|
Re: 24 v main switch
It is indeed the way it is.. also the same for the 110v inverter. I, in upgrading to my Lipo / Victron added fuses and a switch for the charging devices and the inverter.
It is indeed the way it is.. also the same for the 110v inverter. I, in upgrading to my Lipo / Victron added fuses and a switch for the charging devices and the inverter.
|
By
Chris Doucette
·
#55051
·
|
|
Re: Victron Quattro charger/inverter installation
Hi James,
Great to know you are in Cartagena. We are in Curazao waiting for the port of Cartagena to open, which theoretically will be next week but it has been delayed several times. I decided to
Hi James,
Great to know you are in Cartagena. We are in Curazao waiting for the port of Cartagena to open, which theoretically will be next week but it has been delayed several times. I decided to
|
By
Jose Venegas
·
#55050
·
|
|
Re: 24 v main switch
Bill,
I noted that, in IPANEMA, the cables from the battery chargers connect to the battery side of the main switch. In other words, they are still hot after turning the main switches OFF. : Is this
Bill,
I noted that, in IPANEMA, the cables from the battery chargers connect to the battery side of the main switch. In other words, they are still hot after turning the main switches OFF. : Is this
|
By
Jose Venegas
·
#55049
·
|
|
Re: Problem with bowthruster
Hi Alexandre,
They now only sell a complete set.
Fair Winds
Eric
Hi Alexandre,
They now only sell a complete set.
Fair Winds
Eric
|
By
eric freedman
·
#55048
·
|
|
Re: Problem with bowthruster
Below is the answer from AMEL—I wonder if anyone else had the same problem. I had to order an entirely new kit.
I also had to redrill the holes in the end cap. I noticed that the thickness of the
Below is the answer from AMEL—I wonder if anyone else had the same problem. I had to order an entirely new kit.
I also had to redrill the holes in the end cap. I noticed that the thickness of the
|
By
eric freedman
·
#55047
·
|
|
Re: Problem with bowthruster
Eric!
We had the same issue I bought a new kit from Maud this summer, put everything together, but the new lid did not fit with the old screw holes , so I used the old lid, looked very similar to me.
Eric!
We had the same issue I bought a new kit from Maud this summer, put everything together, but the new lid did not fit with the old screw holes , so I used the old lid, looked very similar to me.
|
By
Paul Osterberg
·
#55046
·
|
|
Re: LiFePO4 Conversion on sv BeBe - SM#387
Hi José,
I think they are willing to deliver also to the USA. I don't know what import regulations exist and what the import tariff is.
All these companies are offering guaranties (1 or 2 years, but
Hi José,
I think they are willing to deliver also to the USA. I don't know what import regulations exist and what the import tariff is.
All these companies are offering guaranties (1 or 2 years, but
|
By
Willem Kroes
·
#55045
·
|
|
Re: Problem with bowthruster
Hi, perhaps this file can help you,
Fair winds
Philippe
M207
De : main@AmelYachtOwners.groups.io [mailto:main@AmelYachtOwners.groups.io] De la part de eric freedman
Envoyé : lundi 26 octobre
Hi, perhaps this file can help you,
Fair winds
Philippe
M207
De : main@AmelYachtOwners.groups.io [mailto:main@AmelYachtOwners.groups.io] De la part de eric freedman
Envoyé : lundi 26 octobre
|
By
Philippe Belloir
·
#55044
·
|
|
Re: Problem with bowthruster
On October 26, 2020 at 4:20 AM eric <kimberlite@...> wrote:
Hi Alexandre,
I had just installed a new complete kit .
It failed in 15 minutes of use.
I have another complete kit.
On October 26, 2020 at 4:20 AM eric <kimberlite@...> wrote:
Hi Alexandre,
I had just installed a new complete kit .
It failed in 15 minutes of use.
I have another complete kit.
|
By
eric freedman
·
#55043
·
|
|
Re: Problem with bowthruster
Hi Alexandre,
I had just installed a new complete kit .
It failed in 15 minutes of use.
I have another complete kit.
I cannot figure out what the cause of my problem was.
I hope to be in SXM
Hi Alexandre,
I had just installed a new complete kit .
It failed in 15 minutes of use.
I have another complete kit.
I cannot figure out what the cause of my problem was.
I hope to be in SXM
|
By
eric freedman
·
#55042
·
|
|
Re: Problem with bowthruster
Good morning Eric,
In 2017, I had a similar happening with the bow thruster.
High pitch sound and no propeller turning….
The gear also did not look that bad.
Good morning Eric,
In 2017, I had a similar happening with the bow thruster.
High pitch sound and no propeller turning….
The gear also did not look that bad.
|
By
Alexandre Uster von Baar
·
#55041
·
|
|
Problem with bowthruster
I recently rebuilt my bow thruster, . Upon leaving the dock today my bow thruster did not work and made a whirring noise. When I took it apart I saw that the gears were worn. My gears on my old bow
I recently rebuilt my bow thruster, . Upon leaving the dock today my bow thruster did not work and made a whirring noise. When I took it apart I saw that the gears were worn. My gears on my old bow
|
By
eric freedman
·
#55040
·
|
|
Re: 24 v main switch
Bill, Yes that's the plan, to label, bus bar and fuses
Paul
Bill, Yes that's the plan, to label, bus bar and fuses
Paul
|
By
Paul Osterberg
·
#55039
·
|
|
Re: 24 v main switch
Utilize some Bus Bars. Be sure to label all of the wires
CW
Utilize some Bus Bars. Be sure to label all of the wires
CW
|
By
CW Bill Rouse
·
#55038
·
|
|
24 v main switch
I'm in the process to install LiFePO4 cells, I like to tidy up among some of the wiring, install some fuses etc. Now to my question. From the 24 V main switch there are 5 cables.one thick black cable
I'm in the process to install LiFePO4 cells, I like to tidy up among some of the wiring, install some fuses etc. Now to my question. From the 24 V main switch there are 5 cables.one thick black cable
|
By
Paul Osterberg
·
#55037
·
|
|
Re: LiFePO4 Conversion on sv BeBe - SM#387
Good morning Hanspeter,
I'll try to answer your question, but at the end of the day what really matters is what you are wanting to achieve on your boat and how you live on your boat.
A couple
Good morning Hanspeter,
I'll try to answer your question, but at the end of the day what really matters is what you are wanting to achieve on your boat and how you live on your boat.
A couple
|
By
Dan Carlson
·
#55036
·
|
|
Re: Maramu #162 for sale
Perhaps a discussion is best done away from the Owners Group. My email: bob_chapm@....
Ah ha, i see that 162 is the hull number. I wasn’t quite awake yet. Can you send full equipment list?
Bob
Perhaps a discussion is best done away from the Owners Group. My email: bob_chapm@....
Ah ha, i see that 162 is the hull number. I wasn’t quite awake yet. Can you send full equipment list?
Bob
|
By
Bob Chapman
·
#55035
·
|
|
Re: Maramu #162 for sale
We have decided that we want to get an Amel, but I’m not familiar enough yet to know what a “Maramu 162” is: length? Number of cabins? Etc.
Please enlighten me!
Bob. Chapman
We have decided that we want to get an Amel, but I’m not familiar enough yet to know what a “Maramu 162” is: length? Number of cabins? Etc.
Please enlighten me!
Bob. Chapman
|
By
Bob Chapman
·
#55034
·
|
|
Re: LiFePO4 Conversion on sv BeBe - SM#387
Hi Dan,
Thank you for describing your system with such detail. Your experience and that from Brian from Delos were very helpful to me as I was upgrading Ipanema to Lithium.
Here is my experience,
Hi Dan,
Thank you for describing your system with such detail. Your experience and that from Brian from Delos were very helpful to me as I was upgrading Ipanema to Lithium.
Here is my experience,
|
By
Jose Venegas
·
#55033
·
|
|
Re: LiFePO4 Conversion on sv BeBe - SM#387
The price looks great! !! What kind of warranty do they offer?
I are they selling the US?
José
Ipanema SM768
CuraçAI
The price looks great! !! What kind of warranty do they offer?
I are they selling the US?
José
Ipanema SM768
CuraçAI
|
By
Jose Venegas
·
#55032
·
|