main@AmelYachtOwners.groups.io

solar panel

Hi, I am upgrading my solar panels on the arch. I am hesitating between the SunPower Maxeon 3 400W and the TrinaSolar Vertex S 400W (similar size and power, but huge price difference). Does anybody

By Eloi Bamberg · #58074 ·

Re: Eno 4 burner Stove grate and standoffs

Hi Giovanni, As in the drawing, the square section is 20x20x20mm The U shaped slot is 8mm across, 12mm down The tube is 8mm long I tried to take a photo but it didn't work well. Trust this is

By Alan Leslie · #58073 ·

Re: Amel 54 Secondary Saltwater Manifold made by SOFOMARIN of welded polypropylene pipe

yes please send photos of completed manifold installed - please. Peter Forbes Carango Amel 54 #035 La Rochelle 00447836 209730

By Peter Forbes · #58072 ·

Re: Amel 54 Secondary Saltwater Manifold made by SOFOMARIN of welded polypropylene pipe

Martin, I have just email Laura at SOFOMARIN to ask here specifically the changes made in your version.

By CW Bill Rouse · #58071 ·

Re: Amel 54 Secondary Saltwater Manifold made by SOFOMARIN of welded polypropylene pipe

Hello Bill, hello to all interested in the manifold for a 54 by coincidence we spent some weeks in La Rochelle. I decided to order the manifold in the Sofomarine shop directly. Taking this opportunity

By Martin Birkhoff · #58070 ·

Re: Washing machine does not turn on

There is an access panel in the port berth. Washer Access Panel in the Port Berth facing forward – upper right. This wood panel has two screws securing it. You will find water and electrical

By CW Bill Rouse · #58069 ·

Washing machine does not turn on

Hi everyone; We’re back on board after 1-1/2 years. Many minor issues resolved. The washing machine does not power on at all, when the 220V breaker is turned on. Is there a fuse or any other

By Mohammad Shirloo · #58068 ·

Re: Eno 4 burner Stove grate and standoffs

Il 22/09/2020 05:53, Alan Leslie ha scritto:

By Giovanni TESTA · #58067 ·

Re: Passageway berth wall fabric cleaning advice

Thank you for the advice and tips on cleaning the fabric. I started first with a 50/50 mix of vinegar applying with a spray bottle. Using a soft brush, I worked it in to the fabric. I then let it set

By Paul · #58066 ·

Re: Furler motor to gearbox sm2000

Hi Woody, are you still seeking the motor brushes for the LS MBT86M motor? I have ordered my "Brushes .31" x .39" x .7" BRUSH SPR-A007" from

By Michael & Robyn · #58065 ·

Re: Depth sensor reading bad values after power cycling

Billy, I said, Speed, but I meant the B&G Depth. The receiver of the DST200 has a very wide range of frequency reception whereas the DST210 is much narrower. I am thinking you were the victim of

By CW Bill Rouse · #58064 ·

Re: Depth sensor reading bad values after power cycling

Billy, from recollection it is a DST200. I have not experienced any problems with that transducer (Bill, this is the depth, not the speed transducer). But the man who would know is Stephane

By Joerg Esdorn · #58063 ·

Re: SM 2K hull, boot stripe, and rub rail colors

The Super Maramu Red Line and the Amel 54 (except for the last 54s produced) have a rub rail and waterline stripe of RAL 3003 Ruby Red. I do not have the color of the brown rub rail used on most

By CW Bill Rouse · #58062 ·

Re: Rudder moving when anchored - Hy-Drive steering

Thanks Bill, you answered my question. I have a hydraulic leak and this explains the rudder moving.

By Michael Brusch · #58061 ·

Re: SM 2K hull, boot stripe, and rub rail colors

Hi Kent, Iris, Mine is a SM Red Line. I have an old note (possibly I took it at Hiėres years ago) that the color code for the rub rail is RAL 3003. I cannot swear on it but I suggest you check it

By PAOLO CUNEO · #58060 ·

Re: Depth sensor reading bad values after power cycling

Billy, I assume that you have a sonic speed transducer, rather than a paddle wheel. I have experienced an erratic reading caused when the frequency of something nearby was at the same frequency as the

By CW Bill Rouse · #58059 ·

Re: Depth sensor reading bad values after power cycling

It started working again today. Debris on the transducer?

By Billy Newport · #58058 ·

Re: Rudder moving when anchored - Hy-Drive steering

Michael, With hydraulic steering, there is usually no way to stop the problem you are experiencing. Since there is not a "solid" connection from rudder to wheel, even the tiniest amount of leakage of

By Bill Kinney · #58057 ·

Re: Steering wheel removal

Eric, More than you wanted to know: There are two threaded holes 8mm on either side of the axis. Use the AutoProp Puller and modify it by drilling two 9mm holes spaced 48mm - 63mm apart (it varies).

By CW Bill Rouse · #58056 ·

Re: Furler motor to gearbox sm2000

Hi Alan, I have the same question; can you cc me when you reply Heinz. Best Regards Teun SV AMELIT A54 #128 I am in USA AMELIT is in Storage on the hard in COOMERA (near BRISBANE) QLD

By Teun BAAS · #58055 ·

Messages