We used International Toplac Ivory with about 10% Toplac Cream as international no longer make Brightside. The mix was a very good max. We brought the Beugler tool but didn’t use it as we felt we

We have had a 200 liter fuel bladder made by nauta for many years. they made two types. The better one which we have has a nylon outer coating , brass connectors and hold down straps. We fill it and

Hi Dan, thank you for the info your structure looks great. Would you kindly send the phots directly to my email. matti.lohikoski@... When I try to download from the site, I get only 71k which is too

I uploaded photos of our canvas to the Photos section. Thanks, Dan Feierabend SM #86

Ww used Interlux Brightsides Hatteras White with a flattening agent. Very close match. Two coats. Looks great after three years. About 40 hours per coat. Be careful with the striping tool. Despite

Dear all, I finally made it to get my Beugler striping tool. Not easy since the California Branch does not even answer emails and the European branch is in the UK. So nowadays outside

14 days and 10 Jerry Cans should be more than plenty but I agree bladder should be fine. If you’re really concerned fill it with 10 gallons and move shake and squish vigorously then dump you should

Last year I received this sketch from Amel SAV. -- Jose Prieto SV Wayag, SM 323 Currently Alicante, Spain

Thanks to all for your advice, I have asked my boat sitter to trip them. Cheers, Paul S/Y Ya Fohi - Amel 54 #98 - Grenada

We refit ours. Easy and cheap. They look good. Victor SM314 Alendoy

I’d have to guess cleaning would not be necessary. The problems emanate from moist air getting in the tank. I imagine your bladder isn’t vented, and flattens as it empties? If so, there isn’t a

Many/most of us have a COVID related "change of plans" story, but ours included 28 days nonstop Panama to Nuku Hiva, 8 days in Nuku, then 14 days Nuku to Hawaii. We had been Caribbean based our first

Jérémy, I'll second Bill R.'s opinion, that TF Marine pump is top notch. Very expensive, and lasts forever. Replacing the original pump is usually done because fo the difficulty in parts sourcing.

Paul, This happened to me during my first winter storage. It wasn't flat batteries, and I couldn't put my finger on exactly what caused it. The boatyard reported some electrical storm activity around

Hi Jeremy, I replaced the fresh water pump on SM384 with this Sure-Flow pump 9 years ago and it has performed flawlessly. It automatically varies its speed depending on demand, and pumps up to 5

Hi Matti. See the photos attached. The clamping system mirrors Amels main mast stay attachments. It is important to put the tibe over the mizzen boom for head room. There is no need at all to fix it

thanks this is the one needed. Best regards Jarek NOA BLUE

Bill, thank you this is what I need! Best regards Jarek NOA BLUE

Definitely Boxtron unit have them press the breakers for the head sail then stay sail one will stop the beeping I now leave them both off while away from the boat Cheers Courtney Trippin 51 #101 St

Out of curiosity, is the MDKAL a predecessor or a newer version of the MDKD series? Many thanks. Jean-Pierre Germain, Eleuthera,SM007, NZ