Hi All, Has anyone used the Volvo impellor removal tool? I want to get one but FYBMarine in the UK list it as being for impellor p/n 21951352 whereas my impellor is 22307636, although it does have

We all have our own technique for dealing with the bilge. We clean every dish with paper towels before washing up, going through countless rolls of paper every season. Then I put 150 g of

😩 Verstuurd vanaf mijn iPad

I also need to replace the rudder packing on my Mango. Any fellow Mango owners that know what size they used?

Oh, and by the way, the moon loved it so much he came out especially to have a peek ! -- ian and judy jenkins penazen@...

Guys 'n Gals, Here are some more pics of our hard top. What they may not do justice to is the really neat rope bolt track all round the hard top, just in from the edge. You hardly know it's

NAPA Auto Parts in the USA sells a 5 gallon pail for about $75 US. That's about the same price as buying 9-10 liters/quarts. Best regards, Daniel Carlson on sv BeBe, SM #387.

Paul, The packing can be really tough to pull out, but with the right tool it can come out. A purpose made packing extractor is the best tool. like this: https://amzn.to/3BZQhAF Use the largest size

There is far better now as the Doradus 5.1 . Antenna on spreaders of the mizzen mast and internal antenna in the galley Envoyé de mon iPhone

Hi, do you have some pictures of how and where Amels places the pepwave and the antennas? Thanks! Joan Amel 55#05

Hi Drew, Thank you for your advise. Well appreciated. Will work with that, especially the preparation of the watermaker and the A/C units was good to know. Eric Opdeweegh sv Abayomi SM 158 currently

Hi Warren, we installed the Raymarine Evolution 200 autopilot together with the Jefa DD 1 drive unit. The Evolution unit box is located near to the Jefa drive in the aft (see picture). The heading

We had sub-0 temps wintering over in Norfolk VA and Holland. Drinking water lines and tank can be emptied, sea water lines can be filled with anti-freeze. The watermaker needs food-grade propylene

Hi Bob, Yes its 8mm. Here is a picture of used pieces that came out and new material. I replaced all last month when putting the rudder back on the boat. Cleaned then greased the internal cavity +

Hi Bob, Last time I did it....8 years ago ?? I used 5/16" which is pretty close to 8mm. I remember it was quite difficult to compress the three rings enough to get the nut to start. I eventually took

Eric , 9 litres does it for us . Ian

Hi Craig, Thank you. I thought it was around 2 gallons . Fair Winds Eric Kimberlite Amel Super Maramu #376

Hi Eric, The original plaque says 8 Liters of 15W-40 oil. Oliver informed us some years ago that 80-90 would be better, but Amel figured it would be easier to have to carry only one type of oil for

Eric, Bill R states in post #41551 that "the C-drive takes just under 9L of 80/90 gear oil". Greg

Hi Eric & Els, Sorry, but that order has long been completed. The supplier was TechnoRubber in Medley, Florida. You can Google them and they have the extrusion die. No plans to do another group