Kimberly, Parts for engines, (parts4engines.com) has the freshwater pump in stock for 95 pounds. They have been quick to ship items to me. I ordered a gasket set yesterday for my series 200

Thanks Nick. Respectfully; Mohammad Shirloo +1-323-633-2222 Cell +1-424-644-0908 Fax From: main@AmelYachtOwners.groups.io <main@AmelYachtOwners.groups.io> on behalf of Nick Newington via groups.io

Hi Mohammad, Look back to a thread from 18/05/2022 about Thermal Overload Protectors fitted on some 54’s but not my hull 019. It is illuminating.. Kind regards Nick S/Y Amelia Turkey AML54-019

Thanks to all who participated. BTW, The last generation of the Genoa furler was used on the SN & SM. It seems that the consensus of opinion is that these are not really needed. CW Bill Rouse Amel

Thank you Respectfully; Mohammad Shirloo +1-323-633-2222 Cell +1-424-644-0908 Fax From: main@AmelYachtOwners.groups.io <main@AmelYachtOwners.groups.io> on behalf of Ruslan Osmonov via groups.io

Bill Photos of Santorin forestay bush. 27 mm and 37 mm with a 10 mm forestay Best wishes Ian

Hi Rusian, Yes, all black water hose will become permeated with bad smells after time and you clearly do not need to replace the ball valve. A much better option, and what I did many years ago, is

Kent, Thanks. Bill CW Bill Rouse Amel Owners Yacht School +1 832-380-4970 | brouse@... 720 Winnie, Galveston Island, Texas 77550 www.AmelOwnersYachtSchool.com View My Training Calendar

Thanks James for your help also! Here is the info on our engine... It's actually made in Pakistan! Surprising! serial number GA00270V38990G.. So GA=4.154, V=Pakistan, G=1980 Thanks also for reminding

Thank you Danny for your reply. We did check that it wasn't any of the hoses or clips, etc first. We've found a hole in the fresh water pump ( see photo below) and now it's a struggle to get the nuts

Could these work? RKURCK 3 Amps Thermal Circuit Breakers 125/250V AC 32V DC Push Button Manual Reset Overload Protector Switch 3A 2 Pack

Start with Stuart Dodd of Global Marine. stu4boats@... Ian & Margaret Loca Lola II SM153

Hi all, I am looking for some trusted resources in the Ft Lauderdale area for a few service. I have been in contact with a few people related to these areas but am not getting good results. 1). I need

Hi Mohammad, I believe those are heat protectors. Take a look at this thread. https://amelyachtowners.groups.io/g/main/topic/91136114#63435 -- Fair winds Ruslan Osmonov Phanthom, A54 #44

Hi, looking to find out the exact function of the attached that is wired in line before the main solenoids that activate the main Furler and outhaul motors. We were having issues with both motors. We

By now I don’t have any Climma unit anymore. The saloon and aft units are now Frigomar inverter units and the front one was replaced just before I bought the boat by a Webasto. Functionally the

And when you are adding that new fuse-holder + fuse don't forget to follow the Amel protocol of zipping a spare fuse to the cable nearby. If you do this then it is (almost) guaranteed that the fuse

Hi Eric, Hope all is well. As my Climma units die, I have been replacing them with Webasto FCF Platinum units. I am very happy with these. My oldest

Has anyone replaced the Climma compact 9eh unit in the saloon? I replaced the aft cabin one with a Dometic, but it will not fit under the seat in the saloon. Fair Winds Eric Kimberlite Amel Super

Hi Miles, I had 4 great crewmembers this trip. All new to an Amel. Did you check with OPO? Kindest Regards, Eric