Hi Bill, From whom did you get the material and labor? Fair Winds Eric Kimberlite Amel Super Maramu #376

Hi Paolo, I had a removable forestay made. It sits about 2 1/2 feet forward of the bow. It is only 3 feet long in total. I has a Harken swivel block on the end and mounts in about a minute . I store

While $200 is definitely worth it and cutting and drilling acrylic sheet, perspex or plexiglas is a bit nerve wracking, it is quite easy to do yourself without special tools. The secret is to go slow

Including all material, all labor, and including routing for a gasket and new gasket on the port side windshield, and including painting a 30mm stripe around 3 of the 4, will be around 1000 euro,

Is there a reseason why you do not simply use the center roller, taking the tack line under the roller, and forgetting about the line fairlead? Bill

I tried to replace my forward and side acrylic windows and was quoted $1400.00 US for the material and $600.00 to install them I checked St Thomas and the 10mm acrylic price was $280.00 US and

Hallo, Based on the answers of this tread and the Amel official manuel, here the 2 solutions i figured out. I will try both of them when we can sail again. solution 1 (roll for second

Slavko, I removed mine probably ten years ago to send it out to have it coated by Color Wheels ,a vinyl coating that has held up very well and still looks new. As to getting the wheel off, it took a

Hi all, Hope to be on board tomorrow and make some photos. Also , I am trying to trace back all the pictures taken during my discussions with the rigger as this has been a long story, everybody trying

Thank you, Eric

Alex! last year we bought a "Code 3" on a facnor furler all supplied by Incidence sails. It was no issue at all to use it, I attached a halyard at the top of the mast and just hoist it. We got it at

Hi Eloi, The bottom one links the mizzen lifting line with the metal ‘D’ fitting at the end of the boarding ladder to support it above the level of the dock. Very best wishes Mike &

This may help you, especially if you have an AutoProp and AutoProp puller.

Look like things used to lift the dingy out of the water at night using a halyard Cheers Courtney svTrippin

Hallo, does anybody know what these items are for ? (not the tape measure :-) ) The long one is a double sandow. regards, Eloi SM2K 426 Red Lion

Hi All, Sorry, I don't have any pictures. I haven't been on Elyse since March 2020. We don't have a furler for our asymetrical spinnaker, we have a hoop and sock for dousing it. The whole assembly

Thanks Ken, sharing is knowing. Danny

Hello, is there easy way to remove the steering wheel on SM. I have removed the part with Henry Amel signature, and removed the screw. From here I do not know as the wheel is firm in place. I do not

Thanks Miles. Good toknow. It doesn’t surprise me that it is less than the Jackline policy.I recently shopped insurance and found Jackline to be the absolute highest rates.They were about 30%

Alan I would like to see some pictures as well please - especially how you connected the furler at the top of the mast if you have that? This is interesting to me as I have looked into doing this