So I went to install the physical switch as mentioned above, however the purple and gray wires simply don’t exist on my FA50. Also, in the menu screen on the chart plotter, the “silent” option

Chris. I can call you and walk you through. Porter McRoberts A54-152 What’s app 754 265 2206

Hello, for Furuno FA-50 you need install additional switch which is Extra accessory. Bartek Czarciński

Hello All, Can someone explain to me how to go into “Silent Mode” on the Furuno FA50 so the AIS only receives and doesn’t transmit (Amel54 #133)? With the standard network setup I thought there

Slavko, I’m not 100% sure but as per photo you attached seems that Agua Signal lamps are same on SM and A54, but please check that. However I found on mizzen mast lamp number 526-156

Eric, You can try contacting the manufacturer directly at vend03@.... They are located in Italy.

Hi Mark, Any other ideas, they are out of stock. Fair Winds Eric Kimberlite Amel Super Maramu #376

Since we are on the subject of Bowthrusters, I would like to buy all necessary switch and sensor spares for our A54. Can someone please provide source and part numbers for purchase in the U.S.? We

Mark ordered them here:New Bow Thruster Sensors Part: FFV-807A6X or FFV-810C6X for a 54 from TSII (https://tsii-connectors.com/) Contact Thomas Shook <tsiiinc@...> Or, order from Amel:

Paul, The sensors can be found here: TSII INC https://tsii-connectors.com/ Tom Shook tsiiinc@... The part number is FFV-807A6X I paid $30 for each a few years ago. -- Mark McGovern SM #440

Thanks Bill. I have spoken to Mark and he thinks it is the PC Board. He is going to make one up for me. Alan - nice to hear from you. I do understand what you are saying, but 2 of my sensors are

There are a number of cleaning products on the market that will flush crustations , mussel shells, etc from your seawater cooling system. What none of them tell you is that well worn transmission heat

Bill, I don't know why I could not find that,I knew I saw a post recently on this subject. I will order it today, Thanks, Pat

I know they were the same at the beginning of production, but I do not know if they were the same throughout the 54 production.

It will take 90-100, order 100 Bill CW Bill Rouse

Pat, Mike Ondra is the one who found it. See this: Replacement for Weather Strip on SM.pdf

Hello, I also went through the process of getting rid of the moisture coming through the hatches. After doing the latches, I also found I was getting some moisture through the hinges, and so used

I hate to bring up an old thread ,but I have tried to find a source for a new door seal in the old posts and have been unable to find one. I am running out of time to order one ,so I thought I would

Hello Slavko, Ipanema was originally built for an American customer and, for that reason, AMEL added the white box outlets on the factory to allow the use of 110 V shore power via a transformer or the

Hi all, we had the same problems with all Southco-locks. Some of the O-rings were worn out, most of the pins were bent. It was a problem to get O-rings with the same specifications. Finally we used