|
Switch to LiFePO4
Hi All, especially those who have switched to Lithium
I am going to take the leap when we get back to the Chesapeake in October.
I currently have:
**105A Magnun Charger/4000W inverter with remote
Hi All, especially those who have switched to Lithium
I am going to take the leap when we get back to the Chesapeake in October.
I currently have:
**105A Magnun Charger/4000W inverter with remote
|
By
karkauai
·
#53701
·
|
|
Re: File /disk brake A54 slipping shaky.mov uploaded
Ralph,
Well done. Good job.
CW Bill Rouse
Ralph,
Well done. Good job.
CW Bill Rouse
|
By
CW Bill Rouse
·
#53700
·
|
|
Re: A54 holding tank drain seasock
Thanks all for your recommendations.
Yes the 54 has the same on the caps on the deck which we used after closing the valve.
A bit of vinaigrette did the trick:
- first white vinegar to dissolve the
Thanks all for your recommendations.
Yes the 54 has the same on the caps on the deck which we used after closing the valve.
A bit of vinaigrette did the trick:
- first white vinegar to dissolve the
|
By
Sv Garulfo
·
#53699
·
|
|
Re: File /disk brake A54 slipping shaky.mov uploaded
I installed the new caliper and it fit's pretty well. Thanks to SAV AMEL.
I have written a short replacement procedure instruction. I attach it as PDF. I'm sure some more will need to replace the old
I installed the new caliper and it fit's pretty well. Thanks to SAV AMEL.
I have written a short replacement procedure instruction. I attach it as PDF. I'm sure some more will need to replace the old
|
By
Ralph Heilig
·
#53698
·
|
|
Re: Tips appreciated: Major frustration trying to pull cable through Mizzen.
After struggling with the mizzen for a while, we got it to work. On my main, we did as Oliver did and it made it super easy. To clarify further:
Inside each conduit there is a thinner line and a
After struggling with the mizzen for a while, we got it to work. On my main, we did as Oliver did and it made it super easy. To clarify further:
Inside each conduit there is a thinner line and a
|
By
Scott SV Tengah
·
#53697
·
|
|
Re: Run 2500w inverter always even on shore power?
My boat is pure 220/50hz also and I didn't want to go through the trouble of retrofitting it to work for the short periods where I am in 60hz land. I have the Victron Quattro 5kw/120a charger/inverter
My boat is pure 220/50hz also and I didn't want to go through the trouble of retrofitting it to work for the short periods where I am in 60hz land. I have the Victron Quattro 5kw/120a charger/inverter
|
By
Scott SV Tengah
·
#53696
·
|
|
Re: Onan shuts down under load without shutdown codes
And, I should have said, once you eliminate the cooling system, the fuel system, and each of the sensors, I suggest that it's time to get an Onan tech.
Good luck!
Best,
CW Bill Rouse
Amel Owners
And, I should have said, once you eliminate the cooling system, the fuel system, and each of the sensors, I suggest that it's time to get an Onan tech.
Good luck!
Best,
CW Bill Rouse
Amel Owners
|
By
CW Bill Rouse
·
#53695
·
|
|
Re: Onan shuts down under load without shutdown codes
Mark,
I know that you probably know this, but "plenty of water coming out the exhaust" is not a measure of sufficient water, or of the colling system. The only measure of the cooling system is the
Mark,
I know that you probably know this, but "plenty of water coming out the exhaust" is not a measure of sufficient water, or of the colling system. The only measure of the cooling system is the
|
By
CW Bill Rouse
·
#53694
·
|
|
Onan shuts down under load without shutdown codes
On my first sail trip of the season, my Onan MDKAV shuts down under load after 15 to 20 minutes. No blinking codes. Does not matter is the load is from the watermaker or AC. It does not shut down
On my first sail trip of the season, my Onan MDKAV shuts down under load after 15 to 20 minutes. No blinking codes. Does not matter is the load is from the watermaker or AC. It does not shut down
|
By
Mark Pitt
·
#53693
·
|
|
Re: Run 2500w inverter always even on shore power?
Except of leaving another hole of $2000+ in your wallet :-)
Arno
Except of leaving another hole of $2000+ in your wallet :-)
Arno
|
By
Arno Luijten
·
#53692
·
|
|
Re: Recommendation for Bonfiglioli gearbox rebuild in New Zealand
Hello Mike,
Not sure if Total Marine can complete your request but they made new gears for my BT. Walk over and ask Cam if he can cut new gears...
However, these Bonfiglioli are not expensive and,
Hello Mike,
Not sure if Total Marine can complete your request but they made new gears for my BT. Walk over and ask Cam if he can cut new gears...
However, these Bonfiglioli are not expensive and,
|
By
Germain Jean-Pierre
·
#53691
·
|
|
Re: Recommendation for Bonfiglioli gearbox rebuild in New Zealand
Y es Mike I’ve used the bonfiglioli agent in Auckland found the excellent
New gearboxes were not very expensive so brought new
If you need to overhaul the worm drive in your headsail furler
Y es Mike I’ve used the bonfiglioli agent in Auckland found the excellent
New gearboxes were not very expensive so brought new
If you need to overhaul the worm drive in your headsail furler
|
By
JOHN HAYES
·
#53690
·
|
|
Recommendation for Bonfiglioli gearbox rebuild in New Zealand
Hello everyone,
Can any owners recommend a good place to get the Bonfiglioli gearboxes rebuilt in New Zealand? Has anyone used the Bonfiglioli Transmission place in Auckland?
I would like to have them
Hello everyone,
Can any owners recommend a good place to get the Bonfiglioli gearboxes rebuilt in New Zealand? Has anyone used the Bonfiglioli Transmission place in Auckland?
I would like to have them
|
By
Mike Longcor (SV Trilogy)
·
#53689
·
|
|
Re: Run 2500w inverter always even on shore power?
Hello guys,
All these problems are over when you use a Victron Multi 120 5000.
Since we installed that device its 24h on and all appliences work.
Its like shorepower on anchor.
Oliver from Vela
Hello guys,
All these problems are over when you use a Victron Multi 120 5000.
Since we installed that device its 24h on and all appliences work.
Its like shorepower on anchor.
Oliver from Vela
|
By
Oliver Henrichsen, SV Vela Nautica
·
#53688
·
|
|
Re: Run 2500w inverter always even on shore power?
Because I use a CPAP and wanted to be able to run it off the house bank through the AC outlets, I installed an 1800 watt inverter and wired it to a switch in the compartment above the sink. The
Because I use a CPAP and wanted to be able to run it off the house bank through the AC outlets, I installed an 1800 watt inverter and wired it to a switch in the compartment above the sink. The
|
By
Duane Siegfri
·
#53687
·
|
|
Re: Super Maramu Hull #440 New Owners Introduction
Hello Rafael & Taty, is your SM in Rosas/Empuriabrava?
JB
Hello Rafael & Taty, is your SM in Rosas/Empuriabrava?
JB
|
By
JB Duler
·
#53686
·
|
|
Re: tb/AMEL owner or AMEL familiar professional near COOMERA QLND AUSTRALIA/AYOG
In addition to below Email I am just reading that AUSTRALIA NORTHERN TERRETORIES have closed their border for INTERNAL traffic until 2022 that is 20twentyTWO.
Sounds drastic to me but I had the same
In addition to below Email I am just reading that AUSTRALIA NORTHERN TERRETORIES have closed their border for INTERNAL traffic until 2022 that is 20twentyTWO.
Sounds drastic to me but I had the same
|
By
Teun BAAS
·
#53685
·
|
|
Re: Run 2500w inverter always even on shore power?
I didn't have the inverter on, RTFM. The manual specifies the priority system. The gen overrides the inverter, but the inverter overrides shore power. So, if my 2500w inverter is on then it's
I didn't have the inverter on, RTFM. The manual specifies the priority system. The gen overrides the inverter, but the inverter overrides shore power. So, if my 2500w inverter is on then it's
|
By
Billy Newport
·
#53684
·
|
|
Re: new Rigg on SM2000
I’ve also been told that the best wire comes from Korea.
~~~⛵️~~~Matt
I’ve also been told that the best wire comes from Korea.
~~~⛵️~~~Matt
|
By
Matt Salatino
·
#53683
·
|
|
Re: new Rigg on SM2000
Hello,
I thought almost all SS câbles came from KOS of Korea and has good reputation with riggers.
What is the brand of the German cables ?
Fair winds
Denis
Ex Meltem 32
Envoyé de mon iPhone
Hello,
I thought almost all SS câbles came from KOS of Korea and has good reputation with riggers.
What is the brand of the German cables ?
Fair winds
Denis
Ex Meltem 32
Envoyé de mon iPhone
|
By
Denis Foster
·
#53682
·
|