolt is worn on
Here the feedback of the source of my shaky (no more working) brake problem.
The primary source was the aluminum bolt between the holding screw and the caliper. As you can see, the bolt is worn on
|
By
Ralph Heilig
·
#53589
·
Edited
|
|
Re: Passerelle
Vic,
There are some "standard" teak steps available that have non-slip grooves on one side. You may have to trim them a bit. You can also cut grooves in a flat board with a table saw.
The steps screw
Vic,
There are some "standard" teak steps available that have non-slip grooves on one side. You may have to trim them a bit. You can also cut grooves in a flat board with a table saw.
The steps screw
|
By
Craig Briggs
·
#53588
·
Edited
|
|
Re: Passerelle
Also, have folks had the steps/platform redone on their passerelle? Mine are missing. Just curious if anyone has any advice there too.
Thanks!
- Vic
Also, have folks had the steps/platform redone on their passerelle? Mine are missing. Just curious if anyone has any advice there too.
Thanks!
- Vic
|
By
Vic Fryzel
·
#53587
·
|
|
Re: Passerelle
This is really great info. Will try all of this out! Thanks!
-Vic "Moon Dog" SM248
This is really great info. Will try all of this out! Thanks!
-Vic "Moon Dog" SM248
|
By
Vic Fryzel
·
#53586
·
|
|
Re: A54 Engine Transmission (ZF25)
Hello Arno;
We replace the transmission oil and filter every year prior to the start of the season. I believe this is stated in the manual. Also, we fill the oil to the top (About an extra 2
Hello Arno;
We replace the transmission oil and filter every year prior to the start of the season. I believe this is stated in the manual. Also, we fill the oil to the top (About an extra 2
|
By
Mohammad Shirloo
·
#53585
·
|
|
drawings for C drive and propulsion
Hello, thanks for help with my hatches.
Are there any drawings for the C drive, and propulsion, with spare parts available?
Were to buy the spare parts? Is there an Amel shop?
mit feundlichem Gruß
Hello, thanks for help with my hatches.
Are there any drawings for the C drive, and propulsion, with spare parts available?
Were to buy the spare parts? Is there an Amel shop?
mit feundlichem Gruß
|
By
Roman Lawrence
·
#53584
·
|
|
drawings for C drive and propulsion
Hello, thanks for help with my hatches.
Are there any drawings for the C drive, and propulsion, with spare parts available?
Were to buy the spare parts? Is there an Amel shop?
mit feundlichem Gruß
Hello, thanks for help with my hatches.
Are there any drawings for the C drive, and propulsion, with spare parts available?
Were to buy the spare parts? Is there an Amel shop?
mit feundlichem Gruß
|
By
Roman Lawrence
·
#53583
·
|
|
Re: A54 Engine Transmission (ZF25)
Hello Arno, thanks for answering. Amel recomend every 2 years.
I wanted to have the drawing for the propulsion, to give the engeneer in the shipyard some help
mit feundlichem Gruß / best
Hello Arno, thanks for answering. Amel recomend every 2 years.
I wanted to have the drawing for the propulsion, to give the engeneer in the shipyard some help
mit feundlichem Gruß / best
|
By
Roman Lawrence
·
#53582
·
|
|
A54 Engine Transmission (ZF25)
I just uploaded the workshop manual for the engine transmission into the "/Files / Volvo Penta" section. I don't think there is a lot we can do about this thing ourselves as it needs lots of specialty
I just uploaded the workshop manual for the engine transmission into the "/Files / Volvo Penta" section. I don't think there is a lot we can do about this thing ourselves as it needs lots of specialty
|
By
Arno Luijten
·
#53581
·
|
|
Accepted: [AmelYachtOwners] Updated Event: YouTube link set up for the live stream included below ZOOM Meeting with Battle Born LiFePO4 Lithium Batteries - Saturday, 8 August 2020
#cal-invite
By
James Watkins
·
#53580
·
|
|
Re: Passerelle
There are a number of other things for the passerelle.
Attached to my starboard backstay is a tubular rod that swings down and goes into a ring welded to the starboard side of the passarelle.
There are a number of other things for the passerelle.
Attached to my starboard backstay is a tubular rod that swings down and goes into a ring welded to the starboard side of the passarelle.
|
By
eric freedman
·
#53579
·
|
|
Updated Event: YouTube link set up for the live stream included below ZOOM Meeting with Battle Born LiFePO4 Lithium Batteries - Saturday, 8 August 2020
#cal-invite
YouTube link set up for the live stream included below ZOOM Meeting with Battle Born LiFePO4 Lithium Batteries
When:
Saturday, 8 August 2020
20:00 to 21:00
(UTC+00:00) UTC
An RSVP is requested.
YouTube link set up for the live stream included below ZOOM Meeting with Battle Born LiFePO4 Lithium Batteries
When:
Saturday, 8 August 2020
20:00 to 21:00
(UTC+00:00) UTC
An RSVP is requested.
|
By
main@AmelYachtOwners.groups.io Calendar <main@...>
·
#53578
·
|
|
Re: Passerelle
Aha! Thanks that makes perfect sense. Thanks for helping me figure that out!
Aha! Thanks that makes perfect sense. Thanks for helping me figure that out!
|
By
Vic Fryzel
·
#53577
·
|
|
Re: Passerelle
Vic,
On ours, the wheel side goes on the dock and the boat side has a short pole that goes into one of two available corresponding holes on the stern (one on deck and one on the top step). This
Vic,
On ours, the wheel side goes on the dock and the boat side has a short pole that goes into one of two available corresponding holes on the stern (one on deck and one on the top step). This
|
By
Denise McGovern
·
#53576
·
|