|
Re: Primary Rawater Manafold
It screws into an Amel-made elbow on an Amel-modified Vetus sea chest. I am not sure, but the threads on the non-modified Vetus sea chest without the Amel-made elbow are 2" BPT
It screws into an Amel-made elbow on an Amel-modified Vetus sea chest. I am not sure, but the threads on the non-modified Vetus sea chest without the Amel-made elbow are 2" BPT
|
By
CW Bill Rouse
·
#59598
·
|
|
Re: Where to buy Corrosion X
I had a can in my checked in luggage leaving Grenada after delivering a boat from Europe.. got it confiscated. so annoyed!
I had a can in my checked in luggage leaving Grenada after delivering a boat from Europe.. got it confiscated. so annoyed!
|
By
James
·
#59597
·
|
|
Re: #attackedbywhales #newboat WE SOLD THE BOAT! Now what??? Sailing Ocean F...
#attackedbywhales
#newboat
Hello Stefan,
of course we reported the encounter with the orcas to orcasibericas.com.
From my point of view it is interesting to collect as much information as possible about comparable orca
Hello Stefan,
of course we reported the encounter with the orcas to orcasibericas.com.
From my point of view it is interesting to collect as much information as possible about comparable orca
|
By
Martin Birkhoff
·
#59596
·
|
|
Re: Primary Rawater Manafold
Bumping this to see if anyone know those thread sizes?
Bumping this to see if anyone know those thread sizes?
|
By
Chris Doucette
·
#59595
·
|
|
Re: Wind generators
Lovely turn of phase Nick. Don't we all covet the wind. Great conversation.
Matt
Lovely turn of phase Nick. Don't we all covet the wind. Great conversation.
Matt
|
By
Matt & Michelle
·
#59594
·
|
|
Re: Wind generators
So it looks like the Superwind from Germany is the best bet, but my mount will need some adjusting.
Just checked out Sunpower 400W solar panels. I have to admit that from a cost benefit analysis there
So it looks like the Superwind from Germany is the best bet, but my mount will need some adjusting.
Just checked out Sunpower 400W solar panels. I have to admit that from a cost benefit analysis there
|
By
Nick Newington
·
#59593
·
|
|
Re: Wind generators
The previous owner installed a D400. The machine itself is great and smooth.
But...
1) the whole boat vibrates above 20 knots. I since found that 2 out of 4 nuts were missing with no washers (mediocre
The previous owner installed a D400. The machine itself is great and smooth.
But...
1) the whole boat vibrates above 20 knots. I since found that 2 out of 4 nuts were missing with no washers (mediocre
|
By
JB Duler
·
#59592
·
|
|
Re: VOLVO TMD22 Ext Reg Alternator
Paul,
Thank you for the insight. I was not sure if you could modify the Valeo A14N118M alternator to install the external regulator. That is a great option given the ready availability of the
Paul,
Thank you for the insight. I was not sure if you could modify the Valeo A14N118M alternator to install the external regulator. That is a great option given the ready availability of the
|
By
Matt & Michelle
·
#59591
·
|
|
Re: VOLVO TMD22 Ext Reg Alternator
We did not replaced the original alternator, but installed a Balmar external regulator, very pleased with that, increased the out put, A few years back we were looking at the Victron alternator of 125
We did not replaced the original alternator, but installed a Balmar external regulator, very pleased with that, increased the out put, A few years back we were looking at the Victron alternator of 125
|
By
Paul Osterberg
·
#59590
·
|
|
Re: Wind generators
I installed a silent wind generator about four years ago and have never been happy with it. The output is minimal and it is anything but silent! At the same time I put on Solara panels and have been
I installed a silent wind generator about four years ago and have never been happy with it. The output is minimal and it is anything but silent! At the same time I put on Solara panels and have been
|
By
Ron Hynes
·
#59589
·
|
|
Re: Wind generators
Wind - I always recommend solar.
I tried for years to get real-life data on any wind generator and found no actual useable data to construct a cost/benefit model. Sure I got the reports like, "one
Wind - I always recommend solar.
I tried for years to get real-life data on any wind generator and found no actual useable data to construct a cost/benefit model. Sure I got the reports like, "one
|
By
CW Bill Rouse
·
#59588
·
|
|
Re: Wind generators
Do not now about wind, but this year we replaced our 5 year old solar panels and replaced the with Sunpower maxium 3. 2x400 w is just a fraction larger surface that the old 3x150 w, A hug
Do not now about wind, but this year we replaced our 5 year old solar panels and replaced the with Sunpower maxium 3. 2x400 w is just a fraction larger surface that the old 3x150 w, A hug
|
By
Paul Osterberg
·
#59587
·
|
|
Re: Where to buy Corrosion X
Many thanks everyone!
Joerg Esdorn
A55 #53 Kincsem
Currently in La Rochelle
Many thanks everyone!
Joerg Esdorn
A55 #53 Kincsem
Currently in La Rochelle
|
By
Joerg Esdorn
·
#59586
·
|
|
Re: Wind generators
Another vote for Superwind. I have had one half way up the mizzen mast since 2018. it is totally quiet, transmits no vibrations to the mast thanks to the plastic decoupler and withstood the 2018
Another vote for Superwind. I have had one half way up the mizzen mast since 2018. it is totally quiet, transmits no vibrations to the mast thanks to the plastic decoupler and withstood the 2018
|
By
Joerg Esdorn
·
#59584
·
|
|
Re: Wind generators
I cannot comment on the wind generators due to lack of experience. I am looking forward to what the group says.
For the solar panels, be careful focusing too much on the advertised wattage output.
I cannot comment on the wind generators due to lack of experience. I am looking forward to what the group says.
For the solar panels, be careful focusing too much on the advertised wattage output.
|
By
Matt & Michelle
·
#59583
·
|
|
Re: Wind generators
He Nick
i think superwind are the best.
have you ever thought about a hydrogenerator?
Elja Röllinghoff
SM Balu
222
Von meinem iPhone gesendet
He Nick
i think superwind are the best.
have you ever thought about a hydrogenerator?
Elja Röllinghoff
SM Balu
222
Von meinem iPhone gesendet
|
By
Elja Röllinghoff Balu SM 222 <Bijorka@...>
·
#59582
·
|
|
Re: Wind generators
One wind generator to consider is Superwind- German made.
One key advantage is that the blades feather when the wind is high or gusting. The assists the brake and spills wind easily. It is also less
One wind generator to consider is Superwind- German made.
One key advantage is that the blades feather when the wind is high or gusting. The assists the brake and spills wind easily. It is also less
|
By
Ross Hickey & Donna Hammond
·
#59581
·
|
|
Re: Wind generators
Nick,
You should consider the Superwind 350 or 353, which is in my opinion the best wind generator on the market.
The 353 has new features in case of very strong wind.
I will have one soon on my
Nick,
You should consider the Superwind 350 or 353, which is in my opinion the best wind generator on the market.
The 353 has new features in case of very strong wind.
I will have one soon on my
|
By
Alain Durante <info@...>
·
#59580
·
|
|
Wind generators
I thought I would consult the group. A fountain of knowledge for sure.
My recent sailing included some windy conditions in the Cyclades with gusts in excess of 60kn.
My Rutland 1200 wind generators
I thought I would consult the group. A fountain of knowledge for sure.
My recent sailing included some windy conditions in the Cyclades with gusts in excess of 60kn.
My Rutland 1200 wind generators
|
By
Nick Newington
·
#59579
·
|
|
Re: Simpson Davits Remote Control Pairing
No success this morning. I go through all of the necessary steps indicated in the manual, the lights flash as expected on each step ... except the last step which is confirmation that the code is
No success this morning. I go through all of the necessary steps indicated in the manual, the lights flash as expected on each step ... except the last step which is confirmation that the code is
|
By
Dean Gillies
·
#59578
·
Edited
|