Hello, I have changed the sonic speed for a DST 800 analogic. It doesn’t work because the sounder is 200 kHz on the DST Airmar and 170 kHz on the B&G. Dominique Irko 1 A54-#16

As I said in a previous post ,I have a new B&G FLS and have not found it useful , the bottom is depicted in a brown color and moving forward I have brown spikes appear in front of the boat as well as

Ian, Thanks, your review makes sense, and... Very helpful to me.. I also inherited a boat with FLS (Echo Pilot), and loved it! Knowing that your Echo Pilot made it 20 years makes me like the product

Hi All, I say all because this thread has certainly created interest. We have the Interphase FLS. Like radar and it seems many other FLS units it needs experience and interpretation. I find it useful

Arnold Very informative Thank you Andre

Eric is correct, Apply a thin layer, wait a little and and remove any excess with a lint-free cloth. For your boat half liter is enough ( ± 15 £ ). The results are amazing. José

Hi, Polytrol label states that the product should be applied with a lint free cloth. Wait 10 minutes and wipe off the excess. If you leave it on without wiping off the excess the deck will be sticky

Here's a source for $370.95, (regular $616.70). I know absolutely nothing about them or the part, which seems to have a few "Types". Caveat emptor and all that but send me 10% of the savings ;-) --

I am investigating the possibility for using paddle speed transducer. There is Analog version of DST800 available. The specification are saying it is only for Raymarine ST60 but as I remember on my

Contact Roger Underwood at Nance and Underwood Rigging FortLauderdale. 954-764-6001 $616.70 Also called the "soft start" device, I sometimes see these in the same failure mode you describe on

Dear Amelians, thx a lot for your numerous helpful responses. For the Amels with the Echopilot 2D units AND the B&G Sonic Speed Sensors and/or Depth Sounders (Standard on the AMEL 54): Are there

Philippe Merci Andre

For the desk epoxy 2 composants SHERWIN- WILLIAM Company, colour SABLE ref SW6083. http://www.sherwin-williams.com Or to renew the color polytrol at owatrol.com For the "black" lines I use a striper

S/V A55#9 Seeking wiring diagrams for the double shunt and the 8 x AGM 160 V, 12 A batteries. Stuart Hemingway

Hello all, I used to run a large catamaran that doubled as a survey vessel, we were looking for ancient ship wrecks. Mostly in shallow water. We worked in Asia and Mozambique among other places. The

Ken and All, I searched for one of the Echo Pilot 2D units (part #81034 with the bronze transducer housing) from US stores and found no stock. Also a statement on one website that said that the

Gerhard, Delighted to read your post and learn that Greece has such skills. Not always the way ! Ian

Jose Thanks again Andre

Andre One coat - 1 liter it is enough, use a normal brush and wait at least 48 hours There are only one color- transparent. The original color must be restored by this kind of " varnish". Make a

Hello, Hope this finds everyone doing well. Having trouble finding a supplier with this part. This is for the portside large electric ST58 winch. Does anyone have one for sale or know of a supplier