WOW! Awesome! Thanks for sharing. With best regards, Mark Skipper Sailing Vessel - Cream Puff - SM2K - #275 Currently cruising - Tahiti, French Polynesia www.creampuff.us

He is the fellow who rebuilt my starter motor.

Impressive, I'm guessing he's not local. -- Jason Rutledge SV Liahona SM 335

https://youtu.be/x5Gn8oREkFc Fair Winds Eric Kimberlite Amel Super Maramu #376

I am sorry to report that Mark Fruehauf , from Balcen Watermakers in Maine has passed away. He was one of three companies that repaired and had parts for the Dessalator watermaker. I always found

Why don’t you try a starter motor alternator rebuilding company ? I just had a motor rebuilt here on Long Island last week. Fair Winds Eric Kimberlite Amel Super Maramu #376

I thought they were made by Goiot hatch company. They hold open the hatch in the galley and the aft head and cabin. Fair Winds Eric Kimberlite Amel Super Maramu #376

You may need a new one of these. Photo is of the last generation. There might be one at SAV@.... If not contact me at brouse@...

Thanks. Unfortunately some (at least one) seams to have sheared of and is stuck in the bottom and I can’t fit a screw extractor through the access hole…

Bill, this is it!!!!!!!!!!! You are a magician. I’ll call them ASAP. Thank you again, JB -- John Bernard "JB" Duler San Francisco Meltem # 19, Western Med

JB, Your Yanmar was not original to your boat. This damper plate was probably selected at the time your boat was repowered. I believe what you show in the photo is a Centa Marine Damper Plate. Try

I recently purchased (past March) a spare starter for my 1985 mango with the 4.236 engine. Give Jeff Beard a call, he is with perkinspower/ tradewindspower out of Miami. His number is 305-592-9745

Hello, I need help sourcing an elastic coupling for a Yanmar engine. Would any of you know a good dealer in France, UK or the US? I have been stuck in Empuriabrava since early May because of the lousy

Andre, unless your starter has been severely overheated (or on fire), or has had a structural failure, almost any starter can be rebuilt to better than new status. I would investigate all the

Hello, Andre i had a Perkins in our Old Boat until 5 years ago The parts supply was good if you want to ask me here in Germany I can try to ask the supplier i need the engine number built for

To all fellow Amelians I have a 1988 Mango with a 4-236 Perkins engine with 13000 hours. Engine runs great, no smoke and good oil analysis. Unfortunately the engine starter has failed. I’m in a busy

Hi Matt, We have paid a lot of attention to our consumption habits over our years of cruising and we went with 2 @ 385w LG panels as we did not want to increase the size on the back arch. We still

Having Lady Annila on the hard just a few minutes drive from the appartment has resulted in a far more extended renovation of the boat during winter moths, summer we have been able to sail along the

When COVID hit in spring of 2020 we were in Ile de Saintes (Caribbean). We spent an idyllic two months.locked down there with a great small community of cruisers. Then with all of the southern islands

In my first recharge, it lasted 24 hours and was empty. My second recharge used a leakseal and now it lasted 7 days. I filled it again with another leak seal and it was working for a week when a tech