...perfect Mark ! I had some doubts, with your pics all clear ;-)) many thanks Giovanni

Hi Thomas Any chance you changed the polarity of the wiring when you swapped the macerator? I have had a (non-Amel) experience where this happened and the macerator did work but very

Giovanni, In the USA, this is a very common home plumbing pipe that can be found in pretty much every hardware store anywhere in the country. You can also get it on online on Amazon and eBay and

Many thanks to Joel, Ann-Sofie and Paul, and also those of you who have contacted us privately, for your comments. They have been very helpful. Kind regards Julia

Thomas, A few more ideas: Maybe the vent is blocked at the deck cap. You can eliminate this possibility by opening the cap to see if there is any difference. And, did you check the voltage at the

Il 19/04/2021 12:52, Mark McGovern ha scritto:

Giovanni, I just repacked my rudder stuffing box and found that the same piece of PVC pipe that I use to seat the C-Drive seals works well to help seat the packing material in the stuffing box. I

That's a fantastic deal and far less than what I paid for my Victron batteries. If mine ever die I might consider this manufacturer after some more research. A few things I paid attention to when

Guys, I just finished getting this part made at a local machine shop. I brought him the sample you see in this picture Bill attached (that was a picture I took). So the machine shop took my sample,

Tom, A couple ofafter thoughts: Is the chopperplate and the centrifugal impeller securely fastened to the motor shaft and notworn? And, is the macerator housing oriented correctly? There is

Sorry for the incomplete info. The toilet doesn't empty rapidly into the holding tank. The discharge port, joker valve, macerator motor, hoses are all new. The copper pipe going up into the tank is

Tom, Welcome to FP. Can youclarify, please. Is it the water coming in, or the water going out? I assume byremoving motors etc. you are having trouble with the water leaving. If so, haveyou

30 Danny

29 seconds is the key to a trouble free future Jean-Pierre Germain, Eleuthera, SM 007

 Power drill with a 9’ length of 10mm rigging wire took two weeks of rotor rooting but now every flush is a delight 🤣. Now I flush 29 seconds every time Cheers Courtney Trippin 54#101

did you replace this: CW Bill Rouse Amel

I noticed after our 17 day rather rough ride between Oahu and FP that my aft head flushes very slowly. OK, no big problem (not my first rodeo), so change the hoses (clogged), use my drill driven auger

John, I replaced the start battery about 2 months after I bought the boat, so about March 2017. It was a GEL start battery, and will probably replace it this year. But, it is still working now. I

Perfect, Eric thanks!

That type of bed is not on the Super Maramu, but on the 54. Regrds Ann-Sofie S/Y Lady Annila, SM 232, 1998 Skickat från min iPhone