Hi all, Can anyone give me the dimensions of the gas cooktop on the SM 2000 as per the pic. Looking to retrofit an induction cooktop which is 574mm square and hoping it will sit on the existing s/s

Amel Yacht Owners Group August 2020 Meeting - YouTube this is the recording. Randall S/V Albedo A54#56

Hi Gang, great Zoom. But due to bandwidth problems, I missed a considerable period. Was it recorded and archived for later viewing. FWIW, Ken Powers gave a good exposé of BB batteries on his web

I concur great meeting thanks to all for sharing their thoughts and time Cheers Courtney

This was the best one yet. Really appreciated the knowledge and sharing from the presenters, Brian on Delos and the other owners. Very much worth watching on YT if you didn’t catch it. Thanks to

Whaouu ! What a massive, supportive and detailed answers I got from this question ! Thank you to all of you. I'll wait for the next long stop before removing it again and change oil for grease…

Reminder: NEW: s/v DELOS, Brian id also joining. DELOS installed these. European distributor of LiFePO4 Lithium and Victron Energy joining ZOOM Meeting with Battle Born LiFePO4 Lithium

So I tried taking the gearbox off with not much success. I figured I would post a quick video here to what I am attempting to do and maybe someone could give me some guidance if I am approaching it

Robert, yes, please. CW Bill Rouse Amel

I’m going to watch on YT, do I need to RSVP? Regards, Robert Giroux (202)262-5828 -----Original Appointment----- From: main@AmelYachtOwners.groups.io Group

NEW: s/v DELOS, Brian id also joining. DELOS installed these. European distributor of LiFePO4 Lithium and Victron Energy joining ZOOM Meeting with Battle Born LiFePO4 Lithium

Sorry - link now attached https://rover.ebay.com/rover/0/0/0?mpre=https%3A%2F%2Fwww.ebay.co.uk%2Fulk%2Fitm%2F143168888853 M

I bought a new switch and a short piece of 1/4" ID copper tubing. I crimped the tubing onto the switch, flattened the rest of the tubing, and drilled a hole through it near the end. It has held up for

Hello friends I managed to pick up a pair of new Goiot mainsheet cars when we were in Martenique last year So I have some new shiny ones that I’m rather pleased with. (Still hunting mizzen cars

Leave the string attached to the ‘stick’ and tie it to the new switch easy Cheers Courtney Trippin 54 #101

As I am working on the boat, I also want to replace the bilge switch (corrosion / got an new one from Amel). I wanted to remove the back cap on top of the stick to mount the new string, but it looks

Craig, I commend you on the succinctness of this post. If we had a summary like this for ALL topics, I’m sure it would save everyone hours of scrolling and searching! 👍

It is the same in our SM 2000 no 299 Danny

A grease nipple is not needed on this gearbox but a method of adding grease will lengthen the life of the gearbox attached to the furling motor and outhaul motor.

Thierry from Amel's support office advised me last week that the manual gearbox furler is filled with grease from the factory, not oil. He also said he was not aware of anyone having installed a