Scott, A few things about this. The base of the antenna may be connected to the negative of the power-supply of the WiFi extender. If that is the case, isolate it from the mast. Second putting your

Pat, This sounds like an interesting option to me and apparently there was no damage done to your gel coat. I like the fact that you avoided using harsh chemicals. You also checked your boats

Scott, I hope you guys are safe and healthy. Since I am a simple person who enjoys simple explanations, let me jump in with what I think will help you. The Amel Bonding Checking System on your Amel

A few weeks ago I mentioned that I intended to have by boat sandblasted , I paid for it ,but they did something different,maybe better. I went to see what progress had been made on repairs . The

Hi all, This is really a question about bonding, which I'm very weak on. We have been using a Wirie Pro wifi extender on our A54 for over 2 years and while the Wirie didn't work that great, I

Thanks but I think you are looking for this video…. The other one was a narrowboat guy who seemed happy with his setup. https://www.youtube.com/watch?v=jgoIocPgOug Brent-- Brent Cameron Future

A second vote for Mike Previti. He surveyed two of my previous boats, and when I spoke to him about my upcoming purchase of my Amel 54, he was very knowledgeable about them, and was able to describe

Je all , In the link you find a you Tube Video from victron , it explaniert what Happens Wien you London li battreis with a small ore wrang altinator Berry intresting

Hi, For the first time, I'm looking at replacing a lot of or ~all of the hoses/valves that deliver fresh or raw water in the engine room. Some of mine have become extremely rusted or are a bit split.

Michael Previti. He surveyed my Sharki for Insurance purposes. He is down in Solomons. Mike Previti President; PMC, Inc. 410 610 8761 Aras SV FIASCO Sharki #163 1988 -- Aras Grinius

Can anyone recommend a good Marine Surveyor for an Amel in Annapolis MD area? KS

I disassembled pump, clean it and put it back as it was. Starts working, but after 30-40 seconds the fuse goes off. I can reset and it starts again and after 30 seconds the fuse gores off. No water

Whatever. It may be a 30 sec. capacity. It’s like audio amplifiers with their heavily inflated power rating. The thing is 2kW continuously, the only number you can count on. Bad

Peak is actually 5kw. See here: https://www.mastervolt.com/products/mass-sine-24v/mass-sine-24-2500-230v-50hz/ 2.5kw is their P30 number, I don't know what P30 means, 30 second pulse? 5kw might be

Well, as I stated earlier, your Mastervolt is actually only 2kW. The 2.5 kW is peak load... Cheers, Arno Luijten, SV Luna, A54-121

I added a Shelly EM AC monitor to my MV 2500 inverter today so I did a wash/dry cycle on my LG Direct 7 machine and here is the data. So, max draw of around 1.8kw, the motor itself uses < 300W, the

He Brant so I see many problems I can't control as an electrolaie ( inexperienced) I don't know that plug and play Elja Von meinem iPhone gesendet

All of those leads are tied together at a common post so it’s putting each pair in parallel and unless the offending battery completely disconnects (i.e. breaks the circuit), the second battery can

He all On the SM and I assume on the 54/55 each pair of batteries 2x12 V / 24 V is supplied by a seperate plus and minus . ? so every package has one extra line to load . therefore, for solution 24v

I asked that exact question of the BB guys and they assured us that the second battery would refuse any charge as a result of being wired in series (I gather because the first one is taken completely