Just wanted to circle back on my experience since starting this thread. We installed a Shurflo Aqua King II 4 gpm variable pressure (up to 55 PSI/3.8 bar) self-priming diaphragm type pump. No need for

Thanks for the photos Bill. Wishing you a safe passage Michael Nebo

Had to laugh at this! Exactly what we did last summer, Ken. The Erie Canal is 2 to 3 meters deep for most of its 310 mile length. If you wish to transit it in the same month, you run 6-7 knots!

Since I bought the Recmar wrinkle band plastic hooks (heard the metal ones can break the plastic holder plus need to be re-bent) for the window curtains that Karen mentioned from Curtain-Tracks, I

Dennis, I will put you in touch. He is arriving in Hawaii today. Bill CW Bill Rouse Amel Owners Yacht School +1 832-380-4970 | brouse@... Address: 720 Winnie, Galveston Island, Texas 77550

Hi Bill, I don't want to give up my helm seat but I don't plan on using it for a couple of months still. I could ship it to your client to use as a form to have a shop build him one if I'm sure to get

On Sun, Feb 28, 2021 at 08:51 PM, Craig Briggs wrote: Hey Arno, Perhaps on the 54 but not on earlier SM's, SN's etc. Do you also have an engine air intake filter? Not on the earlier models. Maybe

The original outside helm seat is what he is looking for. CW

Hi Daniel, Over time thedecks can look quite ugly. I think this is true with every brand of boat. Someowners try to keep the original look. Others have taken a different turn. I don’tthis there

The outside saddle?> or the inside "bar stool" Aras -- Aras Grinius

I have a client looking for an original Maramu Helm Seat. Let me know. Bill

I use a remote control for the winch of the mainsail at the mizzen to lift my dinghy/outbordmotor on the deck if I am alone. Works great and easy to install. Bypass the switch with the DC relay moment

Thanks for the info. Best regards. Denis

Awesome, thanks Gary. I pulled the sensor out today and took a bunch of measurements and have a local shop sending a unit to me over night. If it fits, I will post what I used. If it does not, then

Hi Richard, welcome to the group! There is a subgroup in this forum where owners can post their yachts for sale. I can't imagine selling Kristy and not notifying the group first. If you are in the

I was able to replace the track sliders with the following from Amazon. DMSE Wholesale Ball Head Carrier Curtain Carriers Glides Sliders Slide, and Rollers (56

Hi Arlo, I had the fuel sensor on our Super Maramu replaced while I was in Greece. Wema built a custom unit for us out of the UK and sent it to us. The price was quite reasonable for a custom

The A55 comes standard with a remote for the mizzen since it is difficult to see the sail from the wheel if the hardtop is fully extended. I’m not at the boat but I believe it is a Telecontrol t

Denis, what kind of furler do you have for your genoa? -- John Bernard "JB" Duler San Francisco Meltem # 19, Western Med

Lipseals in the given dimensions and fitted with a stainless steel spring are standard industrial stuff which should be available more or less everywhere. Important is to grease them properly. We