Lower transducer of an ultra-sonic knotmeter?

Any thoughts on what the strange plug, on the front of the keel is?

Anyone have an idea how to put the bend back in this hook while in place on the pole? I don't have a vice aboard. I know there's a way, but haven't figured it out yet Thanks Kent & Iris Kristy SM

Mike Litsas at Kalamata did some general rigging and canvas work for me in 2018. Nice guy, good skills, easy to work with and happy to follow the "Amel way". I would definitely work with Mike

We replaced our non-working Interphase unit with the B&G Vulcan and Forward Scan some years ago. Forward Scan works quite well as long as the boat is moving slowly and there is little or no up and

Bob w use it on setting nr 8 it gives maximum 27,2 v so no risk for overcharging. We never hook up to charge for long time as we have solar aboard. I have noticed that what ever charger I have used

Hi Drew, Thank you for the information. Oddly enough my original problem was that the internal cam that is screwed into the knob breaks. I solved this by casting a few dozen in brass. Now I am

Hi Eric, I think the cost to ship it to Holland would be more then the cost of 4 inches of aluminum. I plan on making a tubular piece of aluminum the inside diameter of the foil with a groove

Hi Bill, for some reason a lot of Amel forum emails go to my spam folder, so many that I now check regularly. Despite marking them "not spam" it still happens. Danny SM 299 Ocean

Hi Bill, for some reason a lot of Amel forum emails go to my spam folder, so many that I now check regularly. Despite marking them "not spam" it still happens. Danny SM 299 Ocean

Good to hear Paul, I'm getting ready to make the transitin to lithium batteries. 2 questions (sorry if the answers already exist somewhere in our forum). 1)For lithium, what setting did you use? 2)I

Some more informations may help perhaps: Which browser you are using? Which operating system? Your own settings in the group window? -- Gerhard Mueller Amel Sharki #60 Currently North Sea, Germany

Hi Eric, The latches are Swedish. https://www.onmar.se/en They bought out the original manufacture years ago, and continue to supply the parts. Most of the latches break internally. The knob and

I SEE THE ANSWERS BUT NOT MY ORIGINAL POST. Fair Winds Eric Kimberlite Amel Super Maramu #376

Hi Eric😂 Thanks for the heads-up. I had the screw ( not screwed but only stuck in)in there only to hold up the foil temporarily as I planned to disconnect the manual gearbox . I could not get the

Bill, Thanks, sent a request including your referral. Best, Thomas

THX Gerhard. Best Ulrich. +++ Am 01.02.2022 um 18:42 schrieb Gerhard Mueller via groups.io <carcode@...>: