|
Locked
Re: Batteries starting to get weak - MMM - What to do -
Arno,
My Victron BMS reports cell level voltage down to 0.01v. I can view it via bluetooth and have seen it vary by 0.01v. I can attest that when I had an imbalance, up to 90% SOC, the cells had the
Arno,
My Victron BMS reports cell level voltage down to 0.01v. I can view it via bluetooth and have seen it vary by 0.01v. I can attest that when I had an imbalance, up to 90% SOC, the cells had the
|
By
Scott SV Tengah
·
#54512
·
|
|
Locked
Re: Batteries starting to get weak - MMM - What to do -
Hi Scott,
Typically good BMS-es can measure at 0.01 resolution. So even at lower SOC you will be able to see differences. Charging up to 100% can be postponed longer with continuous balancing. Active
Hi Scott,
Typically good BMS-es can measure at 0.01 resolution. So even at lower SOC you will be able to see differences. Charging up to 100% can be postponed longer with continuous balancing. Active
|
By
Arno Luijten
·
#54511
·
|
|
After market engine mounts ?
#replacement
Hello,
I am looking at replacing the engine mounts on my 2004 Yanmar 4JH3-HTE engine.
The current Yanmar mounts, (on the fuel and oil filter side), are labeled 200 which I believe would mean they are
Hello,
I am looking at replacing the engine mounts on my 2004 Yanmar 4JH3-HTE engine.
The current Yanmar mounts, (on the fuel and oil filter side), are labeled 200 which I believe would mean they are
|
By
Paul
·
#54510
·
|
|
Re: Bow Thruster Amel 54
Doug,
Thanks.
The A-54 bow thruster controls went through several changes during the production of the 54. This is great information for some 54 owners. Thanks again!
Bill
Doug,
Thanks.
The A-54 bow thruster controls went through several changes during the production of the 54. This is great information for some 54 owners. Thanks again!
Bill
|
By
CW Bill Rouse
·
#54509
·
|
|
Re: Bow Thruster Amel 54
Doug.
Very helpful. A great addition. Thank you
Porter McRoberts
S/V IBIS A54-152WhatsApp:+1 754 265 2206
Www.fouribis.net
Doug.
Very helpful. A great addition. Thank you
Porter McRoberts
S/V IBIS A54-152WhatsApp:+1 754 265 2206
Www.fouribis.net
|
By
Porter McRoberts
·
#54508
·
|
|
Bow Thruster Amel 54
I have spent the last couple of days trying to debug the side-power bow thruster on my boat, and the up/down 4 relay system. My motor for up/down had a bad bearing and was blowing a fuse. It appears
I have spent the last couple of days trying to debug the side-power bow thruster on my boat, and the up/down 4 relay system. My motor for up/down had a bad bearing and was blowing a fuse. It appears
|
By
Doug Smith
·
#54507
·
|
|
Locked
Re: Batteries starting to get weak - MMM - What to do -
Does anyone understand "continuous cell balancing", because I don't?
When I have had unbalanced batteries, the batteries are look perfectly balanced until you get to 90% + SOC. This is because of the
Does anyone understand "continuous cell balancing", because I don't?
When I have had unbalanced batteries, the batteries are look perfectly balanced until you get to 90% + SOC. This is because of the
|
By
Scott SV Tengah
·
#54506
·
|
|
Richiesta libera pratica sanitaria SY Euploia
Stefania Dente
By
ste.dente
·
#54505
·
|
|
Re: servicing mainsail fuller and outhaul
Thanks Bill, mine never had a cover.
Great I am on the right track.
Nick
Thanks Bill, mine never had a cover.
Great I am on the right track.
Nick
|
By
Nick Newington
·
#54504
·
|
|
Re: In case you missed the QSails ZOOM
Brilliant! Thank you Bill. These zoom meetings are incredibly valuable!
Guillaume
Carpathia III - SM2K #293
Now in Athens
Brilliant! Thank you Bill. These zoom meetings are incredibly valuable!
Guillaume
Carpathia III - SM2K #293
Now in Athens
|
By
Cathy & Guillaume
·
#54503
·
|
|
Re: servicing mainsail fuller and outhaul
Nick,
CW Bill Rouse Amel Owners Yacht
Nick,
CW Bill Rouse Amel Owners Yacht
|
By
CW Bill Rouse
·
#54502
·
|
|
Re: servicing mainsail fuller and outhaul
Nick,
Maybe I was not clear...I was talking about the forward-facing cover that you fabricated. I think all the 54's I have seen have a loose-fitting cover on the forward end...maybe yours was lost,
Nick,
Maybe I was not clear...I was talking about the forward-facing cover that you fabricated. I think all the 54's I have seen have a loose-fitting cover on the forward end...maybe yours was lost,
|
By
CW Bill Rouse
·
#54501
·
|
|
Battle Born Lithium Follow-up - Video of an Independent tear-down
If you were interested in Battle Born Batteries, here is an independent tear-down:
https://www.youtube.com/watch?v=G5E30u-66VI
And the same guy tearing down a Chinese Lithium from Ali Express
If you were interested in Battle Born Batteries, here is an independent tear-down:
https://www.youtube.com/watch?v=G5E30u-66VI
And the same guy tearing down a Chinese Lithium from Ali Express
|
By
CW Bill Rouse
·
#54500
·
|
|
Re: servicing mainsail fuller and outhaul
Hi Bill,
So the GRP cover was always there. I took it off and bedded it back with silicone. The odd thing is that the front end was left open for spay to go straight in. I decided to glue on a pvc
Hi Bill,
So the GRP cover was always there. I took it off and bedded it back with silicone. The odd thing is that the front end was left open for spay to go straight in. I decided to glue on a pvc
|
By
Nick Newington
·
#54499
·
|
|
Locked
Re: Batteries starting to get weak - MMM - What to do -
Hello,
Just had Flash battery Kaiken that does continuous cell balancing... but they don’t do batteries for yachts and private owners just for industrial companies.
so that s out for
Hello,
Just had Flash battery Kaiken that does continuous cell balancing... but they don’t do batteries for yachts and private owners just for industrial companies.
so that s out for
|
By
Denis Foster
·
#54498
·
|
|
Re: servicing mainsail fuller and outhaul
Nick,
I thought all A-54s had a cover where you made one, but maybe it was later model 54s. I do have an issue about the cover I have seen on 54s and that is there is not a good seal around the
Nick,
I thought all A-54s had a cover where you made one, but maybe it was later model 54s. I do have an issue about the cover I have seen on 54s and that is there is not a good seal around the
|
By
CW Bill Rouse
·
#54497
·
|
|
Locked
Re: Batteries starting to get weak - MMM - What to do -
Hi Paul,
This Best Lithium BMS still uses passive balancing and it does not say if it only does top-balancing. So from that perspective it's not a great BMS.
Arno
Hi Paul,
This Best Lithium BMS still uses passive balancing and it does not say if it only does top-balancing. So from that perspective it's not a great BMS.
Arno
|
By
Arno Luijten
·
#54496
·
|
|
Event: Jimmy Cornell - Crossing the Atlantic via ZOOM and YouTube - Saturday, 10 October 2020
#cal-invite
Jimmy Cornell - Crossing the Atlantic via ZOOM and YouTube
When:
Saturday, 10 October 2020
20:00 to 21:00
(UTC+00:00) UTC
Where:
Internet ZOOM
Organizer: Bill
Jimmy Cornell - Crossing the Atlantic via ZOOM and YouTube
When:
Saturday, 10 October 2020
20:00 to 21:00
(UTC+00:00) UTC
Where:
Internet ZOOM
Organizer: Bill
|
By
main@AmelYachtOwners.groups.io Calendar <main@...>
·
#54495
·
|
|
Re: Canvassing for ideas: removing motor housing A54 “MAT” foiling motor.
hi Porter it does come off but lots of prying and force and lube. I still had to buy a new one as it could not be repaired in grenada. I believe in the south Pacific they are more creative so good
hi Porter it does come off but lots of prying and force and lube. I still had to buy a new one as it could not be repaired in grenada. I believe in the south Pacific they are more creative so good
|
By
Courtney Gorman
·
#54494
·
|
|
servicing mainsail fuller and outhaul
I recently serviced both main furling and outhaul gears and motors. I found the aluminium shaft on the furling motor very difficult to remove. It was soaked 48 hours in diesel and then pressed out
I recently serviced both main furling and outhaul gears and motors. I found the aluminium shaft on the furling motor very difficult to remove. It was soaked 48 hours in diesel and then pressed out
|
By
Nick Newington
·
#54493
·
|