Amen Arno. Awesome Bill. Thank you!! Porter McRoberts S/V IBIS A54-152WhatsApp:+1 754 265 2206 Www.fouribis.net

John, That would be the short poles, right? CW Bill Rouse

Annie's poles were reported to be shortened by original owner because the insurance company did not like them protruding past the rails. I never measured them but they work fine. John Clark Annie SM

Nick, It is hard to believe that an internet site anywhere fails to register the dns "www.website.fr" as well as the "website.fr" http://www.sparcraft.fr works but http://sparcraft.fr does not. The

Hi Scott; Thanks for the information. We have a system of supporting the tender and the outboard on the Davits that has also has been proven. Our only concern, at this point, is the fit on the

We have the CL310 hypalon. It's a choice between two lesser evils. The 310 fits on the aft deck just perfectly for passages. I have it sit bow aft and the transom near the mizzen mast. Because we do

I have the Highfield CL310 Hypalon and the Simpson davits. After breaking a few of the lifting lines, here's what we do: - Replaced the stainless lines with dyneema. Didn't pay Simpson the 4000 GBP or

Dan, I know of no such recommendation. I know that 1 SM owner (Hull before 200) says that he shortened his poles by 57.5 cm. to match the length of a SM2k. I am not sure that this statement from him

Bill, So is there a recommendation to shorten a long pole to be the shorter length for better storage and functionality? Thanks, Dan Feierabend SM #86

Good question Geoff, We have not observed any impact, however, we've primarily used it at anchor, and only underway under very benign conditions as it is not secure. Although it seems to gimbal on the

If no one is going to do it I’ll do it for the community: Thanks (again) Bill for putting in all this effort to make our Amels better en more reliable. Much appreciated! Regards, Arno Luijten SV

Sparecraft doesnt show the ball and socket style in their catalog, however they show a cylindrical style with a socket- it seems to me that if one were to buy these- replacing both the joining ends

Dan. May I ask please whether your Induction Cooktop has any adverse effect on your main compass or your autopilot when you are cooking on it?

Hello, It in fact http://www.sparcraft.fr All the best, Jean Boucharlat Formerly SM 232

Hello Bill You might want to check the web site address (typo error ?) ,”spacecraft.fr” doesn’t exist but “sparecraft.fr” is still in activity but no sign of the poll ends there.... Kindest

Hello Ian I like the idea of an electric blanquet , is yours AC or DC ? Nick -- Nicolas Klene DarNico SM2K # 471 In Marseille

Jose, we purchased a Tefal IH2108 in Martinique. We can set it on the dishwasher, counter or on top of a curting board in the stove top. Nothing special about it. We just wanted something to try. It

Hi Daniel Did you mount it on top of the gas stove or did you replace it like delos did? What brand and model? Thanks José Gabriel Venegas Ipanema SM2k 278

It is 467cm on Bonne Anse. End to end. The long pole. - Slavko SM 2000 #279 Bonne Anse in Portoroz

With you on that Ken. Danny SM 299 Ocean Pearl