Interested. Bill, you are our hero. Martin AMEL 54 # 149 CHIARA

Interested. Thx Bill for this great initiative! You are our hero. Martin AMEL 54 #149 CHIARA

 Amelians, I also seek a replacement for this three way junction in the roof of the engine room above the hot water tank on the port side. I have mended it with some exhaust pipe tape several

Hello Bill, I am also very interested in this PVC manifold.May be, we could use the free valve in the A 54 to regularly flush the system with fresh water. This would prevent the formation of organisms

Aquarius was fitted with new plugs on the Genoa Track, used 5200. Video https://www.youtube.com/watch?v=phe2_3JAji0 About 12:58 minutes is where it shows the new plugs. I am happy with them, they

Bill, good morning - well here at least! Carango would be interested in an A54 manifold. Thank you and best wishes Peter Peter Forbes Carango A 54 #035 La Rochelle 00447836 209730 07836 209730

CW Bill Rouse <brouse@...>, 8 Ara 2020 Sal, 19:10 tarihinde şunu yazdı: -- Aktan TEMiZ +90 532 296 5599 aktantemiz@...

Thanks everyone for the comments. We're in Tahiti now so probably will wait until a cheaper place (anywhere!!!) before we buy a replacement. The leather cover is getting a bit tired, so it's probably

Thanks Danny. That’s reassuring. With bestregards, Mark Skipper Sailing Vessel- Cream Puff - SM2K - #275 Currentlycruising - Tahiti, French Polynesia www.creampuff.us

Is there an Antigua FaceBook Page you can inquire on? ~~~⛵️~~~Matt

Does anyone have a recommendation for a surveyor in Antigua? We are doing our haul out bottom paint and the usual maintenance next week. Was thinking that if I need a survey for the next round of

I had the same problem. The plastic seat was totally busted. After contacting Amel, they told me they cannot supply a replacement, so I looked on line. I found a really good replacement at Wayfair in

Hi Bill, This is also of interest to me. As you know in March/April 2018 my Primary manifold broke off and we installed a new AMEL supplied unit. 1 year later, preparing to continue to SOLOMON

Interested...Thanks for your efforts on this project! Steve Aloha SM72

Scott, I also had an uncomfortable spot right in the middle of the seat @ the nav station; it almost looked something was trying to poke thru the leather. Last year December, when AMELIT went on

Hi Mark, I didn't coat them with anything. As to longevity, I only have two or three years up so far but I have no reason to expect them to fail prematurely. Regards Danny SM 299 Ocean Pearl

Hi Mike, Thanks. Good idea. But, I already have the plugs. With best regards, Mark Skipper Sailing Vessel - Cream Puff - SM2K - #275 Currently cruising - Tahiti, French

Thanks Danny. I have a dremel tool bit I think will work well toclean the holes. Just to clarify, you didn’t coat the plugs with anything? Andthey have lasted well? I do believethere is more

Thanks Eric. Yes my plugs do fit. I like the caulk idea but I already have the plugs and Ithink using them might be less labor intensive. With best regards, Mark Skipper Sailing

Hi Scott, If you pull the cover from the bottom seat section you will see that the plastic frame is all broken. I tried filling the inside of the plastic seat base with dense foam from a can after