Pierre Please find attached a picture from the transducers installed in front of the keel. - In the middle of the boat : total scan transducer - immediately on the right is the airman UDST800

Hi Juan, Would it be possible for you to post a couple pictures showing the location of your B&G Forward Scan transducer? From both inside and outside showing the outside position in relation to the

All, I learned this today from a client who ordered HydraNet from Incidence Sails. BTW, his sails were delayed by Incidence Sails because of delivery issues from Dimension Polyant. Comment from

Hello Juan Nice to hear from you Where are you now ? Congratulations for your nice vidéos on YouTube 👏 . I enjoyed watching them last year My SM Amadeus is still in Cap d'Agde , I am satisfied

Perfect.. thanks Mark!

Dennis, Loads on a cross cut sail are very different than those on a radial cut. The weave of the fabric needs to be matched to the loads. Fabrics made for cross cut sails can not be well used for

After trying MANY of the inexpensive toggle switches, in the marine environment and being always disappointed, the ONLY ones I will now buy are the mil-spec water-tight switches from Honeywell. These

Here's a picture of one of the Bowthruster cables on my SM. The jacket is marked 95mm^2: -- Mark McGovern SM #440 Cara Annapolis, MD USA

Woody, They were 95mm^2 on my SM 2004 Hull #440. That's roughly 3/0 AWG. I replaced them with 4/0 when I switched over to LiFePO4 batteries -- Mark McGovern SM #440 Cara Annapolis, MD USA

Does anyone know the battery cable size/gauge of the fat cable from the neg shunt and pos.battery terminal to the battery shut off on a 1997 SM.. which I presume is the same as the Bow Thruster cable?

This switch is not exactly the same switch, but is the same manufacturer and will work. https://www.ebay.com/itm/294796545671?chn=ps&mkevt=1&mkcid=28 How to make the above switch work: Replacement

Denis, It is a good question. I do not have any experience with crosscut HydraNet, so the answer you seek needs to come from someone with experience. There is HydraNet and Radial Hydranet. These are

Hello Bill, May I ask a question that puzzles me : Cross cut with no battens (or short battens) was said to be the best choice for trouble free in mast furling. To keep a good shape and that good in

Ralph, Wolfgang and Billy, Ok I understand, thank you for your support. Best regards, Dean SV Stella A540154

OK!! Bill CW Bill Rouse Amel Owners Yacht School +1 832-380-4970 | brouse@... 720 Winnie, Galveston Island, Texas 77550 www.AmelOwnersYachtSchool.com View My Training Calendar

I got an update today. I ordered Pro radial at the beginning of December 2021. They apparently have the material and it will be ready to ship next week. Fingers crossed! -- Jason Rutledge SV

Can confirm this experience on my 55. No password. Billy

Hi All, you need no User and Password. The Softwareupdate is storing all your stettings at the beginning and then restoring it after the update. I had nothing to manualy set after the update. All

I think we've all had one of those bolts stuck like he had on the turbocharger :) Great video, thanks for sharing With best regards,MarkSkipperSailing Vessel - Cream Puff - SM2K

Hi Dean and Ralph, You are right there are two different passwords. I found one for service on the internet and it worked ( 6 ? numbers) fine. I have it on the boat in La Rochelle, but I am now in