Hi Thomas, I have the original standing rigging diagram for the Maramu 1986 with Nirvana mast. Hope this help!

Kevin, In addition to 220togo.com, that Mark quotes above, another source for 220V small appliances for boats based in 120V countries is amazon.co.uk Most things ship quickly to the USA, and they

Bruno, My Maramu has the Nirvana mast. Main lowers and inermediates are 8mm, caps are 10 mm. I was told by a reliable source that a Maramu has yet to lose a mast if that information needs to be

Kevin, We purchased this one: https://www.220togo.com/whirlpool_25_liter_microwave_with_grill_756 It fits the space almost perfectly and requires no modification to the shelf or mount in order to

Defo order an Amel 50, before they realise. Peter Carango Lymington -- Best wishes Peter Forbes +44 (0) 7836 209730 ppsforbes@...

Just received a parcel of spares from the wonderful Maud. Sent to our home in England and therefore no French VAT. More to the point, UK customs clearly have not yet heard that we have left the EU as

I’m looking to purchase a new 220 volt microwave that fits in our SM microwave cabinet (approx 23”x13.5”x15”). Has anyone replaced theirs here in the USA and if so which model fits in the

Hi Denis, You'll want 15% of breaking strength, which, of course, is dependent on the size of the stay. You can google it, or a tension meter usually has the reference numbers on it. Or just make

A simple question to the group. Does anyone have the correct tension for the standing rigging on a 54? Denis Elborn S/V Fortune 54-159 On the hard in Preveza

He all have a look here Good luck SM Balu 222 Elja

Hi Bill, Thanks!!! How I managed to send the email to you instead of Maud beats me…😂 All the best, Helen

Maud's email is SAV@... Bill CW Bill Rouse

Dear Maud, Hope you had a great summer. We are very happy with our new drive unit and thankyou for all your help! We have left the boat in a marina on the island of Samos and are using her as a

Contact Mike Haberlan via the means below. Vetus part #AFSTPB is an exact fit. It has been my experience that once the switch seal fails and the internals get wet, the switch itself is soon to follow

Hello Kevin and Mike, If I remember correctly this modification was performed by Amel to avoid having to install deck mounted foot switches. To preserve the integrity of those rubber caps Endo switch

Clearance between the switch bottoms and the electric motor is tight. Finding the right switches can be difficult. If your switches are still good, the rubber boot from any push button switch can be

Afternoon folks, Am looking to source some parts for a proper repair. Any leads? -- Kevin & Kristen Schmit KIANA SM #362 Brunswick, GA USA

Dear All, We left our boat in the water in Le Marin, Martinique for 20 months. When we returned she was as fresh and dry as the day we left her. No mold, no leaks. The trick is not to leave anything

Dean, The previous owners of Rita Kathryn did the same thing as Jose describes in this thread https://amelyachtowners.groups.io/g/main/message/61037 when leaving the boar in warm locations except they

I had a minor rudder shaft leak. I'm in the process of my annual haulout so I've addressed the rudder leak. I have an extended rudder packing area installed by Amel in Martinique. I carefully pulled