We used TopSail after Pantaenius withdrew from the US market. Rigging issues were excluded until new standing rigging installed. Excellent geographic coveragel Drew Former Owner SV Revelation

I also have only 1 sheet for my mizzen Ballooner I believe 12 meters wish it was 13 Cheers Courtney Trippin

Our fellow Amelians; We are putting “Loca Lola II” for sale. - 1996 Super Maramu hull number 153 - Canadian registered but will be made available for sale in the US or elsewhere if requested.

Hi Paul, Its easy enough to make soft shackles with a length of dyneema and a fid.... https://www.animatedknots.com/soft-shackle Cheers Alan Elyse SM437

Greets., I have found 6mm too small (for the mainsheet-to-boom attachment, for instance, even though doubled-up), and swapped that for 8mm, retaining the multiple turns (wraps). 10mm for the

Hi JP, If you wanted to know for sure, our mizzen ballooner is in the lazarette under the barbeque and stuff. I'm pretty sure it has only one sheet and it's 10mm polyester about 12m

You can make them fairly easily. The diameter on mine were 4.5 inches and I used 1/8”, 3/16” and 1/4” dyeneema to make them. On Aventura the 1/8 dyneema matches very closely to the original

Jose, I placed my Cerbo in the space behind the main battery switches and mounted it using DIN 35 mm rails. I placed this as well as two relays for starting the generator based on SOC and commands

Hi David, What mm are you finding that will cover most replacements or are you matching mm to load very specifically. All the best, Chuck Joy 388

If anyone is interested, I have an almost complete (no water pump or alternator) 4jh3hte for sale with the transmission. It had 7,000 hours on it and I just decided to change it . It did not have any

Ooops… wrong email addy...

Hi David, I did this 7 years ago. Still looking good and avoid the “hurtful” noise of metal to metal during a gibe or tack. Cheers, Jean-Pierre Germain jp.germain45@...

Our heavy weather headsail is a 10.5 oz 105% yankee cut sail. It is good to around 50 knots—then the Jordan Drogue. Fair Winds Eric Kimberlite Amel Super Maramu #376

Greets, Are you referring to “soft shackles”? If so, you can buy these at a chandlery, or go to a rigger / sail-maker, and get them made up to spec. We are in the process of replacing all

Hi All, Many of the “endless rope loops” – I don’t know what the technical term is – that secure e.g. the mizzen sheet block to the boom, amongst a number of other things, look to be in

Hi Rick, Regarding the smaller jenny --instead of a 90% I'd recommend maybe a 105 or 110% because 1) you can furl it even smaller and then go to a super reefed main as a tri-sail before going to

Round Table Discussion ZOOM & STREAM - Provisioning your Amel When: 02/26/2022 20:00 to 21:00 (UTC+00:00) UTC Where: Galveston Organizer: Bill Rouse brouse@... 8323804970 Description: All

Greetings, I am in the process of doing a major service (1,000HR / 4YR) on my YANMAR 4JH3-HTE. Due to COVID-related circumstances, I stretched the service interval to 4 YRS and 1,500hours. This

Reminder: Round Table Discussion ZOOM & STREAM - Provisioning your Amel When: 02/26/2022 20:00 to 21:00 (UTC+00:00) UTC Where: Galveston Organizer: Bill Rouse brouse@... 8323804970 An

Dear Chuck and Kim, This company have covered me and a number of other Amel owners. I have no association with him financially. Regards, Trevor Lusty Meaghan