Dmitry, Do you have a deck stepped mast on a Super Maramu? Or some other Amel with a keel stepped mast? If your boat is deck stepped then you do not need the bolt. The purpose of the bolt is to

Eric, sounds like you mentioned some of the same issues I had on my Sharki as far as Category 1 requirements. I would love to hear back if you remember any other items. How do you know your boat does

What model and year Amel do You have? My Amel Super Maramu #376 Kimberlite is deck stepped and does not require what is referred to as a Bermuda bolt. Also on the Amel Super Maramu there are

Has anyone entered a ISAF Category 1 race with an Amel? There are some rules to which Amel may or may not be built. For example, there is an OSR 3.12 that states "The heel of a keel stepped mast shall

Hello All, Does know the actual weight of a Sharki fully loaded in cruising trim? Most brokers etc quote 9400kg displacement but I see on this site there is a Specification in French and German with

Hi John, I have a NASA navtex receiver on Crusader. It is their better model called a Plus I believe but as it's on the boat and I am not, that's a guess. It may be a Pro. Even though I mounted the

John, We have a navtex installed in our furuno weather fax. The antenna is the triadic stay. While cruising Europe I found that the navtex reception to be spotty, probably due to the skip of the

I have a Navtex engine which receives weather and Nav messages and stores them to download on my PC. It is sold by NASA, a British company which sells a wide range of low priced marine instruments. It

Hi Eric, Once a year - puller tool available at West Marine or other chandelry, - Note direction of blades - Install with vasaline if necessary. Peter

Assuming that you have a separate GPS antenna and the RL80C hsb2 Display gets its GPS information over a seatalk network, the problem is most likely with the GPS antenna. The most likely solution is

Hello Eric, A good trick for replacing an impeller is to squeeze it with a plastic cable tie so that it will go into it's housing and key wat easily. The housing should be greased and the impeller

Hello all Since a few days I do not receive a fix on my Fishfinder RL80C. Does anybody have an idea, what the reason could be? Thanks & best regards Paul Aebersold SM 324

Hi Jim Sorry I missed that. I should be in the office Monday. No problem. Good trip Walter & Fatima, SM # ........? ________________________________ To: amelyachtowners@... Sent:

Hi Eric With your question you raise a number of others, namely Which raw water pump is on your engine How old is it ( is it the original unit) When was it last serviced (seals replaced) Does it

Hi John, Thanks for your kind and thoughtful response to Susie's inquiry about the Amel. Like you, we are viewing the Amel as one of the best vessels available to meet our needs. And, how very odd

Walter, I am presently in Panama and will return this weekend---I will contact you Monday. Best Jim

Howdy Jim We live on the NW side of F.Worth by Eagle Mountain Lake. That is where my office is too, only three blocks away from home. A whole 120 second comute.  We need to get together sometime

Eric - Assuming you're talking about the raw water pump impeller and although you don't say how old the impeller is, I'd suggest you simply follow the maintenance interval recommendation in the

Dear Walter and Fatima, I live in Arlington Texas and presently have my boat in Bocas Del Toro Panama---I would be pleased to meet you some time to answer any questions regarding this great

any body have any advise about pulling and replacing the impellers on the volvo engine. 1. how often does one need to replace it and is there a special procedure/tool for replacing the impreller.