|
Re: Any SM owners use a Beta engine??
"Alternators are highly reliable". If that were the case you would never see alternator/generator repair shops. I've had my Maramu for 19 years and have replaced the house alternator three times.
"Alternators are highly reliable". If that were the case you would never see alternator/generator repair shops. I've had my Maramu for 19 years and have replaced the house alternator three times.
|
By
Dennis Johns
·
#55845
·
|
|
Re: Any SM owners use a Beta engine??
I believe the Beta 85 is a good choice for the SM or the 54. This engine does not have a computer with multiple sensors and is made with a reliable Kabuto 4 cylinder diesel engine. Several of my
I believe the Beta 85 is a good choice for the SM or the 54. This engine does not have a computer with multiple sensors and is made with a reliable Kabuto 4 cylinder diesel engine. Several of my
|
By
CW Bill Rouse
·
#55844
·
|
|
Re: User manual Maramu 46
#solution
Thank you for the manual
Happy Christmas
Philippe
De : main@AmelYachtOwners.groups.io [mailto:main@AmelYachtOwners.groups.io] De la part de CW Bill Rouse
Envoyé : lundi 21 décembre 2020
Thank you for the manual
Happy Christmas
Philippe
De : main@AmelYachtOwners.groups.io [mailto:main@AmelYachtOwners.groups.io] De la part de CW Bill Rouse
Envoyé : lundi 21 décembre 2020
|
By
Philippe BELLOIR
·
#55843
·
|
|
Re: Any SM owners use a Beta engine??
Dirk,
I can't think of a good reason to have two separate 12V alternators. Charging a separate engine battery and a house battery bank can be handled in many less complex ways. Alternators are
Dirk,
I can't think of a good reason to have two separate 12V alternators. Charging a separate engine battery and a house battery bank can be handled in many less complex ways. Alternators are
|
By
Karen Smith
·
#55842
·
|
|
Jimmy Cornell ZOOM meeting and the Elcano Challenge, Aventura Zero
Many of you attend or later watched the Jimmy Cornell ZOOM meeting in October. During that meeting, Jimmy explained his newest project, the Elcano Challenge, Aventura Zero.
Jimmy had to abort in the
Many of you attend or later watched the Jimmy Cornell ZOOM meeting in October. During that meeting, Jimmy explained his newest project, the Elcano Challenge, Aventura Zero.
Jimmy had to abort in the
|
By
CW Bill Rouse
·
#55841
·
|
|
Re: Any SM owners use a Beta engine??
Good day Amel lovers,
We are also planning to replace our perkins with a Beta 60 on our Maramu. We also plan to replace our batteries for 8 x 100 Ah lithium batteries. Is it sufficient to have one
Good day Amel lovers,
We are also planning to replace our perkins with a Beta 60 on our Maramu. We also plan to replace our batteries for 8 x 100 Ah lithium batteries. Is it sufficient to have one
|
By
Dirk Hazenoot Maramu Hull 171
·
#55840
·
|
|
"Apple is examining a chemistry for the car battery called LFP, or lithium iron phosphate, for its car", that will bring the cost down for all of us
https://www.reuters.com/article/us-apple-autos-exclusive/exclusive-apple-targets-car-production-by-2024-and-eyes-next-level-battery-technology-sources-idUSKBN28V2PY
--
John Bernard "JB" Duler
San
https://www.reuters.com/article/us-apple-autos-exclusive/exclusive-apple-targets-car-production-by-2024-and-eyes-next-level-battery-technology-sources-idUSKBN28V2PY
--
John Bernard "JB" Duler
San
|
By
JB Duler
·
#55839
·
|
|
Re: Waterleak
Jose,
The O rings might look good, but still a good idea to change them out if you haven't already done so. Make sure you put a lot of grease on the shaft before you put it back in the
Jose,
The O rings might look good, but still a good idea to change them out if you haven't already done so. Make sure you put a lot of grease on the shaft before you put it back in the
|
By
Ken Powers SV Aquarius <ken@...>
·
#55838
·
|
|
Re: User manual Maramu 46
#solution
Maramu Manual.pdf
CW Bill Rouse Amel
Maramu Manual.pdf
CW Bill Rouse Amel
|
By
CW Bill Rouse
·
#55837
·
|
|
Re: Water ingress
There is one more possible source. Call it #7.
It is the hose and its connections from the anchor locker. The anchor locker hose is connected to a T fitting in the floor near the Depth Sounder. It is
There is one more possible source. Call it #7.
It is the hose and its connections from the anchor locker. The anchor locker hose is connected to a T fitting in the floor near the Depth Sounder. It is
|
By
CW Bill Rouse
·
#55836
·
|
|
Re: Waterleak
This hose circled in green is the drain hose to the gray water sump (bilge). It carries mostly gray water, but some saltwater from the chain locker is carried to the bilge via this hose.
This hose circled in green is the drain hose to the gray water sump (bilge). It carries mostly gray water, but some saltwater from the chain locker is carried to the bilge via this hose.
|
By
CW Bill Rouse
·
#55835
·
|
|
Re: Water ingress
Jose,
If the water is seawater as you say, the sources of the seawater in this spot in the order of probability are:
Bow Thruster seals
Toilet flush hose hole or crack forward of the saloon/forward
Jose,
If the water is seawater as you say, the sources of the seawater in this spot in the order of probability are:
Bow Thruster seals
Toilet flush hose hole or crack forward of the saloon/forward
|
By
CW Bill Rouse
·
#55834
·
|
|
Re: English/French Dictionary
Hello nicolas, i have the same problème with my Maramu (1986 too), can you send me the manual.
When I will be on board, I send you all the docs I have.
You can have a look on
Hello nicolas, i have the same problème with my Maramu (1986 too), can you send me the manual.
When I will be on board, I send you all the docs I have.
You can have a look on
|
By
Philippe BELLOIR
·
#55833
·
|
|
Re: Waterleak
Hello Ken,
Following your advice, I checked the transducer o'ring and it seems ok. I'll keep an eye on it.
Thanks god I'm not having problem with the aft bathroom, but its nice to know your experience
Hello Ken,
Following your advice, I checked the transducer o'ring and it seems ok. I'll keep an eye on it.
Thanks god I'm not having problem with the aft bathroom, but its nice to know your experience
|
By
JOSE PRIETO
·
#55832
·
|
|
Re: Waterleak
Hello Bill!
You are correct in your observation regarding the anchor wash system in my SM.
So, I already discard this option.
Regarding TDS test, I did not made the accurate test.
I order a TDS meter,
Hello Bill!
You are correct in your observation regarding the anchor wash system in my SM.
So, I already discard this option.
Regarding TDS test, I did not made the accurate test.
I order a TDS meter,
|
By
JOSE PRIETO
·
#55831
·
|
|
Re: Water ingress
Hello Sabine!
Thanks for the advice, but the water is 100% salted!
Keep searching,
Cheers
--
Jose Prieto
SV Wayag, SM 323
Currently Alicante, Spain
Hello Sabine!
Thanks for the advice, but the water is 100% salted!
Keep searching,
Cheers
--
Jose Prieto
SV Wayag, SM 323
Currently Alicante, Spain
|
By
JOSE PRIETO
·
#55830
·
|
|
Re: English/French Dictionary
Hi Peter !
I just recieved an owner manual for my Maramu 46 in english and your work would be very helpfull to me
You can e-mail me at : nicolastine@...
Thanks a lot
Hi Peter !
I just recieved an owner manual for my Maramu 46 in english and your work would be very helpfull to me
You can e-mail me at : nicolastine@...
Thanks a lot
|
By
Nicolas Tiné
·
#55829
·
|
|
User manual Maramu 46
#solution
Hi everybody. I recently bought Marmaid, a Maramu 46/1986, and I want to know if some of you have an english or french copy of the User Manual
The boat is rather sophisticated and specific, so it
Hi everybody. I recently bought Marmaid, a Maramu 46/1986, and I want to know if some of you have an english or french copy of the User Manual
The boat is rather sophisticated and specific, so it
|
By
Nicolas Tiné
·
#55828
·
|
|
Re: Waterleak
Hi Jose,
we had similar puddles in the same area. I found that the hose clamp that holds the hose on the pipe through the wall aft had failed. It was only hold in place because the hose with clamp is
Hi Jose,
we had similar puddles in the same area. I found that the hose clamp that holds the hose on the pipe through the wall aft had failed. It was only hold in place because the hose with clamp is
|
By
Michael & Robyn
·
#55827
·
|
|
Re: Port side Front Navigation Light unreliable
On Sun, Dec 20, 2020 at 09:36 AM, CW Bill Rouse wrote:
Preparing to pull wireThank y'all for the explanation and the tricks of the trade. I will see whether I can source the Belden cable here in
On Sun, Dec 20, 2020 at 09:36 AM, CW Bill Rouse wrote:
Preparing to pull wireThank y'all for the explanation and the tricks of the trade. I will see whether I can source the Belden cable here in
|
By
Michael & Robyn
·
#55826
·
|