That logo is from goiot that makes hatches portholes etc….I know from having just bought a bunch 🤣. Not sure what the piece is, though. Christian ESCAPADES SM #350 Currently in HOLLYWOOD, FL

Maybe something for a seagull water filtration system due to the seagull on the knob

Hello all, well after 4 years of owning my Amel Mango I have not figures out what this part goes to. Any ideas? (BTW I already checked and it does not fit on the "Flux Capacitor")

For those interested. Furuno is offering to update FW for free on the FA-50 (probably for other impacted units which have a FW fix available). I know this isn't practical for a lot of folks but I

Good day Amel owners, Just one owners experience of this roll over GP 90 FURUNO. Amel 54 #035 Carango has a GP90. The local Furuno rep here is Greenham Regis Lymington. They tell me the GP90 is no

Just looking at Coder (Amel 55#56). My SC30 wasn't impacted, the date time from that is still correct. My GP33 is impacted and as a result the VHF radio shows the wrong time but correct GPS. I need a

Right, Arno. That’s what I was looking at. Cheers Joerg

Dear Manspeter: You are strictly correct about my error calling 50 amp shore power outlets as 60amp outlets in 110 V Marinas. (actually 110-115 v and 220-24 v to be exact) Also, I erroneously wrote

it's apparently a safety bulletin?

Happily. I’ll send. He took about 15 restarts in both his laptop and the GP150 before the update would go through. And then it did. Like finding the hammer in the drawer on the 15th look. Porter

On Tue, Jan 11, 2022 at 3:09 AM Scott SV Tengah <Scott.nguyen@...> wrote: Did he charge for this service ? Mind giving me his contact info? I have the software and instructions for the gp150 and the

Baomain Universal Rotary Changeover Cam Switch SZW26-63/D303.3D 660V 63A 3 Position 3 Phase with Master Switch Exterior Box LW28-63/4 (can be obtained on Amazon, or a chandlery for 4X as much; BlueSea

Great solution that's more elegant than my intended manual rewiring. Can you post a link to the switch you used?-- Scott 2007 A54 #69 SV Tengah http://www.svtengah.com

Scott, Our Quattro, installed last October, functions as you stated with reference to frequency. Our solution is similar, we installed a Skylla-IP65 24/35 120-240V charger with a high capacity switch

Absolutely right. I asked my high level Victron contact if I could have my 2018 vintage Quattro take 240v/60hz shore power and just use it to charge, but NOT pass it through. He said “no”.

Hi Joerg, Here is the software update log for the autopilot Cheers, Arno

Another important "watch-out" if you have a Victron Multi-Plus. Even if you have set the inverter to produce 50hz power, if the inverter "sees" the shore power frequency on the 240v input side of the

HydraNet is in short supply from Dimension Polyant in Germany and delivery by all sailmakers is impacted. The unreliable delivery of HydraNet from Dimension Polyant (DP Germany) has been going on for

Arno, thanks for the reminder to check on software updates. I looked at the history and the update you must be referencing was in February 2015 so should have been done on my 2016 system. But I’ll

Did he charge for this service ? Mind giving me his contact info? I have the software and instructions for the gp150 and the data cable for data4, but am having trouble getting the update software to