This is a very enriching thread. Thank you all for such valuable information. I am also about to change my 30 kg. Wasi for either a Mantus 48 kg. or an Ultra in my SM. But I see no one talking about

These photos show what I received from Maud about a year ago. I had it installed here in Thailand, and looks good. I showed a photo installed, and how they cut it in the corners. They didn't cut it

Eric, I want jut to make sure that my name is on your list. Vladimir Sonsev 96 Fiddlers Hill Rd, Edgewater, MD 21037 Tel: 202 258 1916 Best Regards Vladimir S/V " Life is Food"

I am ordering these switches on Monday—sorry for the delay. They will be shipped to you express mail. If anyone else is interested, Please email me with the the quantity you wish and your

Hi Kent, Looks like I will order the switches Monday. Please send me your mailing address. Fair Winds Eric

Hi Ken,, Thanks for the tips. Thanks also for the video which is really helpful. We do have the rebuild kit on board in case we have to fit it. Vamos a ver. Ian and Judy, Pen Azen, SM 302, Kilada (

The Ultra 35kg fit well on my SM #278 Also, check this one out https://www.youtube.com/watch?v=VpfS_5WVTDs Jose Venegas Ipanema SM 278

China is a very big supermarket, Have a look on AliExpress, DZ SEAL Store is the dealer. I am anew owner, maramu 1986, so I look for sourcing. I bought some electronic, and electrical devices with

Hi Arlo, I used "D-section 342 with adhesive, 100 feet ($1.129 per foot), part 342HATS-100, from Clean Seal, Inc. P.O. Box 2919 – 20900 West Ireland Road South Bend, IN

McMaster Carr carries gasket material that matches and works/ I've used it opn my 1998 Sharki Aras Sharki #163 1988 -- Aras Grinius

Has anyone found a proper gasket for the Amel deck and cockpit lockers? I see lots of initial investigation so I am hoping that someone can post what they finally settled on. I see 1 post about

Hello Craig. good advice, and I have made sure that about 99 percent of what is on my Amel is the same setup as the original where possible.. ;-) I am used to having a visual indicator of fuel

Thanks Dennis!

Hello Ian and Judy, I rebuilt my bow thruster twice. The first time was in Trinidad, and the second time was in New Zealand 18 months ago. I made a video about the bow thruster

Hello, Looks like an old Lewmar footblock. There is a new model but the holes are different. You can find the old model on ebay uk. Fair winds Denis ex Meltem #32

Hello all. I need to replace the cheek block on my Mango. Does anyone know who the original manufacturwr or modelnof these blocks are ? Also any recommendations? Schaefer, Harken, garhauler, ronstan

Did you need to change the bow roller to the ultra style or did your stock super maramu one work with the new anchor?

Hi Bryce, Yeah I am aware of the 60 days refund but my intention is to sail AUSTRALIAN waters for the season (or maybe 2 seasons)😊 I hear the WHITSUNDAYS are magnificent. I could postpone

I just recently did this job. Jabsco claimsin their literature the holes on the new part align with the holes on the olderstyle base. They lied. The old style has 4 holes the new one has three

Hi. I did this job last summer. On our boat there is a metal backing plate in the basemould. I just sealed the old holes and drilled new ones. These I threaded and just bolted the new toilet