Thanks Mark for the offer! Interesting how many people actually carry that type of equipment. I’m looking forward to learn more about the process and de-mystify fridges. I may take you on your offer

Thanks Porter, I think I know who you are referring to. Met Mike on several social occasions last year. I’ll probably pick his brains. Thanks Thomas

Thanks Arno Do you know where this filter is located by any chance? Also, in the probable case I have a leak, how did you conclude it was located in the seawater heat exchange? We have the original

Thanks Mohammad, Hi tried rigging one of my led saloon lights to the connection points on the controller but it didn’t show anything. I blame my rigging/understanding of the connection points. As an

Thomas, If you need avacuum pump and gauges, I have a set. You know where to find me J With bestregards, Mark Skipper Sailing Vessel- Cream Puff - SM2K - #275 Currentlycruising -

Hi All I'm just about to replace my forestay and need to 'drop' the Genoa furler. Can someone please offer me advice on how to do it? Regards Rob SY FORESIGHT SM #152

Thomas. Likely you can sort this yourself, but if not I have a soup to nuts Refrigerator guy here in Tahiti if you need one. Porter Porter McRoberts S/V IBIS WhatsApp:+1 754 265

Hi Thomas, Ice crystals would occur if the filling of the system was not done properly. There is a filter in the system that binds any moisture that may be left at filling time. Normally they replace

Hi, Is there more than one version of the Marina pump? My pump has a cog wheel that drives the pump diaphragm. I do not see it in this diagram. Fair Winds, Eric Sm376 Kimberlite

Hi Thomas; We had a similar situation last year. The controller on the compressor is equipped with an LED or a connection point that an LED can be connected to, so the unit will give you one of 4

The following files have been uploaded to the Files area of the main@AmelYachtOwners.groups.io group. /EX_MARINA.pdf By: Mark McGovern Description: AMFA Marina Electric

Hi Nick, Whilst I agree serpentine belts are the ultimate for these applications, I would have to say that in 7 years we have had no issues with the twin belt setup on our Yanmar with Leece Neville

Hi all, Our fridge evaporator seems to be partially and intermittently cold. And the compressor runs but stops after a while. It had happened recently that the fridge stopped cooling but after a stop

Re-attaching the exploded assembly drawing for the AMFA Marina/TF Marine TM 50 electric sump pump since it did not seem to attach to my previous post! -- Mark McGovern SM #440 Cara Deale, MD USA

Guillaume, My AMFA Marina electric sump pump stopped working just this past weekend. I removed it from the engine room and took it apart and found that one of the two (2) diaphragms inside has failed

Many thanks Mark Alan

Many Thanks Guillaume Alam

The rust is normal and the pitting does not look terrible. The exhaust housing is made from cast iron so it will start the rust the second you stop cleaning it unless you coat it with something. I

I think i found the cause of the corrosion on the turbo. this is the picture of our old exhaust elbow. we had replaced I think sea water was spraying in onto the inside of the turbo housing

Rob, while you have the Turbo off, You might paint it with automotive exhaust header paint. Once it is heated up it cured and you will never have a rusty turbo. Fair Winds, Eric SM 376