Although my experience is limited, and I have not had to place a claim. But I have been using Jackline through the Gowrie Group as well. So far, great service, good policy coverage. They have been

Hi Thomas, Here is a photo of the top of the staysail. It is attached at the same height as the upper spreader. The running backstays are attached to the inside of the upper spreader. On my other

Mark, The QUAI-GE Solenoid/Relay for Onan/Shore Power was located there during the production of pre-SM2k. Images from my Amel Book: CW Bill Rouse Amel Owners Yacht School +1 832-380-4970 |

Mark, The relay in that location is used to control the source of AC power. When the generator is OFF the relay connects shore power to the AC electric panel. When the generator turns ON, the AC

The relay in the port cockpit locker by the water maker accesspanel. What is it used for? With bestregards, Mark Skipper Sailing Vessel- Cream Puff - SM2K - #275 Currentlycruising -

Thank you. Do you have the normal or the long version of the forward transducer installed? Eloi

Insurance continues to be an on going issue for many. I do have a bit of news, that for us was on the positive side. We have used Markel's Jackline Policy, sold by the Gowrie Group in Annapolis,

In this thread we were discussing 2 particular relays on the Onan. Best, CW Bill Rouse Amel Owners Yacht School +1 832-380-4970 | brouse@... 720 Winnie, Galveston Island, Texas 77550

Mine did not have a delay timer either (#160). That must have been a later model addition. No change in the transfer switch need to be made for the purpose of an inverter/charger, which would only

Mark, You need to be a bit clearer about which relay you are talking about. There are several places on the boat that these Bosch automotive relays are used to do different things. None of them have

What is the purpose of this relay please? I replacedGen/Shore auto switch with a manual rotary switch due to two failures and analmost fire. Is this something I also need to remove? With

Hello, I have both installed and even a total scan. I have no interferences. I am very satisfied with the forward scan Just left Turks&caicos which are very shallow. It was again extremely useful to

Hello, I am also interested in installing a forward scanner, but using already a UDST800 (Airmar), I'm not sure weather both will work without interferences. Does anybody have any experiences with a

Hello everyone, I'm also planning to install a B&G Forward Scan transducer when we go on the hard in 3 weeks. I watched Oliver's installation YouTube attentively. It would be nice to get additional

Hi Chris, Interesting to see your setup. I agree with your concerns.. you might try upwind performance with the stay sail. For my 46ft Maramu the performance is great above 20kts of true wind. Very

Allen, I have had good success with an Airmar P79 transducer for in hull mounting. Airmar makes almost all the transducers, and the only difference between brand is the type of connector used.

Hi Thomas, See Attached word document for my inner forestay set up. Hope this helps you Thomas. Any comments, improvements, concerns whatever please reply with your thoughts. Chris Paul SV

Hi Everyone, I’m looking for a recommendation for an “in-hull” depth/fish finder transducer that’s compatible with a Garmin chart plotter. Just as a backup for the current thru hull Raytheon

This is on ebay

Hi David just to be clear the sail that came with your boat and fits in the Genoa foil is the Balooner some owners have also added a Gennaker but that is a totally different animal.