Hi Mark, It is the fuel line that runs from the fuel shut off valve along the side of the fuel tank to the first filter. Thanks -- Mark & Nicky Barter S/V Nunky SM 110

No i clean the Turbo make nwe seals and it works perfekt Elja SM Balu 222 Von meinem iPhone gesendet

This is how mine is, just some corrosion at the valve, have decided to put it back and ser if it works now after cleaning, else buy a new one. Paul on sykerpa SM 259

Hi Alan, Here are a couple of pictures of ours, if it can help. The wheels were changed by me and are not original (couldn’t find them). Not on the boat at the moment, so cannot take dimensions.

Thanks Dave, That would be great ! No rush, I'm not going anywhere for a while ! Look forward to the photos and drawing. Cheers Alan ELYSE SM437

Thanks Danny, I'll let you know. Alan

The Amel "C" drive design presents a novel marine engine mount configuration, namely, there is absolutely no thrust component and the mounts are not fastened to the engine! Conventional "factory spec"

yes i have the tamd pb

Hello Rob I remember this video about turbo. It might Help ... There are 4 videos on the subject. https://youtu.be/43_WfBTbuH0 Alain Envoyé de mon iPhone

Hi Paul, I believe the 200 refers to a capacity of 200 kg. When Didier, an experienced Amel mechanic in Le Marin replaced our original mounts for our 2004 Yanmar 4JH3-HTE engine he suggested

I have mine set up now and I’ll be on my SM2 on Friday. I’ll send photos. I am also going to make a new plank for the passerelle because mine is coming apart. I’ll send along a dimensioned

Question??? Are you sure of the engine desig? TMD22 is the usual engine , not the TAMD... Jean-Pierre Germain, Eleuthera, SM007, OPUA,NZ

I always use Factory supplied parts for both the engine and generator. With respect to the engine mounts do the mounting holes line up with your existing mounts. Do you have the alignment tool

Hi Alan, I have them and if you dont get help elsewhere I can pull it all out and photograph it for you. Let me know. Danny SM 299 Ocean Pearl Mangonui New Zealand

Hi all SM owners, Our swim ladder is just that, we have the wheels and the deck step end but none of the parts to make it into a usable pasarelle. Does anyone have the specifications for the original

Hi Scott, Don't get me wrong. I'm not against Lithium. I'm just trying to bring some nuance to the many über-happy stories about Lithium. These things are bloody expensive and people should know what

This is my 6 yr old turbo from Volvo tamd22 after being cleaned. I have a loss of rpm only able to get 2200. Is this rust color normal? I'm wondering about all the pitting. I have a new turbo on

Arno, My Victron BMS reports cell level voltage down to 0.01v. I can view it via bluetooth and have seen it vary by 0.01v. I can attest that when I had an imbalance, up to 90% SOC, the cells had the

Hi Scott, Typically good BMS-es can measure at 0.01 resolution. So even at lower SOC you will be able to see differences. Charging up to 100% can be postponed longer with continuous balancing. Active

Hello, I am looking at replacing the engine mounts on my 2004 Yanmar 4JH3-HTE engine. The current Yanmar mounts, (on the fuel and oil filter side), are labeled 200 which I believe would mean they are