|
Re: Cook top dimensions
Paolo
Since I don't have 220 Volt on board I can use the cooker only in the harbor.
--
Gerhard Mueller
Amel Sharki #60
Currently Kalamata, Greece
Paolo
Since I don't have 220 Volt on board I can use the cooker only in the harbor.
--
Gerhard Mueller
Amel Sharki #60
Currently Kalamata, Greece
|
By
Gerhard Mueller
·
#53828
·
|
|
Re: Cook top dimensions
Hi Paolo,
Thanks and apologies for the slow reply. The cooktop I am looking at is the Miele KM 7200 FR with dimensions of 574mm W, 504mm D and 48mm H.
Looks like this should fit well. Not cheap but
Hi Paolo,
Thanks and apologies for the slow reply. The cooktop I am looking at is the Miele KM 7200 FR with dimensions of 574mm W, 504mm D and 48mm H.
Looks like this should fit well. Not cheap but
|
By
Bryce Procter
·
#53827
·
|
|
Ladder
Anyone modify their back step to accept the stock ladder in a down position. Send like it would be easy enough to add a socket to the bumper and make it a lot easier to get in and out with gear
Anyone modify their back step to accept the stock ladder in a down position. Send like it would be easy enough to add a socket to the bumper and make it a lot easier to get in and out with gear
|
By
james Hosford
·
#53826
·
|
|
Re: Bow-thruster repair at anchor
Hello Charlie,
If I’m not mistaken, the A50 has a different BT. I believe it is made by Sleipner.
Congratulations on your 50.
Jean-Pierre Germain, SY Eleuthera, SM007, NZ
Hello Charlie,
If I’m not mistaken, the A50 has a different BT. I believe it is made by Sleipner.
Congratulations on your 50.
Jean-Pierre Germain, SY Eleuthera, SM007, NZ
|
By
Germain Jean-Pierre
·
#53825
·
|
|
Re: Bow-thruster repair at anchor
Thank you so much for this, Paul. I haven’t been very active on this group yet, but I was lucky to acquire SM#50 in the fall of 2017. I must admit the bowthruster has been quite a black box to me,
Thank you so much for this, Paul. I haven’t been very active on this group yet, but I was lucky to acquire SM#50 in the fall of 2017. I must admit the bowthruster has been quite a black box to me,
|
By
Charlie Kopp
·
#53824
·
|
|
Re: Water hoses in engine room
Hi Vic,
You note you've got a West Marine (WM) nearby and Kevin said he used Defenders. I just did a bunch of replacements - WM was $7.29 for the Scandvik ABA 316 SS SAE10. A local FL store (Boat
Hi Vic,
You note you've got a West Marine (WM) nearby and Kevin said he used Defenders. I just did a bunch of replacements - WM was $7.29 for the Scandvik ABA 316 SS SAE10. A local FL store (Boat
|
By
Craig Briggs
·
#53823
·
|
|
Re: Water hoses in engine room
Vic,
You have some good questions and it will be interesting to read the input. I can tell that for myself I try to only use the Shields exhaust hose below waterline and always double clamp those
Vic,
You have some good questions and it will be interesting to read the input. I can tell that for myself I try to only use the Shields exhaust hose below waterline and always double clamp those
|
By
James Alton
·
#53822
·
|
|
Re: Dolphin power 1 battery chargers
Thanks Stefan,
Very helpful. I will look into Victron battery balancer.
Kind regards
Ross
Sent from Yahoo Mail for iPad
Thanks Stefan,
Very helpful. I will look into Victron battery balancer.
Kind regards
Ross
Sent from Yahoo Mail for iPad
|
By
Ross Hickey & Donna Hammond
·
#53821
·
|
|
Re: Dolphin power 1 battery chargers
Hi Ross,
Appologies for the delay in answering, sailing to Datca now ;-)
The manual is now on the forum under Files, Search, type "Dolphin"
* suggest to ask D. for a manual of your 100A charger,
Hi Ross,
Appologies for the delay in answering, sailing to Datca now ;-)
The manual is now on the forum under Files, Search, type "Dolphin"
* suggest to ask D. for a manual of your 100A charger,
|
By
Stefan Jeukendrup
·
#53820
·
|
|
Re: Water hoses in engine room
Thanks Kevin! This is extremely useful!! I'll be following all that advice.
Thanks,
- Vic
Thanks Kevin! This is extremely useful!! I'll be following all that advice.
Thanks,
- Vic
|
By
Vic Fryzel
·
#53819
·
|
|
Re: Dolphin power 1 battery chargers
Hi Bill,
Totally agree with you about Varta. Bought mine in Croatia 2 years ago and they are nearly finished. Absolute rubbish. We are full time on the boat and have been very careful with our
Hi Bill,
Totally agree with you about Varta. Bought mine in Croatia 2 years ago and they are nearly finished. Absolute rubbish. We are full time on the boat and have been very careful with our
|
By
Barry Connor
·
#53818
·
|
|
Re: Dolphin power 1 battery chargers
Ross and Donna,
It is hard to say for sure. I had the same "non-changeable" Dolphin chargers on 2003 BeBe SM 387. In about 2007, I wanted to replace almost 4-year-old original Delco France Freedom
Ross and Donna,
It is hard to say for sure. I had the same "non-changeable" Dolphin chargers on 2003 BeBe SM 387. In about 2007, I wanted to replace almost 4-year-old original Delco France Freedom
|
By
CW Bill Rouse
·
#53817
·
|
|
Re: Dolphin power 1 battery chargers
Thanks for sending this through Bill, it is very helpful.
The 100amp charger that we have is the one in the first picture (JPG) that you forwarded. It does not physically have a switch. Does this mean
Thanks for sending this through Bill, it is very helpful.
The 100amp charger that we have is the one in the first picture (JPG) that you forwarded. It does not physically have a switch. Does this mean
|
By
Ross Hickey & Donna Hammond
·
#53816
·
|
|
Re: Dolphin power 1 battery chargers
Ross and Donna
It depends. Dolphin changed those chargers 3 times. First was no switch, then an A/B switch, then a selector switch with 10 different settings.
Here are a few things that may help:
Ross and Donna
It depends. Dolphin changed those chargers 3 times. First was no switch, then an A/B switch, then a selector switch with 10 different settings.
Here are a few things that may help:
|
By
CW Bill Rouse
·
#53815
·
|
|
Re: Wifi extenders and the bonding system
Hi Scott,
You made me curious about this Microtik product. Having worked with Cisco's Router OS, I'm not so easily scared off by this stuff, but this must be the worst documented piece of hardware
Hi Scott,
You made me curious about this Microtik product. Having worked with Cisco's Router OS, I'm not so easily scared off by this stuff, but this must be the worst documented piece of hardware
|
By
Arno Luijten
·
#53814
·
|
|
Re: Wifi extenders and the bonding system
I think it really depends on your use case. We are rarely in marinas and in some of the places we've been, mobile data is quite expensive and generally not truly unlimited. In Hawaii, anchored nearly
I think it really depends on your use case. We are rarely in marinas and in some of the places we've been, mobile data is quite expensive and generally not truly unlimited. In Hawaii, anchored nearly
|
By
Scott SV Tengah
·
#53813
·
|
|
Re: Amel 54. Has anyone ever taken the electric diesel tank level meter/sensor out of the tank?
Thanks all for the replies. The code WEMA S2-1170F makes me think the sensor has a length of 1170mm which sounds about right for the given tank. A good tip about the poor power-supply to the sensor.
Thanks all for the replies. The code WEMA S2-1170F makes me think the sensor has a length of 1170mm which sounds about right for the given tank. A good tip about the poor power-supply to the sensor.
|
By
Arno Luijten
·
#53812
·
|
|
Re: Amel 54. Has anyone ever taken the electric diesel tank level meter/sensor out of the tank?
I replaced the sensor on Adagio and could not find an exact match (I forget the model number, but it was indeed on a label on the sensor).
I wrote to Wema, they offered a couple of options and
I replaced the sensor on Adagio and could not find an exact match (I forget the model number, but it was indeed on a label on the sensor).
I wrote to Wema, they offered a couple of options and
|
By
Gary Wells
·
#53811
·
Edited
|
|
Re: Dolphin power 1 battery chargers
Thanks Stefan,
Can you please send the attachment.
Kind regards
Ross
Sent from Yahoo Mail for iPad
Thanks Stefan,
Can you please send the attachment.
Kind regards
Ross
Sent from Yahoo Mail for iPad
|
By
Ross Hickey & Donna Hammond
·
#53810
·
|
|
Re: Wifi extenders and the bonding system
I will second what Arno says about Marina wi-fi, I have an extender on the backstay, didn’t help with internet performance. Sure it gave me better wi-fi signal, but internet still sucked. After
I will second what Arno says about Marina wi-fi, I have an extender on the backstay, didn’t help with internet performance. Sure it gave me better wi-fi signal, but internet still sucked. After
|
By
Mark Garver
·
#53809
·
|