Hi Herbert and others, Just remember that everything you do to the shaft coming out of the C drive you are doing to the C drive. The shaft goes through a lip seal to a bearing to bevel gears. Every

Hello All, I have uploaded a video, and think it has a lot of useful information. Just got back to Aquarius, had to do the 10 day quarantine to get back into Thailand, but the Thai Government jjust

Hi Eric Thanks a lot for your information. I’m currently working on it by pushing with your concept and at the same time pulling with a puller on the other side. But still very tough job. I

Sorry the word is DISK

I forgot to mention, I just replaced my engine with the new model of the 4JH3 with a 4jh4. The disk came off easily after having it machined 4 years ago. Fair Winds Eric Kimberlite Amel Super

Hi Ruedi, Yes, you must cut the existing bolts. You use threaded rod and nylocks to replace the bolts. When you have the disk off , have a machine shop cut a few thousands of an inch off the

Herbert Well done! Mine took me a few hours too. I used a chisel and hammer after soaking in Corrosion X (on the advice of Craig). Heating with a blow torch was the secret. I used the tool, but the

Hi Ruedi, heating, spraying, puller, nothing worked. I remember it took 5 hours using a heavy hammer and a piece of wood: tapping, hammering, then brute force ... fair winds, herbert SN 120 KALI MERA

Hi Amelias and Eric I tried to remove the Vetus coupling from the shaft and I was not able to remove it even not with a strong puller and heat. Maybe someone out there has another great Idea?

Craig, I hope you received my email. Fair Winds Eric Kimberlite Amel Super Maramu #376

Hello David, Aquarius had these hatch protectors on the aft lazaret when I bought Aquarius, but then I put some similar protectors on all the lazarets. Several photos to look at. I had them made in

Hi Eric, We're headed to eastern LI - could you send me contact info for your A/C /Espar genius, please? May need some assistance reinstalling & diagnosing mine. You can pm to sangaris at aol dot

Good morning Carina, Long time since we net in St Lucia! Were the two webasto heaters installed when you bought your 54 or did you fit them? Can you send me a photograph of what they look like? I

Hi Alexander, We just lived our second winter on the boat in Sweden, without any major problems. We have two webasto heaters, one just for the after cabin and one for the rest of the boat. We do

Hi Billy, I have an air conditioning genius that works here on eastern Long Island . He also installs Espar heaters. He is installing one on my friend’s 54 as I write. Where are you located? Climma

Normally, meaning before COVID, you could get a good answer regarding who to use from either info@... or customerservice@... Bill

My climma did cool the boat on delivery in June and wouldn't heat it in the winter and now won't cool it today. Does anyone know someone in the new york area (ish) who can work on these. The yard I'm

Alexander, We've cruised the Mediterranean, Caribbean and the Baltic and Scotland in our Santorin. We live in North Wales where we keep the boat at present. The Eberspacher keeps the boat warm enough

Hi Alexander, We spent three seasons in Chile, including two based in the Beagle channel. We didn't find problems with the cold or condensation. What proved useful were: The curtain in the cockpit A

Wrong this time. Heat exchanger had to be cleaned. Few hours of cleaning and now the temperatures are 73dC and 23dC. Sea water temperature is 15dC. Thank you all for help. -- Slavko SM 2000 #279