Learn something new everyday. 😃😃 Best, CW Bill Rouse Amel Owners Yacht School +1 832-380-4970 | brouse@... 720 Winnie, Galveston Island, Texas 77550 www.AmelOwnersYachtSchool.com Yacht School

There is a good facebook group called Solar in a Boat. Check it out! When you glue you have to do it the right way... Eg panels MUST be well glued. Otherwise very high temps (if air bubbles under the

Reudi. You Can use the autoprop puller to remove the fixed prop. Use the bolt holes, align with the base of the fixed prop blades and then “sew” the puller to the base of the blades using 5-7mm

Hi Joerg, To answer your question, charging to 100% is OK for Lithium Iron Phosphate batteries (LiFePO4), which is the chemistry Elon refers to by "iron pack". Edit: By nickel, he refers to

Charging to 100% and keeping at 100% are two different things.-- Scott 2007 A54 #69 SV Tengah http://www.svtengah.com

Be sure to check with your insurance company before changingyour battery technology. You may find yourself with a voided policy if you filea claim. Some insurance companies now have very strict

LifePO4 are a new technology for cars … it was too expensive . I am changing my battery bank for 4x200 A / 24v Mastervolt LifePO4 batteries. Envoyé de mon iPhone

I’m reading an article in the Wall Street Journal this morning about Lithium Iron Phosphate batteries become the prevailing battery technology for electric cars in China. The article includes the

Hi Bill Thank you very much for your answer. The pictures are very useful! In this case I need a lot of grease and some wood pieces to remove it with careful pushes from the front side. Best

On Fri, Jan 14, 2022 at 12:56 AM, Rudolf Waldispuehl wrote: Does anyone experienced the performance of the Original Fixed Prop delivered by AMEL, compared to the Pruntons Autoprop? @ Mohammad,

Nick and all, Q-sails delivered my new Hydranet main and Genoa today. Both sails fit well and the workmanship looks excellent. I was charged exactly the amount in the original quote with the

I'll double up on Bill R's comment about screws and wet core! Screws CAN be done safely, but it has to be done correctly. Just driving screws into the deck WILL cause serious problems. Given the

With regards GP90 I can confirm Nick's message as I too have been in touch with Furuno UK about my GP90. FYI, I have a Furuno NavNet vx2 and RDP149, along with Raymarine AIS700 and Icom IC-M506 DSC

My Rule: Regardless of what you are mounting on the deck of an Amel, never penetrate the deck with a drill or screw unless you are an expert at protecting the balsa core. I have seen far too many

Partial answer: The shaft is tapered with a key. The fixed propeller is also tapered. A tapered-shaft propeller will almost always need a prop-puller to remove. The AutoProp puller is not made for the

Hello, I just got two semi flex solar panels that I will mount on the deck near the main mast. There are 3 possibilities to do that project. With screws, with glue or with tape. Any experience with

Hi Amelias Does anyone experienced the performance of the Original Fixed Prop delivered by AMEL, compared to the Pruntons Autoprop? @ Mohammad, et all I have seen you installed the fix prop

Dear Richie, Few days ago I install new flag on A54 Of my friend, and we buy for him 150x90 cm and it looks very good, as you can see on the photo. Bartek Czarciński Wysłane z iPhone'a

Bill is correct, but I have a yard and a half on my Santorin - 54” on a 46’ boat. It fits exactly on the Amel pole. Anything smaller is not quite proportional in my humble opinion. The practice

Hi All, I have a Feruno GP 90 GPS. Only one of the data ports works. I have been keeping my eye out for a GPS 150 on eBay, but have not had any luck. So I phoned Feruno in the UK to ask about a