Does anyone know where you can buy the tanks shown in Phillipe's post. I have one of those tanks and wanted to replace it but the only retail source I could find was Accastillage Diffusion.

You can see two differents solutions, and the way to install (but in french) Fair winds Philippe De : main@AmelYachtOwners.groups.io [mailto:main@AmelYachtOwners.groups.io] De la part de Sarah

Ken, When the drain pump failed on the original Austrail Clothes washer I bought one here: https://www.espares.co.uk/search?SearchTerm=dishwasher%20pump I was lucky in that I matched what I thought

Bernd, The best advice you can find was just given to you by Craig Briggs, who owns a Santorin like yours. You can contact ACMO at www.ACMO.fr or Laetitia Boudon <laetitia@...>, +33 03 81 35 70 86.

This would be really useful, Thank you so much 😀😀 Sarah & Trev

I actually have a schematic of a holding tank designed by Amel. When I get home from work, I would gladly post it . The tank should fit both Sharki's & Maramu's since the forward head are about the

Hi Jim, We'd be interested in seeing the pictures if that's possible. You can use the email address at the top to send anything through to. If there's a lot we can share a folder on Dropbox. Thank

Thanks for the information Ian. Thats interesting to know that you can have them installed without ripping the heads apart. Kind regards, Sarah

We have a holding tank in both heads, around 75 litres each. They were fitted by the first owner when the boat was fairly new. Go to photos and search Santorin holding tanks and you will see the

Thanks ALL, I will be heading back to Lithuania in a few weeks, and will try to contact him from there. If not I am going to try to find the closest pump and retrofit! All the best! Ken Aquarius

Hi Nick, That you've got a spare with you suggests you can easily do this yourself. With a couple of dock-mates you can likely do it in half a day - it is not rocket science. There are several posts

Hi Sarah , hi Trev, We have an older Maramu (#79) and installed a holding tank in the forward head - the boat does not need go come out of the water for this work , as it uses the same sea cock

Hi Bernd, This is one of those questions that sits on the border of engineering and philosophy, with no clear winner. Much like "What is the "best" anchor". I'd encourage you to read the many past

Hello Sarah & Trevor, I Just acquired a SM from 1995. There was no holding tank installed. I am currently in the process Of installing one based on a tuto (here attached) Mine is the same but a

Nick, There are options in Antigua, but none in the entire Caribbean are better than Caraibe Marine Greement (Rigging) in Martinique. They are a Preferred Vendor and have rerigged at least 50 SMs &

Hi, can anyone please recommend a rigger here in Antigua who has experience in replacing a forestay on my SM please? I have the ACMO forestay with me, but looking for someone who has done this

Juan, Over the years of production, some Onan generators have Normally Closed (NC) sensors and other Onans have Normally Open sensors (NO). Just because some other Super Maramu had NC sensors does not

Hi Kent, Thanks for your advise. Next time my Onan will shut down i will try to short circuit the exhaust sensor or the coolant sensor to identify the origin of the pb. Best regards Juan de

Hi Juan, Thank you for answering my post about transmission . I had a similar issue with my ONAN shutting down and found that the sensor on the exhaust elbow was faulty. I had a spare and was back

It required removing nearly All of the forward head trim. A plastic unit that fit behind the panels which were replaced. I think I may Have some Pictures and will try To find them Best regards Jim