I have Tengah in a LLC. Only issue in the last 30+ countries was in Montenegro. They refused entry unless we had a letter from the LLC giving me permission to operate the vessel. We wrote one and

Amel started connecting rigging to bonding with the 2009 A54s. My 2007 A54 did not have bonding and rigging connected until I installed a new VHF antenna as the braided shield on the coax is

Paul: Third reason - if my starter battery dies, I can easily substitute one of my lithium batteries to start the 12v motor. Dominique: How did you wire the BP-200? Were you able to find a wire that

We left the boat for 4 months earlier this year and while I have a Victron based system, I think you can achieve the same on MV: I left one fridge on (brushless pump, so pump life is less of a

Hey Drew, we spent the summer in Cogolin close to Hyers and had a really nice experience with Guillaume from APY yachting ( guillaume@... ) and would highly recommend him. Best regards, Paul

Bonjour Drew, I also ordered directly from ACMO and asked Russo Yachting. They did a great job, very professional. You can call the owner Mr Duthoit at 0685340549 They are based in La

Hello Drew I know Seanergie un Hyeres . I will have my forestay replaced soon. I have selected Seanergie to Di the job. Regards Alain SM 146/Koriolys Gruissan / France Envoyé de mon iPhone

Does anyone have any experience/recommendations with getting an Amel SM2K re-rigged in either Antibes or Hyeres? I've ordered the rigging from ACMO but don't have a rigger. We're hoping to get this

Bill, I ordered a new 70" hose and SS. fittings from the link you sent me. Approx. $125 with shipping. Thanks, Pat

Pat, Zinc plated??? From

Ron, Thank You, but I just ordered a new hose from the company that Bill sent me a link to. They are in Philadelphia , maybe 75 miles and they will ship it. The more local outfit wanted $80 per

Pat, if I recall you’re on the East Coast of the US, correct? If so try a company by the strange name of Collilower. They have over 30 branches from New York down to Florida I believe. A few months

Bill, The two I have dealt with ,did not carry them in stock and I don't think they wanted to bother ordering them in for one small job, I will see if I provide the part ,they will crimp it on. Thanks

Any hydraulic hose fabricator (heavy equipment) may have them. My experience is at least half have the fittings in stainless steel. Maybe you buy the fittings and have the shop do the crimp-on.

Bill & Bill, Thanks for explaining the numbers and their meaning. I really could not understand how the prefilters could be "special" , according to the dealer,thus the reason I asked my team of

Pat, I can assure you that there is nothing at all "special" about the prefilters used for a watermater. A 5 micron rated filter will do fine. If you have dual filter housings in series, a 20 or 25

The 160 takes 2 each SW30-2540. SW = Saltwater 30 = Type 25 = 2.5" diameter 40 = 40" long Best, CW Bill Rouse Amel Owners Yacht School +1 832-380-4970 | brouse@... 720 Winnie, Galveston Island, Texas

Dear Bill Great deal. I may need to replace my genoa un a near future. Thank for all advices Best regards Alain SM 146 Koriolys Gruissan / France Envoyé de mon iPhone

Germain, They are about $20/each cheaper ,they also suggest membranes made by AMI in the US ,that are about $75./each cheaper, $183. and is a direct replacement for Filmtec SW 30-2540. Thanks, Pat SM

Pat, I use Water Anywhere for my Filmtec membranes Much cheaper… Jean-Pierre Germain, SM007, New Zealand