He Scott , first many thanks for your detaild awnser . i have been advised at Victron and Mastervolt for 800 Ah 12Volt in row 400 AH 24 V Mastervolt estimates the cost incl assembly to approx €

I have been asked for the gearbox ratio of the gearbox and I am away from the boat. The boat is a 1993 Super Maramu hull number 110. It is a Hurth gearbox. The engine is a Perkins M80T Can anyone

Hi Arlo, Bauer PE100 on Onan MDKAL 50Hz 220V Best regards, Stefan Jeukendrup sv Malaka Queen SM2k #348 @Turkey

Good morning Arlo, Here is how the Junior II was originally installed on the SM2K Scuba Compressor Bauer Junior Amel Super Maramu 2000 Nikimat Sailing Vessel Scuba Compressor Bauer Junior Amel Super

Some of my thoughts, original in regular font and my response in italics Sheriffdep As a thought - I also am considering if purchasing the SM2k doing a separate 12v bank purely for electronic usage

I replaced my motor. Yes, you need to grind down the shaft a bit - not sure about 20cm though... Also, the replacement is a newer model and they moved the solenoids to the forward (relative to your

I also have the Junior 2, electric and mounted in the cockpit locker. Great little compressor and runs off our 5kw inverter just fine. Tip: run it at night - with lower temperatures, the filter

Hi everyone, It's time to replace the good old anchor winch on our Euros 41. The thing is, per the original Amel design, the chain is not self-tailing as it is I believe on most Amels. We would like

Hi Rachel and Andy, My Aquarius is hull number 136, in relatively good shape, located in Spain. Where is yours? Valentin

My hose was completely broken away. I laminated a plastic hose instead. Not the nicest solution, works perfect since 4 years Peter, SV Wilson, SM 003, Neustadt Germany

Arno, Can you explain further the BMS BB communication issues? Am I wrong in saying Most drop in sets have the BMS? I know you can make the cells yourself and then add outside BMS but thought the

Hi Sheriffdep, It depends what you call a LiFePO battery. But I can tell you without a doubt that the (prismatic) cells you can buy at AliExpress and other sites have no BMS build in. Having a BMS

Earlier today, I discussed the upcoming meeting with the owner of QSails. He is going to present a video tour of his facility and has some simple-to-use graphic information to aid you in choosing the

I ordered 16x270 Ah prismatic cells from China for a DIY system, guess i get them 5-6 weeks from now, That will give me 540 Ah 24 volt, probably go for a rec BMS (compatible with Victron system), will

Reminder: Zoom meeting - QSails owner/manager will present sails for Amels When: Saturday, 12 September 2020, 20:00 to 21:00, (GMT+00:00) UTC An RSVP is requested. Click here to

Nope, not at all. Regards Ann-Sofie Skickat från min iPhone

Lady Annila Thank you! Now I understand, not very user friendly solution, not very Amel at all. Paul

Paul, to avoid build up, we pump out the bowl fully then flush with minimum of 25 strokes. We also use a mild acid solution to clean out this pipe when on the hard. Jean-Pierre Germain, Eleuthera,

Thank you for your reports to the forum. I can absolutely support Arno and Mohamad Our 110-IC is still running strong and has been very reliable with over 3000 hours. Touch wood ;-) Fair winds Ruedi &

We bought a used Bauer Junior II. 230/50hz. Wired it directly to the breaker board. We keep it in the port side cockpit lazarette and run it in the cockpit. The coolest, shadiest most well ventilated